Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AG1304 T4/5 circuit breaker equipment cover measuring 250 mm wide by 450 mm high with a 1PW configuration, designed for compatible ABB DESUJ sub-distribution assemblies incorporating Tmax T4 or T5 equipment.
£59.18
The ABB AG1304 is a purpose-designed Tmax T4/T5 circuit breaker cover for electrical distribution assemblies, intended for integration into compatible ABB low-voltage sub-distribution systems. Part of ABB's DESUJ Sub Distribution product group, this cover provides a dedicated panel-facing component for distribution board arrangements incorporating ABB Tmax T4 or T5 moulded case circuit breaker equipment.
Featuring a T4/5 equipment designation, the AG1304 is associated with compatible ABB Tmax T4 and T5 circuit breaker installation arrangements. Its nominal dimensions of 250 mm wide × 450 mm high and 1PW panel-width configuration identify the corresponding distribution panel format. The cover supports the organised presentation and finishing of circuit breaker sections within compatible electrical distribution assemblies.
Identified by ABB manufacturer order code 2CPX064157R9999, the ABB AG1304 T4/5 Cover 250 × 450 mm 1PW is suitable for electrical panel construction, circuit breaker equipment integration, maintenance and refurbishment projects. It provides a clearly identified manufacturer accessory for panel builders and electrical installers working with compatible ABB sub-distribution equipment.
ABB's Tmax moulded case circuit breaker range is used in low-voltage electrical distribution systems for circuit protection and switching applications. The T4 and T5 frame designations identify different circuit breaker sizes within this family. When these devices are installed in distribution panels, compatible mounting structures, covers and other assembly accessories are required to accommodate the intended equipment arrangement.
The ABB AG1304 is specifically identified as a T4/5 cover with nominal dimensions of 250 mm × 450 mm and a 1PW configuration. These characteristics help electrical panel builders distinguish the product from covers intended for other circuit breaker frames, equipment layouts or panel dimensions. Selecting the correct manufacturer-designated cover supports a consistent installation and helps maintain the intended panel-facing arrangement.
The AG1304 is a distribution assembly accessory rather than a circuit breaker or protective trip unit. It does not independently provide overload protection, short-circuit interruption or electrical isolation. Those functions depend on the separately installed circuit breaker and associated electrical equipment. Likewise, the degree of protection against contact with live parts depends on the complete enclosure and assembly design, including the cover's correct installation.
Before fitting the AG1304, installers should confirm compatibility with the particular Tmax T4 or T5 breaker arrangement, associated mounting components and ABB distribution system. The cover's exact fixing arrangement, permissible equipment configuration and any requirements for operating access should be checked against the applicable manufacturer documentation.
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX064157R9999 | |
| Product designation | AG1304 T4/5 Cover 250w x 450h 1PW | |
| Product type | Circuit breaker equipment cover | |
| Equipment designation | T4/5 | |
| Associated circuit breaker family | ABB Tmax T | |
| Associated equipment frames | T4 and T5 | |
| Nominal width | 250 mm | |
| Nominal height | 450 mm | |
| Panel-width designation | 1PW | |
| Component category | Electrical distribution assembly cover | |
| Application | Compatible ABB Tmax T4/T5 distribution equipment arrangements | |
| Installation type | Integration within a compatible electrical distribution panel | |
| Component function | Covering and finishing the designated T4/T5 equipment section |
The ABB AG1304 is a cover designed for compatible ABB electrical sub-distribution assemblies incorporating Tmax T4 or T5 circuit breaker equipment. It provides a designated covering arrangement for a 250 mm × 450 mm, 1PW panel section.
The ABB AG1304 has nominal dimensions of 250 mm wide × 450 mm high. It is specified for a 1PW panel-width configuration.
T4/5 identifies the associated ABB Tmax T4 and T5 moulded case circuit breaker frames. The AG1304 is intended for compatible distribution assembly arrangements involving these equipment sizes. The exact breaker configuration should be checked against the relevant ABB system documentation.
1PW identifies the single-panel-width configuration associated with the AG1304 within the compatible ABB distribution assembly system. It should be matched to the intended panel layout when selecting the cover.
The ABB AG1304 is specified as a T4/5 cover, not as a complete moulded case circuit breaker assembly. The required Tmax circuit breaker, mounting components and other associated equipment must be selected separately as applicable.
No. The AG1304 is a distribution panel cover and does not independently provide overload protection, short-circuit protection or electrical isolation. These functions depend on the installed circuit breaker and the complete electrical distribution system.
The ABB manufacturer order code is 2CPX064157R9999. This identifier can be used when specifying, ordering or replacing the AG1304 T4/5 Cover 250 × 450 mm 1PW.
The AG1304 is intended for compatible ABB sub-distribution assemblies. The circuit breaker arrangement, cover dimensions, 1PW panel configuration, mounting requirements and associated system components should be checked against the relevant ABB documentation before installation.
ABB electrical distribution accessories support organised and dependable panel construction in commercial and industrial installations. The AG1304 T4/5 Cover provides a dedicated covering solution for compatible ABB sub-distribution assemblies, supporting consistent circuit breaker integration within a 250 mm × 450 mm, 1PW panel arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.