Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZW248 1 PW horizontal profile No. 10 cable clamp rail made from galvanised sheet steel with a 35 x 19 mm profile and 186 mm length for installation between compatible mounting frames.
£14.97
The ABB ZW248 is a 1-panel-width horizontal cable clamp profile rail designed for installation between compatible ABB mounting frames. Supplied under ABB order code 2CPX060199R9999, it forms part of the ABB DESUJ Sub Distribution product group and provides a robust mounting point for cable-retention components within professional low-voltage distribution assemblies.
The ZW248 uses profile No. 10, with a nominal profile size of 35 × 19 mm and a 6.2 mm mounting hole. Its 1 PW field width corresponds to a rail length of 186 mm, making it suitable for horizontal installation between mounting-frame sections where a compact cable-support rail is required.
Manufactured from galvanised sheet steel, the ZW248 provides a durable foundation for compatible ABB bolt clamps and saddle clamps. Its coordinated profile allows cables to be mechanically retained and organised within ABB distribution assemblies, helping support structured routing and effective strain relief.
Cable clamp rails provide a dedicated mechanical mounting point for securing incoming and outgoing conductors inside electrical distribution assemblies. The ABB ZW248 uses the established profile No. 10 format and is intended for horizontal installation between mounting frames, creating a stable rail onto which compatible cable-retention hardware can be fitted.
With its 35 × 19 mm galvanised steel profile and 186 mm one-panel-width length, the ZW248 can be combined with suitable ABB bolt clamps and saddle clamps to organise and secure cables. This arrangement helps provide strain relief and reduces the transfer of mechanical cable loads to terminals and other electrical connections.
Tick the specs you need, then view products that match.
| Device Type | Mounting / Expansion Module | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| Order code | 2CPX060199R9999 | |
| EAN | 4011617601999 | |
| Product type | Horizontal cable clamp profile rail | |
| Rail type | Wide rail 2 | |
| Profile | No. 10 | |
| Profile dimensions | 35 × 19 mm | |
| Field width | 1 PW | |
| Rail length | 186 mm | |
| Nominal width | 186 mm | |
| Nominal height | 35 mm | |
| Nominal depth | 18 mm | |
| Mounting hole | 6.2 mm | |
| Material | Sheet steel | |
| Surface finish | Galvanised | |
| Installation position | Between compatible mounting frames | |
| 19-inch mounting | No | |
| Packaging quantity | 1 | |
| Gross weight | 0.239 kg | |
| Country of origin | Germany |
The ABB ZW248 is a horizontal profile No. 10 cable clamp rail designed for installation between compatible mounting frames, providing a mounting point for cable-retention components within low-voltage distribution assemblies.
The ZW248 is a 1 PW rail with a length of 186 mm.
The ZW248 uses profile No. 10, measuring approximately 35 × 19 mm with a 6.2 mm mounting hole.
The ZW248 is manufactured from galvanised sheet steel, providing a robust mounting rail for compatible cable-retention hardware.
The ABB order code for the ZW248 WR horizontal profile rail 1PW is 2CPX060199R9999.
ABB mounting-frame and cable-management accessories provide professional panel builders and electrical system integrators with coordinated components for organised cable routing, secure strain relief and dependable low-voltage distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.