Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AS31 is a 750 x 150 mm slotted electrical distribution cover with a 3PW configuration, designed for compatible ABB low-voltage distribution boards and switchgear assemblies requiring designated equipment openings.
£65.78
The ABB AS31 is a purpose-designed slotted cover for electrical distribution boards, intended for use with compatible low-voltage electrical distribution assemblies. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this cover provides a practical solution for professional panel builders, electrical contractors and switchgear manufacturers requiring a dedicated cover with equipment access openings.
Featuring nominal dimensions of 750 mm wide × 150 mm high, the AS31 is specified for a 3PW cover configuration. Its slotted construction distinguishes it from a solid or blank cover, providing openings intended to accommodate compatible electrical equipment arrangements. The wide, shallow format makes it suitable for distribution board sections requiring the specified 750 × 150 mm cover size.
Identified by ABB order code 2CPX062822R9999, the AS31 is a dedicated accessory for compatible ABB sub-distribution equipment. Its combination of a 750 mm width, 150 mm height and 3PW designation supports accurate product selection for new electrical installations, distribution board assembly, maintenance and replacement applications.
Slotted covers are important accessories in low-voltage electrical distribution board construction. They incorporate openings intended to accommodate particular equipment layouts, allowing compatible electrical devices to be positioned behind a cover while retaining access to designated operating areas. Correct cover selection helps ensure that the physical arrangement of the distribution board corresponds with its intended equipment configuration.
The ABB AS31 combines a 750 mm width with a 150 mm height and is designated for a 3PW cover arrangement. This wide, shallow format makes it relevant to compatible distribution board sections requiring a slotted cover of these dimensions. Unlike a solid cover, the AS31 incorporates openings, although the exact slot dimensions, number of openings and supported device layouts should be verified against ABB technical drawings.
As part of the ABB DESUJ Sub Distribution accessory range, the AS31 supports professional switchgear construction, panel assembly and electrical maintenance. Selecting the correct ABB cover helps maintain consistency with the intended distribution board design and reduces the risk of fitting a cover with unsuitable dimensions or opening positions.
Before installation, verify the 750 × 150 mm dimensions, 3PW configuration, slot alignment, mounting positions and required fixing hardware against the applicable ABB documentation. The AS31 is a mechanical cover accessory rather than a standalone electrical protective device. Any required ingress protection rating, protection against contact with live parts or compliance with applicable electrical assembly standards must be established for the complete installed system.
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062822R9999 | |
| Product type | Slotted cover | |
| Accessory category | Electrical distribution board cover | |
| Cover design | Slotted | |
| Nominal width | 750 mm | |
| Nominal height | 150 mm | |
| Cover dimensions (W × H) | 750 × 150 mm | |
| Cover configuration | 3PW | |
| Cover format | Rectangular | |
| Primary function | Covering compatible distribution board sections while accommodating the specified slotted equipment arrangement | |
| Intended equipment | Compatible ABB sub-distribution assemblies | |
| Application | Low-voltage electrical distribution systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AS31 Slotted Cover 750w × 150h 3PW |
The ABB AS31 is a slotted cover designed for compatible low-voltage electrical distribution assemblies. It covers designated distribution board sections while providing openings intended for the specified electrical equipment arrangement.
The ABB AS31 has nominal dimensions of 750 mm wide × 150 mm high. It is specified for a 3PW cover configuration within compatible ABB distribution equipment.
The 3PW designation identifies the cover configuration associated with the AS31. It should be matched to the corresponding ABB distribution board arrangement. The designation should not be treated as an independent physical measurement without reference to the manufacturer's technical documentation.
The manufacturer's order code is 2CPX062822R9999, and the product model is AS31. These identifiers can be used when selecting, ordering or replacing the correct ABB distribution board cover.
Before installation, verify the 750 × 150 mm cover dimensions, 3PW configuration, slot alignment with the intended equipment, mounting positions and required fixing hardware. Installation should follow the relevant ABB instructions, including requirements for electrical clearances and protection against contact with live parts.
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AS31 Slotted Cover 750 × 150 mm 3PW provides a dedicated cover for compatible distribution board sections, helping electrical contractors and panel builders achieve organised equipment coverage, appropriately positioned access openings and consistent low-voltage distribution installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.