Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX064156R9999 ABB ED167 T4 3P T5 4P Mounting Plate 2PW
ABB ED167 2PW circuit breaker mounting plate designed for compatible ABB DESUJ electrical sub-distribution assemblies incorporating Tmax T4 3-pole or Tmax T5 4-pole equipment arrangements.
£39.00
Why Choose the ABB ED167 T4 3P / T5 4P Mounting Plate 2PW?
The ABB ED167 is a dedicated circuit breaker mounting plate for compatible ABB Tmax T4 and T5 equipment, designed for integration into low-voltage electrical distribution assemblies. Part of ABB's DESUJ Sub Distribution product group, this mounting plate supports the installation and mechanical arrangement of moulded case circuit breakers within compatible electrical distribution panels.
The ED167 is specifically designated for Tmax T4 3-pole (3P) and Tmax T5 4-pole (4P) circuit breaker arrangements. Its 2PW panel-width configuration identifies the corresponding distribution assembly format, helping electrical panel builders select the appropriate mounting component for the intended breaker installation. The plate forms part of the mechanical installation arrangement rather than the circuit breaker's electrical protection system.
Identified by ABB manufacturer order code 2CPX064156R9999, the ABB ED167 T4 3P / T5 4P Mounting Plate 2PW is suitable for compatible distribution board construction, switchgear assembly, maintenance and refurbishment applications. Its clearly defined equipment and panel-width designations make it a practical component for specifying and replacing mounting hardware in ABB sub-distribution systems.
Key Advantages
- Dedicated mounting plate for compatible ABB Tmax T4 and T5 circuit breaker arrangements.
- T4 3P compatibility designation for three-pole Tmax T4 equipment configurations.
- T5 4P compatibility designation for four-pole Tmax T5 equipment configurations.
- 2PW panel-width configuration for matching ABB distribution assembly layouts.
- Supports the mechanical installation of compatible moulded case circuit breakers.
- Helps maintain an organised and consistent circuit breaker mounting arrangement.
- Provides a manufacturer-designated component for the specified distribution panel configuration.
- Suitable for electrical panel construction, equipment replacement and refurbishment.
- Supports integration with compatible ABB DESUJ sub-distribution components.
- ABB-manufactured mounting accessory for professional electrical distribution assemblies.
Key Features
- ABB ED167 circuit breaker mounting plate.
- Designed for compatible ABB Tmax T4 3-pole circuit breaker arrangements.
- Also designated for compatible ABB Tmax T5 4-pole circuit breaker arrangements.
- 2PW panel-width designation.
- Dedicated mechanical mounting component for electrical distribution equipment.
- Intended for use within compatible low-voltage sub-distribution assemblies.
- Part of the ABB DESUJ Sub Distribution product group.
- Supports the positioning and integration of the specified circuit breaker equipment.
- Suitable for electrical panel building and distribution board maintenance.
- ABB order code: 2CPX064156R9999.
Reliable Mounting Integration for ABB Tmax T4 and T5 Circuit Breakers
ABB's Tmax moulded case circuit breaker range is used in low-voltage electrical distribution systems for circuit protection and switching applications. The T4 and T5 frame designations identify different breaker sizes within the Tmax family, while the 3P and 4P designations distinguish three-pole and four-pole equipment configurations. Correct mounting arrangements are important when integrating these devices into electrical distribution panels.
The ABB ED167 is specifically identified as a T4 3P / T5 4P mounting plate with a 2PW configuration. This combination distinguishes the product from mounting plates intended for other breaker frames, pole arrangements or panel widths. Selecting the correct manufacturer-designated mounting plate helps electrical panel builders establish the intended mechanical installation layout and maintain consistency with the associated ABB distribution assembly system.
A properly selected mounting plate forms part of the physical support arrangement for the installed circuit breaker. However, the mechanical suitability of the completed installation also depends on the breaker version, associated mounting hardware, panel structure and manufacturer's assembly instructions. The ED167 should therefore be matched to the complete distribution system configuration before installation.
The mounting plate itself does not provide overcurrent protection, short-circuit interruption or electrical isolation. These functions are performed by the correctly selected circuit breaker and associated equipment. The completed assembly's electrical clearances, accessibility, mechanical integrity and degree of protection depend on the overall design and installation.
Typical Applications
- Low-voltage distribution boards incorporating compatible ABB Tmax T4 3-pole circuit breakers.
- Electrical distribution assemblies incorporating compatible ABB Tmax T5 4-pole circuit breakers.
- ABB DESUJ sub-distribution panel construction.
- Two-panel-width circuit breaker mounting arrangements.
- Industrial electrical distribution panels.
- Commercial building electrical power distribution systems.
- Moulded case circuit breaker installation and integration projects.
- Electrical switchgear and distribution equipment assembly.
- OEM electrical panel and distribution board manufacturing.
- Replacement of compatible T4 3P / T5 4P mounting plates.
- Electrical distribution board refurbishment and maintenance.
- Modular electrical distribution equipment construction.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine N | |
|---|---|---|
| Device Type | Mounting / Expansion Module | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX064156R9999 | |
| Product designation | ED167 T4 3P T5 4P Mounting Plate 2PW | |
| Product type | Circuit breaker mounting plate | |
| Associated circuit breaker family | ABB Tmax T | |
| First equipment designation | T4 3P | |
| Second equipment designation | T5 4P | |
| Associated pole configurations | 3-pole and 4-pole, according to the designated breaker frame | |
| Panel-width designation | 2PW | |
| Component category | Electrical distribution assembly mounting accessory | |
| Application | Compatible ABB Tmax T4 and T5 circuit breaker installation arrangements | |
| Installation type | Mechanical integration within a compatible distribution panel assembly | |
| Component function | Mounting plate for the designated circuit breaker equipment configuration |
Frequently Asked Questions
What is the ABB ED167 used for?
The ABB ED167 is a mounting plate designed for compatible ABB electrical sub-distribution assemblies incorporating Tmax T4 3-pole or Tmax T5 4-pole circuit breaker arrangements. It provides a designated mechanical mounting component for a 2PW panel configuration.
Which ABB circuit breakers are associated with the ED167 mounting plate?
The ED167 is specifically designated for ABB Tmax T4 3P and ABB Tmax T5 4P equipment arrangements. Compatibility with a particular breaker installation should be confirmed against the relevant ABB distribution assembly documentation.
What do T4 3P and T5 4P mean?
T4 and T5 identify circuit breaker frames within ABB's Tmax moulded case circuit breaker family. 3P means three-pole, while 4P means four-pole. The ED167 product designation identifies the corresponding mounting arrangements for these breaker configurations.
What does 2PW mean on the ABB ED167?
2PW identifies the two-panel-width configuration associated with the ED167 within the compatible ABB distribution assembly system. This designation should be matched to the intended panel layout when selecting mounting components.
Does the ABB ED167 include a Tmax circuit breaker?
The ABB ED167 is specified as a mounting plate, not as a complete circuit breaker assembly. The required Tmax T4 or T5 circuit breaker and any associated installation hardware should be specified separately as applicable.
Does the ABB ED167 provide electrical protection?
No. The ED167 is a mechanical mounting accessory and does not independently provide overload protection, short-circuit protection or electrical isolation. These functions depend on the installed circuit breaker and the complete electrical distribution system.
What is the ABB order code for the ED167?
The ABB manufacturer order code is 2CPX064156R9999. This identifier can be used when specifying, ordering or replacing the ED167 T4 3P / T5 4P Mounting Plate 2PW.
Can the ABB ED167 be installed in any electrical distribution board?
The ED167 is intended for compatible ABB sub-distribution assemblies. The breaker frame, pole configuration, 2PW panel arrangement, mounting requirements and associated system components must be checked against the relevant ABB installation documentation before use.
Trusted by Electrical Panel Builders and Installers
ABB electrical distribution accessories support organised and dependable panel construction in commercial and industrial installations. The ED167 T4 3P / T5 4P Mounting Plate 2PW provides a dedicated mounting solution for compatible ABB sub-distribution assemblies, supporting consistent circuit breaker integration and the intended two-panel-width equipment arrangement.
