Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AG164 is a 250 x 300 mm electrical distribution board meter cover with a 1PW configuration, designed for compatible ABB low-voltage sub-distribution assemblies incorporating electrical metering equipment.
£45.54
The ABB AG164 is a purpose-designed meter cover for electrical distribution boards, intended for use with compatible low-voltage electrical distribution assemblies incorporating metering equipment. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this accessory provides a dedicated covering solution for professional electrical panel builders, electrical contractors and switchgear manufacturers.
Featuring nominal dimensions of 250 mm wide × 300 mm high, the AG164 is specified for a 1PW cover configuration. Its meter cover designation identifies it as an accessory intended for compatible electrical metering arrangements. The compact rectangular format makes it relevant to designated distribution board sections requiring the specified cover dimensions and a suitable metering equipment layout.
Identified by ABB order code 2CPX062890R9999, the AG164 supports accurate accessory selection for new electrical installations, distribution board construction, metering panel refurbishment and replacement work. Its combination of a 250 mm width, 300 mm height and 1PW designation helps panel builders identify the correct cover for compatible ABB sub-distribution assemblies.
Metering equipment plays an important role in low-voltage electrical distribution systems, supporting the measurement and monitoring of electrical energy and other operating parameters. Distribution board accessories intended for metering sections must be selected to suit the specific equipment arrangement, available installation space and applicable assembly requirements. Correct cover selection helps maintain a consistent panel layout and the intended mechanical arrangement around the installed metering components.
The ABB AG164 combines a 250 mm width with a 300 mm height and is designated for a 1PW cover arrangement. Its compact rectangular format makes it relevant to compatible distribution board sections requiring a meter cover of these dimensions. The meter cover designation identifies its intended application, although precise meter compatibility, aperture geometry and any viewing or operating provisions must be confirmed from ABB technical documentation.
Unlike a general-purpose solid cover or a slotted cover intended for modular electrical devices, the AG164 is specifically identified as a meter cover. This distinction is important when selecting accessories for electrical distribution assemblies because different cover types may have different opening arrangements, mounting requirements and intended equipment applications. Matching nominal dimensions alone does not establish interchangeability.
The AG164 also differs from the ABB AG163 meter cover, which measures 750 × 150 mm and carries a 3PW configuration. Although both products are intended for compatible electrical metering sections, their dimensions and configurations differ. Selection should therefore be based on the specified ABB assembly arrangement rather than the general meter cover designation alone.
As part of the ABB DESUJ Sub Distribution accessory range, the AG164 supports professional panel-building, switchgear assembly and metering equipment installation. Before installation, verify the 250 × 300 mm dimensions, 1PW configuration, meter compatibility, mounting positions, access requirements and necessary fixing hardware against the relevant ABB technical documentation. The AG164 is a mechanical cover accessory rather than an electrical meter or standalone protective device. Any required ingress protection rating, protection against contact with live parts or compliance with applicable electrical assembly standards must be established for the complete installed system.
Tick the specs you need, then view products that match.
| Metering | Metering | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Device Type | Incomer / Metering / Surge Kit | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062890R9999 | |
| Product type | Meter cover | |
| Accessory category | Electrical distribution board metering cover | |
| Cover designation | Meter cover | |
| Nominal width | 250 mm | |
| Nominal height | 300 mm | |
| Cover dimensions (W × H) | 250 × 300 mm | |
| Cover configuration | 1PW | |
| Cover format | Rectangular | |
| Primary function | Covering compatible electrical distribution board metering sections | |
| Intended equipment | Compatible ABB sub-distribution assemblies incorporating metering equipment | |
| Application | Low-voltage electrical distribution and metering systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AG164 Meter Cover 250w × 300h 1PW |
The ABB AG164 is a meter cover intended for compatible ABB low-voltage electrical distribution assemblies incorporating metering equipment. It provides a dedicated covering component for the corresponding distribution board metering section.
The ABB AG164 has nominal dimensions of 250 mm wide × 300 mm high. It is specified for a 1PW cover configuration within compatible ABB sub-distribution equipment.
The 1PW designation identifies the cover configuration associated with the AG164. It should be matched to the corresponding ABB distribution board arrangement. The designation should not be treated as a separate physical measurement without reference to the manufacturer's technical documentation.
The ABB AG164 measures 250 × 300 mm and has a 1PW configuration, while the ABB AG163 measures 750 × 150 mm and has a 3PW configuration. Both are designated as meter covers, but their different dimensions and configurations mean they should not be treated as interchangeable without confirmation from ABB technical documentation.
The ABB order code is 2CPX062890R9999. Before installation, confirm the 250 × 300 mm dimensions, 1PW configuration, compatibility with the intended metering equipment, any required openings, mounting positions and necessary fixing hardware. Installation should follow the applicable ABB technical instructions.
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AG164 Meter Cover 250 × 300 mm 1PW provides a dedicated cover for compatible electrical metering sections, helping electrical contractors and panel builders achieve organised equipment coverage, a consistent panel layout and appropriate mechanical integration within low-voltage electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.