Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX062632R9999 ABB ZK81P5 4–35 mm² Copper Busbar Connecting Terminal Pack of 5
ABB ZK81P5 is a single-pole snap-on connecting terminal with a retaining spring for 5 mm thick copper busbars and 4–35 mm² conductors, supplied in a pack of five pieces.
£19.31
Why Choose the ABB ZK81P5 4–35 mm² Connecting Terminal 5-Piece Pack?
The ABB ZK81P5 is an electrical connecting terminal for 4–35 mm² conductors, designed for conductor connection applications within compatible low-voltage distribution boards, switchgear assemblies and electrical enclosures. Part of ABB's DESUJ Sub Distribution product group, this accessory provides a practical connection solution for electrical installers, panel builders and switchgear manufacturers.
With a specified conductor cross-section range of 4–35 mm², the ZK81P5 accommodates suitable electrical conductors across a range of distribution wiring applications. It is intended for compatible ABB electrical distribution mounting and connection arrangements where an appropriately rated terminal is required for the conductor size and installation design.
Supplied in a convenient pack of 5 pieces, the ABB ZK81P5 supports electrical distribution board construction, equipment installation and maintenance projects. Identified by ABB order code 2CPX062632R9999, this connecting terminal is a clearly specified accessory for professional electrical distribution assemblies.
Key Advantages
- 4–35 mm² connecting terminal for compatible electrical distribution applications.
- Accommodates a useful range of conductor cross-sections.
- Provides a dedicated electrical connection point within suitable distribution assemblies.
- Designed for integration with compatible ABB sub-distribution equipment.
- Supports organised conductor routing and connection arrangements.
- Suitable for professional electrical panel construction and switchgear assembly.
- Useful for new installations, refurbishment and maintenance projects.
- Clearly identified by its ABB model and manufacturer order code.
- Part of ABB's DESUJ Sub Distribution accessories range.
- Pack of 5 connecting terminals provides a practical quantity for installation work.
Key Features
- ABB ZK81P5 electrical connecting terminal.
- 4 mm² minimum conductor cross-section.
- 35 mm² maximum conductor cross-section.
- 4–35 mm² specified conductor connection range.
- Designed for compatible low-voltage electrical distribution assemblies.
- Provides a dedicated connection component for suitable electrical conductors.
- Supports structured internal distribution board wiring.
- Suitable for professional panel-building applications.
- Applicable to compatible ABB sub-distribution connection systems.
- ABB order code 2CPX062632R9999 for accurate identification.
- 5 individual connecting terminals per pack.
Reliable Conductor Connections for Electrical Distribution Systems
Electrical connecting terminals provide designated connection points within distribution boards and switchgear assemblies. The ABB ZK81P5 is specified for conductors with cross-sections from 4–35 mm², making it a useful component for compatible distribution wiring arrangements requiring connections within this size range.
Correct terminal selection depends on more than conductor size alone. Installers should verify the supported conductor material and construction, applicable electrical ratings, connection method, mounting compatibility and tightening requirements using ABB's installation documentation. The completed assembly must maintain the necessary electrical clearances and comply with relevant electrical installation standards.
Typical Applications
- Low-voltage electrical distribution boards.
- Compatible ABB sub-distribution connection assemblies.
- Electrical conductors with cross-sections from 4–35 mm².
- Commercial and industrial electrical panel construction.
- Switchgear cabinet conductor connection arrangements.
- Internal electrical distribution wiring assemblies.
- Electrical enclosure installation and refurbishment.
- Maintenance and replacement of compatible connecting terminals.
- Professional electrical panel-building workshops.
- Electrical distribution projects requiring multiple conductor connection points.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine | |
|---|---|---|
| Device Type | Busbar / Terminal | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062632R9999 | |
| Product type | Electrical connecting terminal | |
| Accessory classification | Conductor connection accessory | |
| Minimum conductor cross-section | 4 mm² | |
| Maximum conductor cross-section | 35 mm² | |
| Specified conductor connection range | 4–35 mm² | |
| Primary function | Connection of compatible electrical conductors | |
| Associated equipment | Compatible ABB sub-distribution assemblies | |
| Installation application | Low-voltage electrical distribution systems | |
| Quantity per pack | 5 pieces |
Frequently Asked Questions
What is the ABB ZK81P5 used for?
The ABB ZK81P5 is an electrical connecting terminal intended for suitable conductor connections within compatible low-voltage electrical distribution assemblies.
What conductor sizes does the ABB ZK81P5 support?
The ZK81P5 has a specified conductor cross-section range of 4–35 mm². The suitability of individual conductor materials and types should be checked against ABB's installation instructions.
How many connecting terminals are included in one pack?
The ABB ZK81P5 is supplied as a pack of 5 individual connecting terminals.
Can the ABB ZK81P5 be used in electrical distribution boards?
Yes. The ZK81P5 belongs to ABB's DESUJ Sub Distribution product group and is intended for use within compatible electrical distribution connection assemblies.
What is the ABB order code for the ZK81P5?
The manufacturer's order code is 2CPX062632R9999, identifying the ABB ZK81P5 4–35 mm² connecting terminal supplied in a pack of 5 pieces.
Trusted by Electrical Panel Builders and Installers
ABB distribution system accessories support professional low-voltage electrical panel construction and organised conductor connection arrangements. The ZK81P5 provides a specified 4–35 mm² conductor connection range in a convenient 5-piece pack, making it a practical choice for compatible electrical distribution board and switchgear installations.
