Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AS214 is a 250 x 600 mm slotted electrical distribution cover with a 1PW configuration, designed for compatible ABB low-voltage distribution boards and switchgear assemblies requiring designated equipment openings.
£56.66
The ABB AS214 is a purpose-designed slotted cover for electrical distribution boards, intended for use with compatible low-voltage electrical distribution assemblies. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this accessory provides a dedicated covering solution for professional electrical panel builders, contractors and switchgear manufacturers requiring a slotted cover arrangement.
Featuring nominal dimensions of 250 mm wide × 600 mm high, the AS214 is specified for a 1PW cover configuration. Its slotted design provides openings intended to accommodate compatible electrical equipment arrangements, distinguishing it from a solid or blank cover. The narrow, tall rectangular format makes it suitable for designated distribution board sections requiring the specified 250 × 600 mm cover size.
Identified by ABB order code 2CPX062836R9999, the AS214 is a practical accessory for new electrical installations, distribution board construction, refurbishment and replacement work. Its combination of a 250 mm width, 600 mm height and 1PW designation supports accurate component selection when assembling or maintaining compatible ABB sub-distribution equipment.
Slotted covers are important mechanical accessories in low-voltage electrical distribution board construction. They incorporate openings intended to accommodate particular equipment configurations, allowing compatible electrical devices to be positioned behind a cover while retaining access to designated operating areas. Correct cover selection helps maintain the intended equipment arrangement and contributes to a consistent, organised panel layout.
The ABB AS214 combines a 250 mm width with a 600 mm height and is designated for a 1PW cover arrangement. Its narrow, tall format makes it relevant to compatible distribution board sections requiring a vertically proportioned slotted cover. Unlike solid covers that provide an uninterrupted surface, the AS214 incorporates openings intended for the corresponding electrical equipment arrangement.
As part of the ABB DESUJ Sub Distribution accessory range, the AS214 supports professional panel-building, switchgear assembly and electrical maintenance. Selecting the correct cover helps ensure that the intended equipment layout is maintained and reduces the risk of fitting a component with unsuitable dimensions or incorrectly positioned openings.
Before installation, verify the 250 × 600 mm dimensions, 1PW configuration, slot geometry, device alignment, mounting positions and required fixing hardware against the applicable ABB technical documentation. The AS214 is a mechanical cover accessory rather than a standalone electrical protective device. Any required ingress protection rating, protection against contact with live parts or compliance with applicable electrical assembly standards must be established for the complete installed system.
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062836R9999 | |
| Product type | Slotted cover | |
| Accessory category | Electrical distribution board cover | |
| Cover design | Slotted | |
| Nominal width | 250 mm | |
| Nominal height | 600 mm | |
| Cover dimensions (W × H) | 250 × 600 mm | |
| Cover configuration | 1PW | |
| Cover format | Rectangular | |
| Primary function | Covering compatible electrical distribution board sections while accommodating the specified slotted equipment arrangement | |
| Intended equipment | Compatible ABB sub-distribution assemblies | |
| Application | Low-voltage electrical distribution systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AS214 Slotted Cover 250w × 600h 1PW |
The ABB AS214 is a slotted cover designed for compatible low-voltage electrical distribution assemblies. It covers designated distribution board sections while providing openings intended for the specified electrical equipment arrangement.
The ABB AS214 has nominal dimensions of 250 mm wide × 600 mm high. It is specified for a 1PW cover configuration within compatible ABB distribution equipment.
The 1PW designation identifies the cover configuration associated with the AS214. It should be matched to the corresponding ABB distribution board arrangement. The designation should not be treated as a separate physical measurement without reference to the manufacturer's technical documentation.
The manufacturer's order code is 2CPX062836R9999, and the product model is AS214. These identifiers can be used when selecting, ordering or replacing the correct ABB distribution board cover.
Before installation, verify the 250 × 600 mm cover dimensions, 1PW configuration, slot alignment with the intended equipment, mounting positions and required fixing hardware. Installation should follow the relevant ABB instructions, including requirements for electrical clearances and protection against contact with live parts.
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AS214 Slotted Cover 250 × 600 mm 1PW provides a dedicated cover for compatible distribution board sections, helping electrical contractors and panel builders achieve organised equipment coverage, appropriately positioned access openings and consistent low-voltage electrical distribution installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.