Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX062845R9999 ABB AG225 Solid Cover 500 x 750 mm 2PW
ABB AG225 solid electrical distribution board cover measuring 500 mm wide by 750 mm high with a 2PW configuration, designed to provide continuous protective coverage within compatible low-voltage sub-distribution assemblies.
£93.72
Why Choose the ABB AG225 Solid Cover 500 × 750 mm?
The ABB AG225 is a purpose-designed solid cover for low-voltage electrical distribution boards, providing continuous protective coverage and a neat, professional finish for compatible electrical distribution assemblies. As part of the ABB DESUJ Sub Distribution product range, this cover is intended for electrical panel builders, contractors and installers requiring a dedicated blank cover for distribution board construction, modification and maintenance.
The AG225 features a solid, non-slotted cover design, making it suitable for covering designated areas of electrical distribution assemblies where openings for electrical devices are not required. Its continuous surface helps conceal unused installation spaces and internal distribution components while supporting an organised panel layout. The cover is particularly useful in switchboard construction where consistent coverage is required across a larger distribution board section.
With nominal dimensions of 500 mm wide × 750 mm high and a 2PW configuration, the ABB AG225 is designed for compatible ABB sub-distribution assemblies. Identified by ABB order code 2CPX062845R9999, it provides a practical cover solution for low-voltage distribution equipment, electrical panel refurbishment and professional switchboard installations.
Key Advantages
- Purpose-designed solid cover for electrical distribution board assemblies.
- 500 mm width × 750 mm height for compatible panel configurations.
- 2PW configuration for suitable ABB sub-distribution arrangements.
- Solid, non-slotted construction provides continuous coverage of designated panel areas.
- Helps conceal unused installation spaces and internal distribution components.
- Taller cover format supports coverage across larger distribution board sections.
- Supports an organised and professional electrical panel appearance.
- Suitable for compatible ABB low-voltage sub-distribution systems.
- Useful for electrical panel assembly, modifications and refurbishment projects.
Key Features
- ABB AG225 solid distribution board cover.
- ABB DESUJ Sub Distribution product range.
- 500 mm nominal width.
- 750 mm nominal height.
- 2PW panel configuration.
- Solid cover design without pre-formed device slots.
- Designed to cover designated sections of compatible electrical distribution assemblies.
- Provides a continuous cover surface for suitable blanking applications.
- Supports protective separation between accessible panel areas and internal equipment when correctly installed.
- Suitable for electrical switchboard construction and maintenance.
- ABB manufacturer order code: 2CPX062845R9999.
Reliable Protective Coverage for Electrical Distribution Systems
Electrical distribution boards require appropriately selected protective covers to help separate accessible areas from internal electrical equipment. Solid covers such as the ABB AG225 are particularly useful where designated sections of a distribution panel do not require openings for switches, circuit breakers or other operating devices. Their continuous surface helps maintain an organised appearance while covering unused installation areas.
The ABB AG225 provides a dedicated solid cover solution with 500 mm × 750 mm nominal dimensions and a 2PW configuration. Its taller format is suitable for compatible distribution board layouts requiring coverage across two panel widths and an extended vertical section. Correct cover selection and installation support the intended distribution board arrangement, while the overall protection rating and electrical safety of the completed assembly depend on the associated components and applicable installation requirements.
Typical Applications
- Compatible ABB low-voltage electrical distribution boards.
- Electrical sub-distribution panel assemblies.
- Blanking and covering unused distribution board sections.
- Commercial building electrical distribution systems.
- Industrial electrical switchboards and distribution panels.
- Electrical control cabinet and panel construction.
- Distribution board modifications and refurbishment projects.
- Replacement solid cover installations in compatible ABB assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine N | |
|---|---|---|
| Device Type | Door / Cover / Partition | |
| Product range | DESUJ Sub Distribution | |
| ABB order code | 2CPX062845R9999 | |
| Product type | Solid electrical distribution board cover | |
| Cover design | Solid / non-slotted | |
| Nominal width | 500 mm | |
| Nominal height | 750 mm | |
| Panel configuration | 2PW | |
| Application | Low-voltage electrical sub-distribution assemblies | |
| Installation | Within compatible electrical distribution board assemblies |
Frequently Asked Questions
What is the ABB AG225 solid cover used for?
The ABB AG225 is a solid cover designed for compatible low-voltage electrical distribution assemblies, providing continuous coverage over designated panel areas where openings for electrical devices are not required.
What are the dimensions of the ABB AG225?
The AG225 has nominal dimensions of 500 mm wide × 750 mm high, making it suitable for compatible ABB distribution board configurations requiring a taller cover section.
What does the 2PW designation mean for the ABB AG225?
The 2PW designation identifies a two-panel-width configuration within the ABB distribution equipment range. The AG225 is designed for compatible distribution assemblies requiring a 500 mm wide cover.
What is the difference between the ABB AG225 solid cover and a slotted cover?
The ABB AG225 solid cover provides a continuous surface without pre-formed device slots, while a slotted cover incorporates openings intended to accommodate compatible electrical devices. The appropriate cover depends on the distribution board layout and installed equipment.
What is the ABB order code for the AG225 solid cover?
The manufacturer order code is 2CPX062845R9999, identifying the ABB AG225 solid cover with nominal dimensions of 500 mm × 750 mm and a 2PW configuration.
Trusted by Electrical Panel Builders and Installers
ABB electrical distribution products are used by electrical contractors, switchboard manufacturers and panel builders to support dependable low-voltage power distribution. The ABB AG225 solid cover provides a dedicated solution for compatible distribution board assemblies, helping achieve organised panel layouts, continuous protective coverage and professional electrical installations.
