Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZW349P10 (2CPX062485R9999) is a pack of 10 mounting angles designed for 185 mm busbar modules using ABB ZX522 busbar holders and compatible WR mounting frames, with individual bracket dimensions of 103 × 53 × 37 mm.
£115.76
The ABB ZW349P10 Mounting Angle (ABB order code 2CPX062485R9999) is a purpose-designed mounting accessory for ABB STRIEBEL & JOHN electrical distribution systems. Supplied as a pack of 10 mounting brackets, it provides a practical mounting solution for busbar modules with a 185 mm busbar centre spacing, used in conjunction with the ABB ZX522 busbar holder and compatible WR mounting frames.
Part of ABB's CombiLine interior expansion system, the ZW349P10 is designed to support the installation of busbar equipment within modular electrical distribution assemblies. Its angled mounting profile provides a defined mechanical interface between compatible busbar support components and the WR mounting frame, helping installers achieve consistent positioning during panel assembly.
Each mounting angle has nominal external dimensions of 103 × 53 × 37 mm (width × height × depth). The ZW349P10 is supplied in a convenient 10-piece pack, making it particularly suitable for electrical panel builders, switchboard manufacturers and contractors working on multiple busbar mounting positions. It is a mechanical mounting component rather than a current-carrying busbar or electrical switching device.
The ABB ZW349P10 is intended to provide a defined mechanical mounting arrangement for busbar modules within compatible ABB distribution systems. Its principal application is the installation of the ZX522 busbar holder on an ABB WR mounting frame where the busbar module uses a 185 mm centre-to-centre spacing.
Busbar support arrangements are an important part of electrical distribution panel construction. Correct positioning helps maintain the intended geometry of the busbar assembly and supports installation in accordance with the manufacturer's system design. The ZW349P10 forms part of this mechanical mounting arrangement and should be installed using the specified compatible components.
The angled bracket profile provides a compact mounting interface within the enclosure. With nominal dimensions of 103 × 53 × 37 mm, the component is designed for use in the modular interior expansion system rather than as a general-purpose external fixing bracket.
ABB identifies the ZW349P10 for use with the WR mounting frame and the ZX522 busbar holder. Its compatibility with the 185 mm busbar module arrangement makes it relevant to panel builders assembling or maintaining supported busbar distribution equipment.
The product is supplied as a 10-piece pack. This packaging format is useful when multiple mounting positions must be equipped during switchboard construction or when a consistent supply of matching brackets is required across a panel-building project.
For installations requiring only a single mounting angle, ABB also lists the related ZW349 under order code 2CPX067951R9999. The ZW349P10 is the corresponding pack-of-ten variant, allowing the appropriate supply quantity to be selected for the project.
The mounting angle itself does not provide electrical insulation, overcurrent protection, switching or conductor termination. The complete busbar assembly must use the correct busbar holders, mounting frames, insulating components and protective arrangements specified by ABB for the installation.
During assembly, installers should follow the manufacturer's mounting instructions for the ZW348/ZW349/ZX376 accessory family and verify that the selected busbar holder, WR frame and associated distribution components are compatible. Correct mechanical installation is essential for maintaining the intended configuration of the finished electrical distribution assembly.
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine N | |
|---|---|---|
| Device Type | Mounting / Expansion Module |
The ABB ZW349P10 is a mounting angle for 185 mm busbar modules, designed for use with the ABB ZX522 busbar holder and compatible WR mounting frames in electrical distribution assemblies.
The ABB manufacturer order code is 2CPX062485R9999, and the product designation is ZW349P10.
The ABB ZW349P10 is supplied as a pack of 10 mounting angles, making it suitable for panel-building projects requiring multiple identical mounting components.
The ZW349P10 is designed for use with the ABB ZX522 busbar holder in compatible busbar distribution assemblies.
The mounting angle is designed for busbar modules with a 185 mm centre-to-centre spacing.
ABB specifies the ZW349P10 for use with the WR mounting frame as part of its modular electrical distribution system.
Each mounting angle has nominal external dimensions of 103 mm wide × 53 mm high × 37 mm deep.
Yes. The ZW349P10 belongs to the ABB STRIEBEL & JOHN interior expansion system used in compatible CombiLine electrical distribution assemblies.
The ZW349 is supplied as a single mounting angle under order code 2CPX067951R9999, while the ZW349P10 is the corresponding pack-of-ten variant under order code 2CPX062485R9999.
ABB's distribution catalogue associates the ZW349P10 with ML21B–ML33B busbar equipment and 185 mm busbar module installations using compatible WR mounting frames.
No. The ZW349P10 is a mechanical mounting accessory intended to support compatible busbar holder installations; it is not a current-carrying busbar or electrical switching device.
No. The ZW349P10 is designed for specified ABB busbar holder and WR mounting frame combinations. Compatibility should be checked before use with other equipment.
The manufacturer's product information lists a packaging gross weight of 1.385 kg for the 10-piece pack.
The manufacturer's product information identifies the Czech Republic as the country of origin for the ZW349P10.
The ZW349P10 is supplied as a pack of 10 mounting angles. The ZX522 busbar holder is a separate compatible component and should be selected independently for the required installation.
The ZW349P10 is suitable for electrical panel builders, switchboard manufacturers, electrical contractors and maintenance engineers working with compatible ABB 185 mm busbar distribution systems.
ABB STRIEBEL & JOHN mounting accessories provide system-specific mechanical solutions for professional electrical distribution panel assembly. With its compatibility with 185 mm busbar modules, ABB ZX522 busbar holders and WR mounting frames, the ZW349P10 offers a practical 10-piece mounting angle pack for switchboard manufacturers, electrical contractors and industrial panel builders.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.