Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX062823R9999 ABB AG32 Solid Cover 750 x 300 mm 3PW
ABB AG32 is a 750 x 300 mm solid electrical distribution cover with a 3PW configuration, designed for compatible ABB low-voltage distribution boards and switchgear assemblies requiring a continuous cover surface.
£88.94
Why Choose the ABB AG32 Solid Cover 750 × 300 mm 3PW?
The ABB AG32 is a purpose-designed solid cover for electrical distribution boards, intended for use with compatible low-voltage electrical distribution assemblies. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this accessory provides a dedicated covering solution for professional panel builders, electrical contractors and switchgear manufacturers.
Featuring nominal dimensions of 750 mm wide × 300 mm high, the AG32 is specified for a 3PW cover configuration. Its solid design provides a continuous covering surface without designated device operating slots, making it suitable for compatible distribution board sections where a blank cover is required rather than a slotted cover with equipment access openings.
Identified by ABB order code 2CPX062823R9999, the AG32 is a practical accessory for new electrical installations, distribution board assembly, refurbishment and maintenance. Its combination of a 750 mm width, 300 mm height and 3PW designation supports accurate product selection when constructing or maintaining compatible ABB sub-distribution systems.
Key Advantages
- Purpose-designed solid cover for compatible ABB electrical distribution assemblies.
- 750 mm nominal width for the specified distribution board cover arrangement.
- 300 mm nominal height for compatible electrical panel sections.
- 3PW cover configuration for the corresponding ABB distribution system.
- Solid construction provides an uninterrupted covering surface without designated device operating slots.
- Suitable for covering compatible equipment compartments and designated blank panel sections.
- Helps separate covered electrical equipment from surrounding panel areas when correctly installed.
- Supports a neat, consistent and organised electrical distribution board layout.
- Designed for integration with compatible ABB sub-distribution equipment.
- Suitable for professional panel construction, refurbishment and replacement applications.
Key Features
- ABB AG32 solid cover for electrical distribution equipment.
- ABB order code 2CPX062823R9999.
- DESUJ Sub Distribution product group.
- 750 mm nominal cover width.
- 300 mm nominal cover height.
- 750 × 300 mm nominal cover dimensions (W × H).
- 3PW cover configuration.
- Solid, uninterrupted cover design.
- Wide rectangular cover format.
- Designed for compatible ABB low-voltage electrical distribution assemblies.
- Supports structured electrical panel construction and equipment coverage.
- Suitable for replacement applications where the AG32 is the specified cover.
Reliable Solid Covering for Electrical Distribution Systems
Solid covers are important mechanical accessories in low-voltage electrical distribution board construction. They provide a continuous covering surface for compatible equipment sections, helping maintain the intended separation between internal electrical components and surrounding panel areas. Correct cover selection also contributes to a consistent appearance and an organised distribution board layout.
The ABB AG32 combines a 750 mm width with a 300 mm height and is designated for a 3PW cover arrangement. Its wide rectangular format is intended for compatible electrical distribution board sections requiring a solid cover. Unlike slotted covers that incorporate openings for equipment operation, the AG32 provides an uninterrupted covering surface for the specified installation.
As part of the ABB DESUJ Sub Distribution accessory range, the AG32 supports professional panel-building, switchgear assembly and electrical maintenance. Selecting the correct cover helps maintain consistency with the intended distribution board configuration and avoids the fitting difficulties associated with incorrectly sized or unsuitable cover components.
Before installation, verify the 750 × 300 mm dimensions, 3PW configuration, mounting positions, fixing hardware and compatibility with the intended ABB distribution board against the manufacturer's technical documentation. The AG32 is a mechanical cover accessory rather than a standalone electrical protective device. Any required ingress protection rating, protection against contact with live parts or compliance with applicable electrical assembly standards must be established for the complete installed system.
Typical Applications
- Compatible ABB low-voltage electrical distribution boards.
- Electrical distribution assemblies requiring a 3PW solid cover.
- Covering designated blank sections within compatible electrical panels.
- Commercial building electrical distribution installations.
- Industrial switchgear and power distribution panels.
- Modular electrical distribution equipment assembly.
- Professional electrical panel manufacturing and installation.
- Distribution board refurbishment and solid cover replacement.
- OEM electrical enclosure and switchgear construction.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062823R9999 | |
| Product type | Solid cover | |
| Accessory category | Electrical distribution board cover | |
| Cover design | Solid | |
| Nominal width | 750 mm | |
| Nominal height | 300 mm | |
| Cover dimensions (W × H) | 750 × 300 mm | |
| Cover configuration | 3PW | |
| Cover format | Rectangular | |
| Primary function | Covering compatible electrical distribution board sections | |
| Intended equipment | Compatible ABB sub-distribution assemblies | |
| Application | Low-voltage electrical distribution systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AG32 Solid Cover 750w × 300h 3PW |
Frequently Asked Questions
What is the ABB AG32 solid cover used for?
The ABB AG32 is a solid cover designed for compatible low-voltage electrical distribution assemblies. It provides a continuous covering surface for designated sections of electrical distribution boards and switchgear equipment.
What are the dimensions of the ABB AG32 cover?
The ABB AG32 has nominal dimensions of 750 mm wide × 300 mm high. It is specified for a 3PW cover configuration within compatible ABB distribution equipment.
What is the difference between the ABB AG32 solid cover and the ABB AS31 slotted cover?
The ABB AG32 is a solid cover measuring 750 × 300 mm with a 3PW configuration. The ABB AS31 is a slotted cover measuring 750 × 150 mm, also designated 3PW. They differ in both height and cover design, so they should not be treated as interchangeable without confirmation from the relevant ABB technical documentation.
What is the ABB order code for the AG32 solid cover?
The manufacturer's order code is 2CPX062823R9999, and the product model is AG32. These identifiers can be used when selecting, ordering or replacing the correct ABB distribution board cover.
What should be checked before installing the ABB AG32?
Before installation, verify the 750 × 300 mm cover dimensions, 3PW configuration, compatibility with the intended ABB distribution assembly, mounting positions and fixing hardware. Installation should follow the applicable ABB instructions, including any requirements for electrical clearances and protection against contact with live parts.
Trusted by Electrical Panel Builders Worldwide
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AG32 Solid Cover 750 × 300 mm 3PW provides a dedicated solid cover for compatible distribution board sections, helping electrical contractors and panel builders achieve organised equipment coverage, a consistent panel finish and dependable mechanical integration within low-voltage electrical distribution systems.
