Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AG73 is a 250 x 600 mm electrical distribution board cover with a 1PW configuration, designated for compatible ABB sub-distribution assemblies incorporating a 4 x NH00 equipment arrangement.
£69.59
The ABB AG73 is a purpose-designed 4 × NH00 cover for electrical distribution boards, intended for use with compatible low-voltage electrical distribution assemblies incorporating NH00 equipment. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this accessory provides a dedicated covering solution for professional electrical panel builders, electrical contractors and switchgear manufacturers.
Featuring nominal dimensions of 250 mm wide × 600 mm high, the AG73 is specified for a 1PW cover configuration and carries the designation 4 × NH00. This identifies the cover's intended equipment arrangement, making it relevant to compatible distribution board sections designed around four NH00 positions. The precise opening layout, equipment spacing and supported NH00 components should be confirmed against the applicable ABB technical documentation.
Identified by ABB order code 2CPX062875R9999, the AG73 is a dedicated accessory for compatible ABB sub-distribution equipment. Its combination of a 250 mm width, 600 mm height, 1PW configuration and 4 × NH00 designation supports accurate product selection for new installations, distribution board assembly, refurbishment and replacement work.
NH fuse equipment is commonly used in low-voltage electrical distribution systems where suitable fuse-based protection and switching arrangements are required. Distribution board covers associated with NH equipment must be selected to suit the intended assembly layout, equipment dimensions and access requirements. Correct cover selection helps ensure that the completed panel follows its specified mechanical arrangement.
The ABB AG73 is designated as a 4 × NH00 cover, with nominal dimensions of 250 × 600 mm and a 1PW configuration. This makes it relevant to compatible ABB distribution board sections intended for four NH00 equipment positions. The designation describes the intended cover arrangement; it does not, by itself, confirm compatibility with every NH00 fuse switch disconnector, fuse base or other NH00 device.
Unlike a general-purpose solid cover, the AG73 is identified specifically for an NH00 equipment configuration. This distinction is important when selecting distribution board accessories because the cover must correspond with the installed equipment and its required operating or maintenance access. The exact aperture arrangement, mounting details and compatible ABB equipment references should be checked before installation.
As part of the ABB DESUJ Sub Distribution accessory range, the AG73 supports professional electrical panel construction, switchgear assembly and maintenance. Using the correct manufacturer-designated cover helps preserve the intended panel layout and avoids relying solely on matching external dimensions when selecting replacement components.
Before installation, verify the 250 × 600 mm dimensions, 1PW configuration, 4 × NH00 equipment arrangement, mounting positions and required fixing hardware against ABB technical documentation. The AG73 is a cover accessory, not an NH fuse, fuse holder or standalone protective device. Any required ingress protection rating, protection against contact with live parts and electrical assembly compliance must be established for the complete installed system.
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062875R9999 | |
| Product type | NH00 equipment cover | |
| Accessory category | Electrical distribution board cover | |
| Equipment designation | 4 × NH00 | |
| NH equipment size | NH00 | |
| Designated equipment positions | 4 | |
| Nominal width | 250 mm | |
| Nominal height | 600 mm | |
| Cover dimensions (W × H) | 250 × 600 mm | |
| Cover configuration | 1PW | |
| Cover format | Rectangular | |
| Primary function | Covering compatible electrical distribution board sections incorporating the specified 4 × NH00 arrangement | |
| Intended equipment | Compatible ABB sub-distribution assemblies with NH00 equipment | |
| Application | Low-voltage electrical distribution systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AG73 4 × NH00 Cover 250w × 600h 1PW |
The ABB AG73 is a distribution board cover intended for compatible ABB low-voltage electrical assemblies incorporating a 4 × NH00 equipment arrangement. It provides a dedicated cover component for the corresponding panel section.
The ABB AG73 has nominal dimensions of 250 mm wide × 600 mm high. It is specified for a 1PW cover configuration within compatible ABB sub-distribution equipment.
The 4 × NH00 designation identifies a cover intended for an arrangement of four NH00 equipment positions. NH00 refers to an NH fuse equipment size. The exact compatible devices, opening positions and mounting arrangement must be verified against the relevant ABB documentation.
The manufacturer's order code is 2CPX062875R9999, and the product model is AG73. These identifiers can be used when selecting, ordering or replacing the specified ABB distribution board cover.
Compatibility with every NH00 device cannot be assumed. Before installation, confirm that the intended equipment is approved for the ABB AG73 4 × NH00 cover, including its 250 × 600 mm dimensions, 1PW configuration, equipment positions, access requirements and mounting details. Follow the applicable ABB installation instructions.
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AG73 4 × NH00 Cover 250 × 600 mm 1PW provides a dedicated cover for compatible NH00 distribution board arrangements, helping electrical contractors and panel builders achieve organised equipment coverage and consistent mechanical integration within low-voltage electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.