Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX062555R9999 ABB ZX22P30 DIN Rail 2PW 30 Pieces –
ABB ZX22P30 (2CPX062555R9999) is a pack of 30 two-panel-wide DIN rails with a 35 × 7.5 mm top-hat profile, 490 mm manufacturer-listed external width and Sendzimir-galvanised finish for compatible electrical distribution mounting frames.
£120.65
Why Choose the ABB ZX22P30 DIN Rail 2PW?
The ABB ZX22P30 DIN Rail 2PW is a professional 35 × 7.5 mm top-hat mounting rail designed for two-panel-wide electrical distribution assemblies. Identified by ABB order code 2CPX062555R9999, this accessory belongs to the ABB DESUJ Sub Distribution product group and is supplied as a pack of 30 DIN rails.
Designed for installation onto compatible electrical distribution mounting frames, the ZX22P30 provides a standardised mounting interface for suitable DIN rail-mounted electrical components. Its 2PW (two-panel-wide) configuration makes it appropriate for wider distribution board layouts where the corresponding ABB mounting arrangement specifies a two-field rail.
The rail features a 35 mm top-hat profile with a 7.5 mm profile depth and a manufacturer-listed external width of approximately 490 mm. It has a 1 mm material thickness and a Sendzimir-galvanised surface finish. Supplied in a convenient 30-piece pack, the ABB ZX22P30 supports efficient procurement for electrical contractors, switchboard manufacturers and panel builders completing multiple distribution board installations.
Key Advantages
- 35 × 7.5 mm DIN rail profile provides a standard mounting interface for compatible electrical devices.
- Two-panel-wide (2PW) configuration supports wider electrical distribution board layouts.
- Pack of 30 DIN rails is suitable for larger electrical installation and panel-building projects.
- Designed for direct installation onto compatible ABB mounting frames.
- Sendzimir-galvanised surface finish provides protective zinc coating.
- 1 mm material thickness supports the intended mechanical mounting arrangement.
- Helps organise modular electrical components within compatible distribution assemblies.
- Suitable for new installations, electrical panel modifications and replacement projects.
- Provides a consistent rail format for repeated switchboard construction.
- Part of the ABB DESUJ Sub Distribution accessory range.
Key Features
- ABB ZX22P30 DIN Rail 2PW.
- ABB order code 2CPX062555R9999.
- DESUJ Sub Distribution product group.
- ABB Striebel & John electrical distribution accessory.
- 30 DIN rails per pack.
- 35 mm top-hat rail profile width.
- 7.5 mm DIN rail profile depth.
- Two-panel-wide mounting configuration.
- Approximately 490 mm manufacturer-listed external width.
- 1 mm material thickness.
- Sendzimir-galvanised surface finish.
- Designed for assembly onto compatible electrical distribution mounting frames.
- Suitable for compatible DIN rail-mounted electrical devices.
- Intended for professional electrical distribution board assembly.
- Bulk packaging supports repeated installation across multiple panels.
Two-Panel-Wide DIN Rail Mounting for Electrical Distribution Boards
DIN rails provide a standardised mounting interface for modular electrical equipment within distribution boards and control cabinets. The ABB ZX22P30 uses the widely recognised 35 × 7.5 mm top-hat profile, enabling compatible electrical devices to be mounted onto the rail as part of a properly designed enclosure assembly.
The 2PW configuration identifies the rail as suitable for a two-panel-wide mounting arrangement. Unlike DIN rails intended to fit between mounting-frame members, the ZX22P30 is designed for installation onto the mounting frame. This distinction is important when selecting the correct rail for an ABB distribution board or replacing an existing mounting component.
The Sendzimir-galvanised finish provides a protective surface treatment, while the 1 mm material thickness forms part of the rail's specified construction. Before installation, verify the mounting frame, fixing positions, supported equipment and applicable mechanical loading requirements against ABB's technical documentation.
Efficient Procurement for Multiple Distribution Board Installations
Electrical contractors and switchboard manufacturers frequently require multiple matching DIN rails for repeatable panel layouts. The ABB ZX22P30 pack of 30 provides a practical purchasing format for larger projects, reducing the need to order individual mounting rails for each assembly.
Using the specified ABB mounting accessory helps maintain consistency between distribution boards and simplifies replacement planning. The ZX22P30 is particularly relevant where an existing design calls for the corresponding two-panel-wide, 35 × 7.5 mm mounting rail.
When comparing alternatives, confirm both the DIN rail profile and the installation arrangement. Rails with the same nominal top-hat profile may differ in overall length, fixing positions or compatibility with a particular mounting frame.
Typical Applications
- Two-panel-wide ABB electrical distribution board assemblies.
- Compatible ABB mounting-frame installations.
- Low-voltage sub-distribution boards.
- Modular electrical device mounting.
- Electrical control cabinet construction.
- Commercial electrical distribution equipment.
- Industrial electrical enclosure assemblies.
- Switchboard and electrical panel manufacturing.
- Installation of compatible DIN rail-mounted components.
- Replacement of matching ABB two-panel-wide DIN rails.
- Electrical distribution board refurbishment and modification.
- Multi-panel installation projects requiring bulk DIN rail supplies.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Mounting / Expansion Module | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Brand range | ABB Striebel & John | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062555R9999 | |
| Product type | DIN rail / top-hat mounting rail | |
| Accessory category | Electrical distribution board mounting accessories | |
| Rail profile | 35 × 7.5 mm | |
| Profile width | 35 mm | |
| Profile depth | 7.5 mm | |
| Panel width | 2PW (two-panel-wide) | |
| Manufacturer-listed external width | 490 mm | |
| Material thickness | 1 mm | |
| Surface finish | Sendzimir-galvanised | |
| Mounting arrangement | Onto compatible electrical distribution mounting frames | |
| Pack quantity | 30 pieces | |
| Packaging unit | 1 pack of 30 DIN rails | |
| Package dimensions | 570 × 145 × 60 mm | |
| Package gross weight | 5.366 kg | |
| Country of origin | Germany | |
| EAN / GTIN | 4011617625551 | |
| Customs tariff number | 73269098 | |
| Application | Mounting compatible DIN rail devices within two-panel-wide electrical distribution assemblies |
Frequently Asked Questions
What is the ABB ZX22P30 used for?
The ABB ZX22P30 is a two-panel-wide DIN rail designed to provide a mounting interface for compatible electrical devices within ABB electrical distribution assemblies.
How many DIN rails are included in the ABB ZX22P30 pack?
The ABB ZX22P30 is supplied as a pack of 30 DIN rails, making it suitable for electrical panel-building and larger installation projects.
What does 2PW mean for the ABB ZX22P30?
2PW means two-panel-wide. It identifies the ZX22P30 as a DIN rail intended for a compatible two-panel-wide electrical distribution mounting arrangement.
What DIN rail profile does the ABB ZX22P30 use?
The ABB ZX22P30 uses a 35 × 7.5 mm top-hat DIN rail profile, suitable for compatible DIN rail-mounted electrical components.
What are the dimensions of the ABB ZX22P30?
The ABB ZX22P30 has a 35 mm profile width, a 7.5 mm profile depth and a manufacturer-listed external width of 490 mm. Its material thickness is 1 mm.
What surface finish does the ABB ZX22P30 have?
The ABB ZX22P30 has a Sendzimir-galvanised surface finish, providing a protective zinc coating.
How is the ABB ZX22P30 installed?
The ABB ZX22P30 is designed for installation onto a compatible electrical distribution mounting frame. The correct fixing arrangement and installation requirements should be checked against ABB's technical documentation.
Is the ABB ZX22P30 compatible with every DIN rail mounting frame?
No. Although the ZX22P30 uses a standard 35 × 7.5 mm top-hat profile, mounting-frame compatibility, rail dimensions and fixing positions must be verified before installation.
What is the difference between the ABB ZX21P30 and ZX22P30?
The ZX21P30 is a one-panel-wide DIN rail, while the ZX22P30 is a two-panel-wide DIN rail. Both use a 35 × 7.5 mm top-hat profile and are supplied in packs of 30.
What is the ABB order code for the ZX22P30?
The manufacturer's order code is 2CPX062555R9999, corresponding to the ABB ZX22P30 DIN Rail 2PW supplied as a pack of 30 pieces.
Trusted ABB DIN Rail Mounting Accessories
ABB Striebel & John electrical distribution accessories support professional switchboard construction and organised enclosure assembly. The ABB ZX22P30 DIN Rail 2PW combines a 35 × 7.5 mm top-hat profile, a two-panel-wide mounting configuration and convenient 30-piece packaging, providing a practical solution for electrical contractors, panel builders and maintenance engineers working with compatible ABB distribution systems.
