Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKV413200S0001 ABB EPX-PB418 400A 18-Way Panel Board – Protecta Power Enclosures
ABB EPX-PB418 (1SKV413200S0001) is a Protecta Power Enclosures 400 A, 18-way low-voltage electrical panel board designed for organised power distribution to multiple outgoing circuits in commercial and industrial installations.
£4,912.98
Why Choose the ABB EPX-PB418 400A 18-Way Panel Board?
The ABB EPX-PB418 is a 400 A, 18-way panel board belonging to the ABB Protecta Power Enclosures product range. Designed for low-voltage electrical distribution applications, this panel board provides a dedicated solution for installations requiring a 400 A rated distribution assembly with 18 outgoing ways.
As part of the ABB Protecta Power Enclosures family, the EPX-PB418 supports organised electrical power distribution within industrial and commercial installations. Its 400 A current rating and 18-way configuration make it suitable for distribution system designs requiring multiple outgoing circuits within a coordinated panel board arrangement.
Identified by ABB order code 1SKV413200S0001, the EPX-PB418 is intended for electrical contractors, consulting engineers, panel builders and facilities professionals specifying ABB distribution equipment. The panel board should be selected alongside compatible protective devices, incoming equipment and accessories according to the electrical requirements of the installation.
Key Advantages
- Genuine ABB Protecta Power Enclosures 400 A panel board.
- 18-way configuration for distributing electrical power to multiple outgoing circuits.
- 400 A rated current for appropriately designed low-voltage distribution applications.
- Supports organised circuit distribution within commercial and industrial electrical installations.
- Part of ABB's coordinated Protecta Power electrical distribution product range.
- Suitable for professional electrical contractors and distribution system designers.
- Supports structured circuit allocation and distribution board planning.
- Designed for integration with compatible ABB panel board equipment and accessories.
- Provides a manufacturer-specific solution for 400 A, 18-way panel board requirements.
- ABB order code 1SKV413200S0001 enables accurate product identification, specification and procurement.
Key Features
- ABB Protecta Power Enclosures product family.
- EPX-PB418 manufacturer product designation.
- ABB order code 1SKV413200S0001.
- 400 A rated current.
- 18 outgoing ways.
- Panel board configuration for low-voltage electrical distribution.
- Designed for industrial and commercial power distribution applications.
- Supports the arrangement of multiple outgoing electrical circuits.
- Intended for use with appropriately selected compatible protective devices and accessories.
- Suitable for professional electrical distribution board installation.
- Dedicated ABB product identification for accurate project specification.
Technical Specifications
- Manufacturer: ABB
- Product range: Protecta Power Enclosures
- Model: EPX-PB418
- ABB order code: 1SKV413200S0001
- Product designation: EPX-PB418 Panel Board 400A - 18 Ways
- Product type: Electrical panel board
- Product category: Low-voltage electrical distribution boards
- Rated current: 400 A
- Number of ways: 18
- Distribution application: Multiple outgoing electrical circuits
- Product family: ABB Protecta Power
- Installation application: Commercial and industrial low-voltage electrical distribution
- Associated equipment: Compatible incoming and outgoing protective devices and panel board accessories
- Intended users: Electrical contractors, panel builders and qualified installation professionals
- Product classification: 400 A 18-way panel board
400A Power Distribution with an 18-Way Panel Board Configuration
Commercial and industrial electrical installations require appropriately designed distribution equipment to supply multiple circuits while providing a structured arrangement for electrical protection and control. The ABB EPX-PB418 400 A panel board is designed for applications requiring an 18-way distribution configuration within the Protecta Power product range.
The 400 A rating identifies the panel board's specified current rating, while the 18 outgoing ways provide the designated circuit positions for the intended distribution arrangement. These characteristics make the EPX-PB418 relevant to electrical installations where multiple downstream circuits must be accommodated within a coordinated distribution system.
The panel board should be specified alongside appropriately rated incoming protection, outgoing circuit protective devices, conductors and associated accessories. The number of available ways does not determine the permissible load on each circuit, and the completed installation must be designed with consideration for circuit loading, protective device coordination and the available prospective fault current.
As part of the ABB Protecta Power Enclosures range, the EPX-PB418 should be installed in accordance with the relevant ABB technical documentation. The final assembly's short-circuit performance, enclosure protection, electrical configuration and compliance with applicable BS EN IEC 61439 requirements depend on the complete verified distribution board arrangement and the equipment installed.
Typical Applications
- Commercial building low-voltage electrical distribution.
- Industrial electrical power distribution systems.
- Electrical plant rooms and distribution board installations.
- Manufacturing facilities requiring multiple outgoing circuits.
- Warehouses and logistics facilities.
- Office buildings and commercial premises.
- Retail and mixed-use building electrical installations.
- Infrastructure and facilities management projects.
- Electrical distribution system upgrades and refurbishment.
- Projects specifying a 400 A, 18-way ABB panel board.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | ABB Protecta Power | |
|---|---|---|
| Device Type | Panel Board | |
| Number of Outgoing Ways | 18 | |
| Current | 400 A | |
| Metering | No metering |
Frequently Asked Questions
What is the ABB EPX-PB418 used for?
The ABB EPX-PB418 is a 400 A, 18-way electrical panel board from the ABB Protecta Power Enclosures range. It is intended for low-voltage power distribution applications requiring multiple outgoing electrical circuits within a coordinated panel board arrangement.
What is the current rating of the ABB EPX-PB418?
The ABB EPX-PB418 has a specified 400 A rated current. The completed electrical installation must be designed and protected according to the relevant load requirements, circuit configuration and applicable electrical standards.
How many ways does the ABB EPX-PB418 panel board have?
The EPX-PB418 is specified as an 18-way panel board. Its 18-way configuration provides designated positions for outgoing circuits, subject to the compatible protective devices and the manufacturer's assembly requirements.
Which ABB product range does the EPX-PB418 belong to?
The EPX-PB418 belongs to the ABB Protecta Power Enclosures product group. Compatible incoming devices, outgoing protective devices and installation accessories should be selected using the applicable ABB Protecta Power technical documentation.
What is the ABB order code for EPX-PB418?
The official ABB order code is 1SKV413200S0001. The manufacturer product designation is EPX-PB418, identifying a 400 A, 18-way panel board within the ABB Protecta Power Enclosures range.
Trusted by Electrical Panel Builders Worldwide
ABB Protecta Power Enclosures provide coordinated solutions for professional low-voltage electrical distribution installations. The EPX-PB418 combines a specified 400 A current rating with an 18-way panel board configuration, supporting organised circuit distribution and reliable equipment selection for appropriately designed industrial and commercial electrical systems.
