Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ED224 (2CPX062789R9999) is a plastic cover extension frame for the ABB AG24 distribution board cover. Measuring 500 × 600 × 50 mm, it supports compatible 25 mm or 35 mm cover-raising arrangements. ABB identifies this model as two-field-wide, although the supplied product description states 3PW. Light grey RAL 7035 finish, IP2XC classification and one piece per standard pack.
£121.27
The ABB ED224 Extension Frame for Cover 3PW is a specialist cover-raising accessory for compatible ABB electrical distribution boards. Designed to provide additional space between the internal mounting arrangement and the front cover, the ED224 supports professional electrical panel construction, refurbishment and maintenance.
Identified by ABB order code 2CPX062789R9999, the ED224 belongs to the DESUJ Sub Distribution product group. Its manufacturer-listed dimensions are 500 mm wide × 600 mm high × 50 mm deep, and ABB identifies it as the extension frame for the AG24 cover.
The supplied product description refers to the ED224 as a 3PW extension frame. However, ABB's technical catalogue identifies this order code as a two-field-wide extension frame. For installations requiring a three-field-wide frame, the corresponding 600 mm-high model is ABB ED234. The ED224 model and order code should therefore take precedence when checking compatibility.
Manufactured from plastic with a light grey RAL 7035 finish, the ABB ED224 is designed for installations using compatible 52.5 mm cover brackets. The system supports cover-raising arrangements of 25 mm or 35 mm when combined with the appropriate supplementary ABB components.
The ABB ED224 Extension Frame is designed for situations where the standard cover position must be adjusted to accommodate a compatible internal equipment arrangement. Raising the cover can be necessary when fitting certain mounting adapters or equipment in vertical modules.
ABB specifies the ED224 for use with the AG24 cover and compatible fields equipped with 52.5 mm cover brackets, including appropriate ED138 arrangements. The extension frame forms part of a defined system of mounting and spacing accessories.
Two cover-raising configurations are identified in ABB's catalogue: 25 mm and 35 mm. Each requires the corresponding supplementary accessory. The correct arrangement must be selected according to the electrical enclosure design and the manufacturer's installation instructions.
Although the supplied product title includes 3PW, ABB's catalogue assigns ED224 / 2CPX062789R9999 to the two-field-wide extension frame range. The verified external width is 500 mm.
The ABB extension frame range also includes the ED234, order code 2CPX062794R9999, which is the corresponding three-field-wide frame measuring 750 mm wide × 600 mm high. These models are not interchangeable simply because they share the same nominal height.
When ordering a replacement or specifying components for a new distribution board, confirm whether the installation requires the ED224 for AG24 or the ED234 for AG34. Checking the ABB model and order code helps prevent incorrect frame selection.
The ED224 is manufactured from plastic and supplied in light grey RAL 7035. This provides a consistent finish alongside compatible ABB distribution board covers and accessories.
The product is listed with an IP2XC protection classification. This designation relates to protection against access to hazardous parts and solid-object ingress under the applicable installation conditions. It does not establish that the frame alone provides a complete protective enclosure.
Correct installation of the extension frame, associated cover, mounting brackets and supplementary accessories is necessary to maintain the intended protection of the completed distribution board. The finished assembly should be assessed against the relevant electrical installation requirements.
ABB offers different extension frame sizes to suit the corresponding distribution board covers:
The ABB ED224 is the correct selection where the specified mounting arrangement requires a 500 mm-wide, 600 mm-high extension frame for the AG24 cover.
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Brand range | ABB Striebel & John | |
| Product group | DESUJ Sub Distribution | |
| Product family | CombiLine interior expansion system | |
| ABB order code | 2CPX062789R9999 | |
| Supplied product description | ED224 Extension Frame for Cover 3PW | |
| ABB catalogue designation | Extension frame for AG24 cover | |
| Product type | Cover extension frame / raising frame | |
| Manufacturer-listed panel width | 2 fields | |
| Compatible cover | ABB AG24 | |
| External width | 500 mm | |
| External height | 600 mm | |
| External depth | 50 mm | |
| External dimensions (W × H × D) | 500 × 600 × 50 mm | |
| Cover-raising options | 25 mm or 35 mm | |
| Compatible cover bracket height | 52.5 mm | |
| Accessory for 25 mm raising | ABB ED135P4 | |
| Accessory for 35 mm raising | ABB ED139P4 | |
| Material | Plastic | |
| Colour | Light grey | |
| RAL colour reference | RAL 7035 | |
| Protection classification | IP2XC | |
| Hinged | No | |
| Transparent | No | |
| Number of device rows | 0; extension frame rather than a device cover | |
| Pack quantity | 1 piece | |
| EAN / GTIN | 4011617627890 | |
| Customs tariff number | 85389099 |
The ABB ED224 is an extension frame used to raise the position of a compatible electrical distribution board cover, specifically the ABB AG24 cover.
The ABB ED224 measures 500 mm wide, 600 mm high and 50 mm deep.
The supplied product title describes the ED224 as 3PW, but ABB's catalogue identifies ED224 / 2CPX062789R9999 as a two-field-wide frame. The corresponding three-field-wide, 600 mm-high model is ABB ED234.
The ABB ED224 is designed for the ABB AG24 cover in the specified mounting arrangement.
The ABB ED224 supports 25 mm or 35 mm cover-raising arrangements when installed with the corresponding supplementary ABB accessories.
ABB specifies ED135P4 for a 25 mm raising arrangement and ED139P4 for a 35 mm raising arrangement. The complete installation requirements should be checked against ABB's assembly instructions.
The ABB ED224 is manufactured from plastic and finished in light grey RAL 7035.
The ABB ED224 has a listed IP2XC protection classification. Protection of the complete distribution board depends on correct installation of the frame and associated enclosure components.
The ABB ED224 is supplied as one extension frame per standard packaging unit.
The ABB ED224 measures 500 × 600 mm and is intended for the AG24 cover. The ABB ED234 measures 750 × 600 mm and is intended for the AG34 cover.
No. The ABB ED224 is designed for compatible ABB cover and mounting arrangements. The enclosure, cover brackets, required raising height and supplementary components must be verified before installation.
The manufacturer's order code is 2CPX062789R9999, corresponding to the ABB ED224 Extension Frame for the AG24 cover.
The ABB ED224 Extension Frame provides a manufacturer-designated solution for raising compatible electrical distribution board covers. With its 500 × 600 × 50 mm dimensions, AG24 cover compatibility and support for specified 25 mm or 35 mm raising arrangements, it is a practical accessory for electrical contractors, switchboard manufacturers and maintenance engineers working with ABB sub-distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.