Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX067969R9999 ABB ED158 Cross Bar 2PW
ABB ED158 Cross Bar 2PW is a manufacturer-designated cross-bar accessory for compatible ABB DESUJ low-voltage sub-distribution assemblies requiring a two-panel-width configuration.
£73.12
Why Choose the ABB ED158 Cross Bar 2PW?
The ABB ED158 is a dedicated cross-bar accessory for compatible low-voltage electrical distribution assemblies. Part of ABB's DESUJ Sub Distribution product group, this component is intended for use in distribution panel arrangements requiring a matching cross bar with a 2PW panel-width configuration.
Cross-bar components form part of the mechanical arrangement of electrical distribution equipment, helping panel builders establish the intended layout and integration of associated assembly components. The ABB ED158 Cross Bar 2PW provides a manufacturer-designated accessory for compatible ABB sub-distribution systems, supporting consistent component selection during electrical panel construction, refurbishment and maintenance.
Identified by ABB manufacturer order code 2CPX067969R9999, the ED158 is suitable for projects requiring the specified cross-bar arrangement. Its 2PW designation identifies the corresponding two-panel-width configuration, allowing installers and panel builders to distinguish it from accessories intended for other distribution panel layouts.
Whether specified for a new electrical distribution assembly or as a replacement component, the ABB ED158 supports a coordinated approach to panel construction using compatible manufacturer-designated accessories. The exact equipment compatibility, mounting arrangement and mechanical function should be confirmed against the relevant ABB distribution system documentation.
Key Advantages
- Dedicated cross-bar accessory for compatible ABB electrical distribution assemblies.
- 2PW panel-width configuration for the corresponding two-panel-width arrangement.
- Supports the mechanical integration of associated distribution system components.
- Helps maintain an organised and consistent electrical panel layout.
- Designed for use with compatible ABB DESUJ Sub Distribution equipment.
- Provides a manufacturer-designated component for the specified assembly configuration.
- Supports consistent component selection during electrical panel construction.
- Suitable for new distribution assemblies, maintenance and refurbishment projects.
- Helps simplify replacement component identification using the ABB model and order code.
- ABB-manufactured accessory for professional electrical distribution installations.
Key Features
- ABB ED158 Cross Bar 2PW.
- Dedicated cross-bar component for compatible electrical distribution assemblies.
- 2PW panel-width designation.
- Associated with a two-panel-width distribution system arrangement.
- Part of the ABB DESUJ Sub Distribution product group.
- Intended for integration with matching ABB distribution assembly components.
- Supports the intended mechanical arrangement of compatible equipment.
- Suitable for electrical panel building and assembly maintenance.
- Manufacturer model reference ED158.
- ABB order code: 2CPX067969R9999.
Reliable Cross-Bar Integration for Electrical Distribution Assemblies
Low-voltage electrical distribution systems incorporate a range of components, including protective devices, switching equipment, busbars, mounting structures, covers and associated installation accessories. These components must be arranged within a suitable panel structure to support the intended electrical and mechanical configuration. Manufacturer-designated assembly accessories help panel builders select components that correspond to the required equipment layout.
The ABB ED158 is identified as a 2PW cross bar within ABB's DESUJ Sub Distribution product group. This designation distinguishes it from cross-bar accessories intended for different panel-width configurations. When used within its specified assembly arrangement, the ED158 forms part of the associated distribution system construction.
Correct component selection is particularly important when assembling or modifying electrical distribution panels. The intended mounting positions, fixing methods and associated equipment must correspond to the manufacturer's system design. Before installing the ED158, panel builders should confirm that the cross bar is suitable for the relevant ABB distribution assembly and that the required supporting components are available.
The term cross bar does not, by itself, establish that the ED158 is a current-carrying busbar. No independent current rating, conductor cross-section, insulation performance or short-circuit withstand rating is established by the supplied product designation. These characteristics should not be assumed without the applicable ABB technical documentation.
The ED158 is an assembly accessory rather than a protective circuit breaker or switching device. The electrical protection, mechanical integrity, accessibility and safety of the completed installation depend on the complete distribution system and its correctly selected and installed components.
Typical Applications
- Compatible ABB low-voltage electrical distribution boards.
- ABB DESUJ sub-distribution assembly construction.
- Two-panel-width electrical distribution equipment arrangements.
- Industrial electrical distribution panel installations.
- Commercial building power distribution assemblies.
- Electrical switchgear and distribution equipment manufacturing.
- Integration of compatible electrical panel assembly components.
- Modular electrical distribution panel construction.
- OEM electrical distribution equipment projects.
- Replacement of compatible 2PW cross-bar accessories.
- Electrical distribution board refurbishment and maintenance.
- Professional electrical panel building and assembly servicing.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine N | |
|---|---|---|
| Device Type | Accessory | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX067969R9999 | |
| Product designation | ED158 Cross Bar 2PW | |
| Product type | Cross-bar accessory | |
| Panel-width designation | 2PW | |
| Panel configuration | Two-panel-width arrangement | |
| Component category | Electrical distribution assembly accessory | |
| Associated equipment | Compatible ABB sub-distribution system components | |
| System application | Low-voltage electrical distribution assemblies | |
| Installation | Integration within a compatible ABB distribution assembly | |
| Component function | Cross-bar component for the designated distribution system arrangement |
Frequently Asked Questions
What is the ABB ED158 used for?
The ABB ED158 is a cross-bar accessory intended for compatible ABB electrical sub-distribution assemblies. It is designated for a 2PW panel-width configuration and forms part of the associated distribution system arrangement.
What does 2PW mean on the ABB ED158?
2PW identifies the two-panel-width configuration associated with the ED158 within the compatible ABB distribution assembly system. The designation should be matched to the intended panel arrangement when selecting the accessory.
Which ABB product range does the ED158 belong to?
The ED158 belongs to ABB's DESUJ Sub Distribution product group, which includes components and accessories for compatible electrical distribution assemblies.
Is the ABB ED158 a current-carrying busbar?
The ED158 is specified as a cross bar. This designation alone does not confirm that it is a current-carrying busbar. Its precise mechanical or electrical function should be established using the relevant ABB technical documentation before installation.
Can the ABB ED158 be used with any electrical distribution panel?
The ED158 is intended for compatible ABB sub-distribution assemblies. The panel-width configuration, associated equipment and mounting requirements must be checked against the applicable ABB system documentation before use.
Does the ABB ED158 provide overload or short-circuit protection?
No. The ED158 is identified as a distribution assembly cross-bar accessory, not as a protective circuit breaker. Overload and short-circuit protection must be provided by appropriately selected protective devices within the completed electrical installation.
What is the ABB order code for the ED158?
The ABB manufacturer order code is 2CPX067969R9999. This code identifies the ED158 Cross Bar 2PW for product specification, ordering and replacement purposes.
What should be checked before installing the ABB ED158?
Before installation, confirm the 2PW distribution panel configuration, compatibility with the associated ABB assembly components, the required fixing arrangement and any applicable installation instructions. The complete assembly should be installed and checked by suitably qualified personnel.
Trusted by Electrical Panel Builders and Installers
ABB electrical distribution accessories support organised and consistent panel construction across commercial and industrial applications. The ED158 Cross Bar 2PW provides a dedicated component for compatible ABB sub-distribution assemblies, helping electrical panel builders maintain the intended equipment arrangement and select matching accessories for professional installations.
