Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX062648R9999 ABB ZK302P20 10-95 mm² Attachment Clamp Pack of 20
ABB ZK302P20 attachment clamp designated for 10–95 mm² conductor connections in compatible electrical sub-distribution assemblies, supplied in a pack of 20 pieces.
£434.24
Why Choose the ABB ZK302P20 10–95 mm² Attachment Clamp?
The ABB ZK302P20 (order code 2CPX062648R9999) is an attachment clamp designated for a 10–95 mm² conductor cross-section range in compatible electrical sub-distribution assemblies. Part of ABB's DESUJ Sub Distribution product group, this accessory is intended for electrical connection arrangements requiring the specified clamp size.
Attachment clamps are used in suitable electrical distribution assemblies to secure conductors at compatible connection points. The ZK302P20 provides a manufacturer-identified component for installations requiring the designated 10–95 mm² range, helping panel builders select the correct accessory for their intended distribution equipment.
Supplied in a pack of 20 pieces, the ABB ZK302P20 is suitable for switchboard manufacturing, electrical distribution installation and compatible replacement work. Its distinct model designation and order code support accurate identification when ordering fastening and connection accessories.
Key Advantages
- Dedicated ABB attachment clamp for compatible sub-distribution assemblies.
- Specified for a 10–95 mm² conductor cross-section range.
- Pack of 20 pieces for multiple installation requirements.
- Supports conductor attachment in appropriately designed electrical connection arrangements.
- Suitable for new electrical panel construction and compatible replacement applications.
- Manufacturer-specific identification simplifies accurate component selection.
- Part of ABB's electrical sub-distribution accessory range.
Key Features
- ABB ZK302P20 attachment clamp.
- Nominal conductor cross-section range: 10–95 mm².
- Pack quantity: 20 pieces.
- Electrical connection accessory for compatible distribution assemblies.
- Designed for use with suitable conductor attachment arrangements.
- Suitable for professional electrical panel assembly and maintenance.
- Manufacturer order code 2CPX062648R9999.
- Included in the ABB DESUJ Sub Distribution product group.
Conductor Attachment for Electrical Distribution Assemblies
The ABB ZK302P20 attachment clamp is intended for suitable electrical connection arrangements where the specified conductor cross-section range is required. Correct clamp selection is important for achieving the intended conductor attachment and maintaining the integrity of the connection assembly.
Before installation, the conductor material, conductor construction, connection interface and required tightening method should be checked against the applicable ABB equipment instructions. The stated 10–95 mm² range identifies the clamp's designated size range but does not independently establish compatibility with every conductor type or electrical distribution component.
Typical Applications
- ABB electrical sub-distribution assemblies.
- Compatible conductor attachment arrangements.
- Low-voltage electrical distribution board construction.
- Switchboard manufacturing and panel building.
- Electrical connection assembly and servicing.
- Replacement of matching ZK302 attachment clamps.
- Commercial and industrial electrical distribution installations.
- Distribution equipment refurbishment and maintenance.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Busbar / Terminal | |
|---|---|---|
| Product Series | S&J CombiLine | |
| ABB order code | 2CPX062648R9999 | |
| Product designation | ZK302P20 10-95mm Attachment Clamp 20Pcs | |
| Product type | Attachment clamp | |
| Designated conductor cross-section range | 10–95 mm² | |
| Pack quantity | 20 pieces | |
| Product category | Electrical Distribution Connection Accessories | |
| Application | Compatible electrical sub-distribution connection assemblies | |
| ABB product group | DESUJ Sub Distribution |
Frequently Asked Questions
What is the ABB ZK302P20 used for?
The ABB ZK302P20 is an attachment clamp intended for compatible electrical sub-distribution connection assemblies requiring a 10–95 mm² conductor cross-section range.
What conductor size range is specified for the ZK302P20?
The designated conductor cross-section range is 10–95 mm².
How many attachment clamps are supplied in one pack?
The ABB ZK302P20 is supplied in a pack of 20 pieces.
What is the difference between the ABB ZK302P20 and ZK304P20?
The ZK302P20 is designated for 10–95 mm² conductors, while the ZK304P20 is designated for 35–240 mm² conductors. Both are supplied in packs of 20 pieces.
Can the ZK302P20 be used with any conductor between 10 and 95 mm²?
Not necessarily. The conductor material, construction and connection arrangement must also be compatible with the clamp and the relevant ABB equipment instructions.
Can the ABB ZK302P20 be used as a replacement clamp?
Yes. It can replace a matching ZK302P20 clamp where the original assembly specifies this component and the installation requirements are satisfied.
Does the ZK302P20 have a specified current rating?
A current rating is not established by the product designation alone. The permissible current depends on the approved connection arrangement and the applicable ABB technical documentation.
What is the ABB order code for the ZK302P20?
The manufacturer's order code is 2CPX062648R9999.
Trusted by Electrical Contractors and Switchboard Manufacturers
The ABB ZK302P20 attachment clamp provides a manufacturer-identified connection accessory for compatible electrical sub-distribution assemblies. Its 10–95 mm² designation and 20-piece pack make it a practical component for professional panel construction, electrical installation and matching replacement work.
