Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB MT242B 2CPX041306R9999 is a 2-panel-width CombiLine NH1 fuse switch-disconnector expansion module equipped with two NH1 fuse switch-disconnectors and a 3-pole busbar system with a maximum rated current of 440 A.
£698.69
The ABB MT242B, order code 2CPX041306R9999, is a populated NH1 fuse switch-disconnector expansion module designed for ABB CombiLine low-voltage sub-distribution systems. Supplied mounted for cabinet installation, it combines two ABB NH1 fuse switch-disconnectors with a 3-pole busbar system to provide compact fused isolation and power distribution within professional electrical assemblies.
Designed for industrial and commercial distribution applications, the MT242B is equipped with two NH1 fuse switch-disconnectors and has a maximum module rated current of 440 A. The CombiLine series design incorporates a 3-pole busbar system with M10 connection screws and separator shutters, providing a practical solution for integrating multiple high-current fused outgoing circuits into compatible ABB distribution cabinets.
The MT242B occupies 2 panel widths (PW/FB) and 3 grid units (RE), corresponding to dimensions of 450 mm high × 500 mm wide × 200 mm deep and 72 space units (PLE). It can be used from a cabinet depth of 200 mm and is compatible with both EDF and WR mounting frames, which must be ordered separately.
NH fuse switch-disconnectors combine fuse protection with circuit isolation, allowing outgoing circuits to be protected against overcurrent while providing a means of safely disconnecting equipment for operation or maintenance. The ABB MT242B integrates two NH1 fuse switch-disconnectors into a modular CombiLine assembly, simplifying the construction of multiple fused outgoing circuits within a distribution cabinet.
The MT242B incorporates a 3-pole busbar arrangement and supports a maximum module rated current of 440 A. Its 2-panel-width construction, 72 space units and compatibility with EDF and WR mounting frames make it suitable for modular sub-distribution assemblies where compact, organised fused switching and isolation are required.
Tick the specs you need, then view products that match.
| Current | 440 A | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Device Type | Mounting / Expansion Module | |
| Series | CombiLine | |
| Order code | 2CPX041306R9999 | |
| Product group | DESUJ Sub Distribution | |
| Product type | NH1 fuse switch-disconnector expansion module | |
| Fuse switch-disconnector size | NH1 | |
| Number of fuse switch-disconnectors | 2 | |
| Maximum module rated current | 440 A | |
| Number of poles | 3 | |
| Busbar system | 3-pole | |
| Connection screws | M10 | |
| Nominal width | 2 PW / FB | |
| Width | 500 mm | |
| Nominal height | 3 RE | |
| Height | 450 mm | |
| Depth | 200 mm | |
| Space units | 72 PLE | |
| Minimum cabinet depth | 200 mm | |
| Equipment-to-cover spacing | 43 mm | |
| Cover | Included | |
| Cover material | Plastic | |
| Cover design | With cut-out | |
| Cover fastener | 90-degree push-turn fastener | |
| Colour | Light grey, RAL 7035 | |
| Mounting frame | EDF or WR mounting frame, ordered separately | |
| Installation | Mounted and installed in cabinet | |
| Fire protection housing suitability | Not suitable | |
| EAN | 4011617413066 | |
| Country of origin | Germany |
The ABB MT242B is an NH1 fuse switch-disconnector expansion module used within compatible ABB CombiLine low-voltage distribution assemblies to provide fused circuit protection, load isolation and connection to a 3-pole busbar system.
The MT242B is supplied populated with two NH1 fuse switch-disconnectors, together with separator shutters and a 3-pole busbar system.
The MT242B has a maximum module rated current of 440 A.
The MT242B occupies 2 panel widths and 3 grid units, with dimensions of 450 mm high × 500 mm wide × 200 mm deep and a capacity of 72 space units.
The MT242B can be installed using compatible EDF or WR mounting frames. The required mounting frame must be ordered separately.
ABB CombiLine interior modules provide a modular approach to professional low-voltage distribution assemblies, with the MT242B combining two NH1 fuse switch-disconnectors, a 3-pole busbar system and a practical 2-panel-width format for reliable fused power distribution.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.