Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZH415 NH00 fuse disconnector rated at 160 A, designed for fuse-based circuit protection and disconnection within compatible ABB DESUJ low-voltage sub-distribution assemblies.
£397.01
The ABB ZH415 is an NH00 160 A fuse disconnector designed for use in compatible low-voltage electrical distribution assemblies. Part of the ABB DESUJ Sub Distribution product group, this device provides a practical solution for integrating NH fuse equipment and circuit disconnection functionality into professional electrical distribution installations.
Designed for electrical panel builders, contractors and maintenance professionals, the ZH415 supports the installation of compatible NH00 fuse equipment in electrical distribution systems. Its 160 A rated current and NH00 fuse size make it suitable for applications requiring appropriately selected fuse links for overcurrent protection and a compatible disconnection arrangement.
Identified by ABB order code 2CPX062951R9999, the ZH415 is a genuine ABB electrical distribution component intended for integration into suitable sub-distribution assemblies. It supports professional panel construction, electrical distribution system configuration and maintenance applications where the specified NH00 fuse disconnector arrangement is required.
NH fuse disconnectors are used in low-voltage electrical distribution systems where fuse-based overcurrent protection and circuit disconnection are required. These devices accommodate compatible NH fuse equipment and provide a means of disconnecting an associated circuit within the limits of their approved electrical and operating characteristics. When appropriately rated fuse links are installed, the fuse system provides protection against excessive current.
The ABB ZH415 is specified as an NH00 fuse disconnector rated at 160 A. This configuration supports integration into compatible electrical distribution assemblies using NH00 fuse equipment, including fuse-protected distribution circuits and designated fuse disconnection sections within electrical panels.
The 160 A device rating must not be confused with the rating of an installed fuse link. Fuse selection must account for circuit requirements, conductor protection, prospective fault current and the applicable electrical installation standards. The device's voltage rating, pole configuration, switching category, short-circuit characteristics, mounting arrangement and fuse-link inclusion should be confirmed against ABB technical documentation before installation. Electrical installation and maintenance should be performed by suitably qualified personnel.
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine N | |
|---|---|---|
| Current | 160 A | |
| Product group | DESUJ Sub Distribution | |
| Product type | NH fuse disconnector | |
| ABB order code | 2CPX062951R9999 | |
| Manufacturer part number | ZH415 | |
| Rated current | 160 A | |
| NH fuse size | NH00 | |
| Device function | Fuse disconnection | |
| Protection arrangement | NH fuse-based overcurrent protection with suitably selected fuse links | |
| Application | Low-voltage electrical distribution systems | |
| Installation | Compatible ABB sub-distribution assemblies | |
| Component category | NH fuse disconnectors and electrical distribution accessories |
The ABB ZH415 is an NH00 fuse disconnector designed for compatible low-voltage electrical distribution assemblies. It supports fuse-based circuit protection and provides a disconnection function for suitably configured electrical circuits.
The ABB ZH415 has a specified rated current of 160 A. The appropriate fuse-link rating must be selected according to the electrical circuit requirements and the manufacturer's specifications.
The ZH415 is specified for NH00 fuse equipment. NH00 is a standard NH fuse size used in compatible low-voltage fuse protection and disconnection systems.
An NH fuse disconnector provides the equipment arrangement and disconnection function for a compatible fuse-protected circuit. An NH fuse link is the replaceable protective component that interrupts excessive current according to its electrical characteristics.
The supplied specification identifies the ZH415 as an NH00 160 A fuse disconnector but does not confirm whether fuse links are included. Package contents and required fuse links should be checked against ABB documentation and the supplier's listing before purchase.
The ZH415 is intended for compatible ABB sub-distribution assemblies. Installation suitability depends on the electrical ratings, mounting arrangement, connections, enclosure configuration and applicable manufacturer documentation.
The ZH415 is identified as a fuse disconnector, but its specific load-switching capability and utilisation category are not established by the supplied specification. Whether it may be operated under load must be confirmed from the applicable ABB technical documentation.
The official ABB order code is 2CPX062951R9999, identifying the ZH415 NH00 160 A Fuse Disconnector in the ABB DESUJ Sub Distribution product group.
ABB electrical distribution components support professional panel construction, fuse-based circuit protection and electrical system maintenance. The ABB ZH415 NH00 160 A Fuse Disconnector provides a dedicated disconnection solution for compatible NH00 fuse distribution arrangements, supporting organised and dependable low-voltage electrical installations when correctly selected and installed.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.