Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX062801R9999 ABB AG11 Solid Cover 250 x 150 mm 1PW
ABB AG11 is a 250 x 150 mm solid cover with a 1PW configuration, designed to cover compatible sections of low-voltage electrical distribution boards and switchgear assemblies.
£28.00
Why Choose the ABB AG11 Solid Cover 250 × 150 mm 1PW?
The ABB AG11 is a purpose-designed solid cover for electrical distribution boards, intended for use with compatible low-voltage distribution assemblies. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this cover provides a dedicated solution for electrical panel construction, switchgear assembly and distribution board installations requiring a solid cover section.
Featuring nominal dimensions of 250 mm wide × 150 mm high, the AG11 is specified for a 1PW cover configuration. Its solid design provides an uninterrupted cover surface for compatible distribution board sections, making it suitable for applications where a blank cover is required rather than a cover with device operating apertures.
Identified by ABB order code 2CPX062801R9999, the AG11 is a practical accessory for electrical contractors, panel builders and maintenance engineers working with compatible ABB sub-distribution equipment. Its compact 250 × 150 mm format makes it useful for new installations, enclosure assembly, distribution board refurbishment and replacement applications where the AG11 is the specified cover.
Key Advantages
- Purpose-designed solid cover for compatible electrical distribution assemblies.
- 250 mm nominal width for the specified cover arrangement.
- 150 mm nominal height suitable for compatible compact distribution board sections.
- 1PW configuration for the corresponding ABB cover system.
- Solid cover design without device operating apertures.
- Helps provide physical separation between covered equipment and surrounding panel areas when correctly installed.
- Supports a neat, consistent and organised electrical distribution board layout.
- Suitable for professional panel construction, maintenance and refurbishment.
- Genuine ABB identification supports accurate component selection and replacement.
Key Features
- ABB AG11 solid cover for electrical distribution equipment.
- ABB order code 2CPX062801R9999.
- DESUJ Sub Distribution product group.
- 250 mm nominal cover width.
- 150 mm nominal cover height.
- 250 × 150 mm nominal cover dimensions (W × H).
- 1PW cover configuration.
- Solid, uninterrupted cover format.
- Designed for compatible ABB low-voltage distribution assemblies.
- Suitable for covering compatible equipment compartments or designated blank sections.
- Supports structured electrical panel assembly and component coverage.
- Suitable for replacement applications where the AG11 is specified.
Reliable Solid Covering for Electrical Distribution Systems
Solid covers are important accessories in the construction of low-voltage electrical distribution boards. They provide a continuous covering surface for compatible equipment sections and can help separate internal electrical components from areas accessible during normal use. Correctly selected covers also contribute to the intended appearance, layout and mechanical arrangement of a completed electrical panel.
The ABB AG11 combines a 250 mm width with a 150 mm height and is designated for a 1PW cover arrangement. Its compact rectangular format is intended for compatible distribution board sections requiring a solid cover. Unlike covers designed with openings for operating devices, the AG11 provides a solid cover surface for the specified application.
As part of the ABB DESUJ Sub Distribution accessory range, the AG11 supports professional panel-building, switchgear assembly and electrical maintenance work. It may be selected for new electrical distribution installations or used as a replacement where the existing equipment specification identifies the AG11 cover.
Before installation, the cover dimensions, 1PW configuration, mounting positions, fixing hardware and compatibility with the intended ABB distribution board should be checked against the manufacturer's technical documentation. The AG11 is a cover accessory rather than a standalone electrical protective device. Any required degree of ingress protection or protection against contact with live parts must be established for the complete installed assembly.
Typical Applications
- Compatible ABB low-voltage electrical distribution boards.
- Electrical distribution assemblies requiring a 1PW solid cover.
- Covering designated blank sections within compatible electrical panels.
- Commercial building electrical distribution installations.
- Industrial switchgear and power distribution panels.
- Professional electrical panel manufacturing and assembly.
- Distribution board refurbishment and cover replacement.
- OEM electrical enclosure and switchgear construction.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062801R9999 | |
| Product type | Solid cover | |
| Accessory category | Electrical distribution board cover | |
| Cover design | Solid | |
| Nominal width | 250 mm | |
| Nominal height | 150 mm | |
| Cover dimensions (W × H) | 250 × 150 mm | |
| Cover configuration | 1PW | |
| Cover shape | Rectangular | |
| Primary function | Covering compatible electrical distribution board sections | |
| Intended equipment | Compatible ABB sub-distribution assemblies | |
| Application | Low-voltage electrical distribution systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AG11 Solid Cover 250w × 150h 1PW |
Frequently Asked Questions
What is the ABB AG11 solid cover used for?
The ABB AG11 is a solid cover designed for compatible low-voltage electrical distribution assemblies. It provides a continuous cover surface for designated sections of electrical distribution boards and switchgear equipment.
What are the dimensions of the ABB AG11 cover?
The ABB AG11 has nominal dimensions of 250 mm wide × 150 mm high. It is specified for a 1PW cover configuration within compatible ABB distribution equipment.
What does 1PW mean in the ABB AG11 product designation?
The 1PW designation identifies the cover configuration associated with the AG11. It should be matched to the corresponding ABB distribution board arrangement. The designation should not be treated as a separate physical dimension without reference to the manufacturer's documentation.
What is the ABB order code for the AG11 solid cover?
The manufacturer's order code is 2CPX062801R9999, and the product model is AG11. These identifiers can be used when selecting, ordering or replacing the correct ABB solid cover.
Does the ABB AG11 provide electrical protection on its own?
The AG11 is a solid cover accessory intended for compatible electrical distribution assemblies. It does not independently establish a particular ingress protection rating or level of protection against contact with live parts. These characteristics depend on the complete installation, including the enclosure, mounting arrangement and other fitted components.
Trusted by Electrical Panel Builders Worldwide
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AG11 Solid Cover 250 × 150 mm 1PW provides a dedicated solid cover for compatible distribution board sections, helping electrical contractors and panel builders achieve organised equipment coverage and consistent low-voltage electrical installations.
