Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX062837R9999 ABB AG215 Solid Cover 250 x 750 mm 1PW
ABB AG215 is a 250 x 750 mm solid electrical distribution cover with a 1PW configuration, designed for compatible ABB low-voltage distribution boards and switchgear assemblies requiring a continuous cover surface.
£58.79
Why Choose the ABB AG215 Solid Cover 250 × 750 mm 1PW?
The ABB AG215 is a purpose-designed solid cover for electrical distribution boards, intended for use with compatible low-voltage electrical distribution assemblies. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this accessory provides a dedicated covering solution for professional electrical panel builders, electrical contractors and switchgear manufacturers.
Featuring nominal dimensions of 250 mm wide × 750 mm high, the AG215 is specified for a 1PW cover configuration. Its solid design provides a continuous covering surface without designated device operating slots, making it suitable for compatible distribution board sections where a blank cover is required rather than a slotted cover with equipment access openings.
Identified by ABB order code 2CPX062837R9999, the AG215 is a practical accessory for new electrical installations, distribution board construction, refurbishment and replacement work. Its combination of a 250 mm width, 750 mm height and 1PW designation supports accurate component selection when assembling or maintaining compatible ABB sub-distribution equipment.
Key Advantages
- Purpose-designed solid cover for compatible ABB electrical distribution assemblies.
- 250 mm nominal width for the specified distribution board cover arrangement.
- 750 mm nominal height for compatible vertical panel sections.
- 1PW cover configuration for the corresponding ABB distribution system.
- Solid design provides an uninterrupted covering surface without designated device operating slots.
- Suitable for covering designated blank sections and compatible equipment compartments.
- Helps separate covered electrical equipment from surrounding panel areas when correctly installed.
- Narrow, tall rectangular format suits compatible vertically arranged distribution board sections.
- Supports a neat, consistent and organised electrical distribution board layout.
- Genuine ABB model and order code support accurate accessory selection and replacement.
Key Features
- ABB AG215 solid cover for electrical distribution equipment.
- ABB order code 2CPX062837R9999.
- DESUJ Sub Distribution product group.
- 250 mm nominal cover width.
- 750 mm nominal cover height.
- 250 × 750 mm nominal cover dimensions (W × H).
- 1PW cover configuration.
- Solid, uninterrupted cover design.
- Tall rectangular cover format.
- Intended for compatible ABB low-voltage electrical distribution assemblies.
- Supports structured electrical panel construction and equipment coverage.
- Suitable for replacement applications where the AG215 is the specified cover.
Reliable Solid Covering for Electrical Distribution Systems
Solid covers are important mechanical accessories in low-voltage electrical distribution board construction. They provide a continuous covering surface for compatible equipment sections, helping maintain the intended separation between internal electrical components and surrounding panel areas. Correct cover selection also contributes to an organised equipment layout and a consistent finish across the completed electrical distribution assembly.
The ABB AG215 combines a 250 mm width with a 750 mm height and is designated for a 1PW cover arrangement. Its narrow, tall rectangular format makes it relevant to compatible distribution board sections requiring an extended vertical solid cover. Unlike slotted covers that incorporate openings for device operation, the AG215 provides an uninterrupted covering surface for the specified installation.
As part of the ABB DESUJ Sub Distribution accessory range, the AG215 supports professional panel-building, switchgear assembly and electrical maintenance. Selecting the correct solid cover helps maintain consistency with the intended distribution board configuration and reduces the risk of fitting a component with unsuitable dimensions or an inappropriate cover design.
Before installation, verify the 250 × 750 mm dimensions, 1PW configuration, mounting positions, fixing hardware and compatibility with the intended ABB distribution board against the manufacturer's technical documentation. The AG215 is a mechanical cover accessory rather than a standalone electrical protective device. Any required ingress protection rating, protection against contact with live parts or compliance with applicable electrical assembly standards must be established for the complete installed system.
Typical Applications
- Compatible ABB low-voltage electrical distribution boards.
- Electrical distribution assemblies requiring a 1PW solid cover.
- Covering designated blank sections within compatible electrical panels.
- Vertically arranged distribution board sections requiring the specified cover dimensions.
- Commercial building electrical distribution installations.
- Industrial switchgear and power distribution panels.
- Modular electrical distribution equipment assembly.
- Professional electrical panel manufacturing and installation.
- Distribution board refurbishment and solid cover replacement.
- OEM electrical enclosure and switchgear construction.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062837R9999 | |
| Product type | Solid cover | |
| Accessory category | Electrical distribution board cover | |
| Cover design | Solid | |
| Nominal width | 250 mm | |
| Nominal height | 750 mm | |
| Cover dimensions (W × H) | 250 × 750 mm | |
| Cover configuration | 1PW | |
| Cover format | Rectangular | |
| Primary function | Covering compatible electrical distribution board sections | |
| Intended equipment | Compatible ABB sub-distribution assemblies | |
| Application | Low-voltage electrical distribution systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AG215 Solid Cover 250w × 750h 1PW |
Frequently Asked Questions
What is the ABB AG215 solid cover used for?
The ABB AG215 is a solid cover designed for compatible low-voltage electrical distribution assemblies. It provides a continuous covering surface for designated sections of electrical distribution boards and switchgear equipment.
What are the dimensions of the ABB AG215 cover?
The ABB AG215 has nominal dimensions of 250 mm wide × 750 mm high. It is specified for a 1PW cover configuration within compatible ABB distribution equipment.
What is the difference between the ABB AG215 solid cover and the ABB AS214 slotted cover?
The ABB AG215 is a solid cover measuring 250 × 750 mm with a 1PW configuration. The ABB AS214 is a slotted cover measuring 250 × 600 mm, also designated 1PW. They differ in both height and cover design, so they should not be treated as interchangeable without confirmation from the relevant ABB technical documentation.
What is the ABB order code for the AG215 solid cover?
The manufacturer's order code is 2CPX062837R9999, and the product model is AG215. These identifiers can be used when selecting, ordering or replacing the correct ABB distribution board cover.
What should be checked before installing the ABB AG215?
Before installation, verify the 250 × 750 mm cover dimensions, 1PW configuration, compatibility with the intended ABB distribution assembly, mounting positions and required fixing hardware. Installation should follow the applicable ABB instructions, including requirements for electrical clearances and protection against contact with live parts.
Trusted by Electrical Panel Builders Worldwide
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AG215 Solid Cover 250 × 750 mm 1PW provides a dedicated solid cover for compatible distribution board sections, helping electrical contractors and panel builders achieve organised equipment coverage, a consistent panel finish and appropriate mechanical integration within low-voltage electrical distribution systems.
