Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX010105R9999 ABB TL104S TwinLine IP55 Wall-Mounting Enclosure 300 x 650 x 275 mm
ABB TL104S TwinLine wall-mounting enclosure, a class II double-insulated IP55 sheet-steel cabinet measuring 300 x 650 x 275 mm for indoor sub-distribution installations.
£343.58
Why Choose the ABB TL104S TwinLine Wall-Mounting Enclosure?
The ABB TL104S is a robust TwinLine wall-mounting electrical enclosure designed for sub-distribution and low-voltage electrical installations. As part of the ABB TwinLine enclosure system, it provides a durable, flexible housing for distribution equipment, metering components, CombiLine modules and mounting assemblies in indoor applications.
This enclosure combines a powder-coated sheet-steel construction with protection class II double insulation and an IP55 degree of protection. Its single-leaf door can be hinged on either the right or left and opens through approximately 180°, helping simplify installation, wiring and maintenance access.
With external dimensions of 650 mm high × 300 mm wide × 275 mm deep, the TL104S provides 48 space units within a compact one-panel-width format. It is pre-assembled for installation of metering and distribution fields, combination sets, CombiLine modules or mounting plates on EDF or WR mounting frames.
Key Advantages
- Durable ABB TwinLine wall-mounting enclosure for sub-distribution applications.
- IP55 protection rating helps protect internal equipment against dust and water ingress.
- Protection class II double-insulated construction for enhanced electrical safety.
- Compact 300 mm × 650 mm × 275 mm enclosure format.
- 48 space units with one-panel-width internal arrangement.
- Flexible installation support for CombiLine modules, meter fields, distribution fields and mounting plates.
Key Features
- ABB TwinLine series.
- IP55 wall-mounting enclosure with door.
- 650 mm height × 300 mm width × 275 mm depth.
- Protection class II, double insulated.
- IK08 impact resistance.
- Powder-coated RAL 7035 light-grey finish.
- Sheet-steel enclosure, door and rear wall.
- Single-leaf door with approximately 180° opening angle.
- Door hinge configurable for right- or left-hand opening.
- Standard double-bit locking mechanism.
- Pre-arranged cable-entry flange openings at the top, bottom and sides.
Flexible Enclosure for Sub-Distribution Systems
The ABB TwinLine system is designed to support modular low-voltage distribution arrangements in commercial, industrial and infrastructure installations. The TL104S provides a structured enclosure platform for organising protective devices, metering equipment and distribution components while maintaining reliable mechanical and environmental protection.
Its internal mounting arrangement supports EDF and WR mounting frames and can accommodate meter fields, distribution fields, combination sets, CombiLine modules or mounting plates. This modular construction helps electrical installers configure the enclosure efficiently for a wide range of sub-distribution requirements.
Typical Applications
- Electrical sub-distribution boards.
- Commercial building distribution systems.
- Industrial low-voltage control and distribution panels.
- Metering and protective-device assemblies.
- CombiLine modular distribution systems.
- Indoor wall-mounted electrical installations.
Technical Specifications
Tick the specs you need, then view products that match.
| IP Rating | IP55 | |
|---|---|---|
| Product Series | S&J TwinLine | |
| Device Type | Enclosure / Cabinet | |
| Series | TwinLine | |
| Order code | 2CPX010105R9999 | |
| Product group | DESUJ Sub Distribution | |
| Product type | Wall-mounting electrical enclosure | |
| Protection rating | IP55 | |
| Protection class | Class II, double insulated | |
| Impact protection | IK08 | |
| Height | 650 mm | |
| Width | 300 mm | |
| Depth | 275 mm | |
| Space units | 48 | |
| Grid units | 4 | |
| Panel width | 1 | |
| Enclosure material | Sheet steel | |
| Door material | Sheet steel | |
| Finish | Powder coated | |
| Colour | RAL 7035 light grey | |
| Door type | Single leaf | |
| Door opening angle | approx. 180° | |
| Mounting type | Wall mounted | |
| Application | Indoor electrical distribution installations |
Frequently Asked Questions
What is the ABB TL104S used for?
The TL104S is a wall-mounting enclosure designed for indoor electrical sub-distribution systems, including metering, protective devices, CombiLine modules and related low-voltage equipment.
What are the dimensions of the ABB TL104S?
The enclosure measures 650 mm high × 300 mm wide × 275 mm deep.
What protection rating does the TL104S provide?
The ABB TL104S has an IP55 protection rating and IK08 impact resistance.
Is the ABB TL104S double insulated?
Yes. The TL104S is a protection class II double-insulated enclosure.
How many space units does the TL104S provide?
The TL104S provides 48 space units in a one-panel-width enclosure arrangement.
Trusted ABB Enclosure Technology
ABB TwinLine enclosures provide a robust and modular platform for professional low-voltage distribution installations, combining durable construction, flexible internal configuration and dependable environmental protection.
