Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKT992022C0001 ABB EPP-ST-1212/168 Protecta Plus VSL 12+12 / 16+8-Way Solid Door
ABB EPP-ST-1212/168 is a solid replacement door designed for compatible 12+12-way and 16+8-way ABB Protecta Plus vertical split-load distribution-board assemblies.
£60.66
Why Choose the ABB EPP-ST-1212/168 Protecta Plus VSL Door?
The ABB EPP-ST-1212/168 is a dedicated solid replacement door for Protecta Plus vertical split-load (VSL) distribution boards. Supplied under ABB order code 1SKT992022C0001, it is specifically designed for compatible 12+12-way and 16+8-way Protecta Plus VSL configurations.
As part of the ABB Protecta Plus Distribution Board accessory range, the EPP-ST-1212/168 provides a system-matched front closure for the corresponding vertical split-load enclosure. Its solid-door construction helps protect internal distribution equipment while maintaining the intended appearance and enclosure architecture of the Protecta Plus system.
The compatible 12+12-way and 16+8-way VSL boards share an enclosure format of approximately 1580 × 450 × 125 mm. Protecta Plus equipment is designed for indoor wall installation, with the completed enclosure providing IP43 protection with its door fitted and IK07 mechanical resistance.
Key Advantages
- Purpose-designed solid replacement door for ABB Protecta Plus VSL distribution boards.
- Compatible with both 12+12-way and 16+8-way vertical split-load configurations.
- ABB system-matched construction supports correct fit with compatible Protecta Plus enclosures.
- Provides a robust front closure for indoor distribution-board assemblies.
- Supports IP43 enclosure protection when correctly fitted to the intended Protecta Plus board.
- Suitable for replacement, refurbishment and completion of compatible distribution-board installations.
Key Features
- ABB Protecta Plus Distribution Board range.
- Solid replacement door.
- Designed for vertical split-load (VSL) distribution boards.
- 12+12-way compatibility.
- 16+8-way compatibility.
- Matched to VSL boards with an approximate enclosure height of 1580 mm.
- Designed for wall-mounted indoor distribution assemblies.
- Purpose-built ABB accessory for coordinated Protecta Plus installations.
Reliable Enclosure Protection for Protecta Plus VSL Boards
A correctly matched distribution-board door provides the front closure required to protect internal electrical equipment while allowing authorised access for inspection and maintenance. Using the designated manufacturer accessory also helps retain the intended mechanical fit and protective characteristics of the completed enclosure.
The ABB EPP-ST-1212/168 is specifically matched to 12+12-way and 16+8-way Protecta Plus vertical split-load boards. Because these configurations share the same enclosure dimensions, the dedicated door provides a common replacement solution for either compatible VSL arrangement.
Typical Applications
- ABB Protecta Plus 12+12-way vertical split-load distribution boards.
- ABB Protecta Plus 16+8-way vertical split-load distribution boards.
- Replacement of damaged or missing distribution-board doors.
- Commercial building electrical distribution.
- Industrial low-voltage distribution installations.
- Maintenance and refurbishment of compatible Protecta Plus assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | ABB Protecta Plus | |
| Series | Protecta Plus | |
| ABB order code | 1SKT992022C0001 | |
| Product type | Solid replacement distribution-board door | |
| Product group | Protecta Plus Distribution Board | |
| Board type | Vertical split-load (VSL) | |
| Compatible configuration | 12+12 ways / 16+8 ways | |
| Compatible VSL board ratings | 125 / 160 / 250 A | |
| Compatible board dimensions (H × W × D) | approx. 1580 × 450 × 125 mm | |
| Installation environment | Indoor | |
| Installation type | Wall-mounted distribution-board assembly | |
| System degree of protection | IP43 with door fitted | |
| System mechanical resistance | IK07 | |
| System construction | Epoxy-coated metal sheet | |
| System compliance | IEC / BS EN 61439-1 and 61439-2 |
Frequently Asked Questions
What is the ABB EPP-ST-1212/168 used for?
The EPP-ST-1212/168 is a solid replacement door for compatible ABB Protecta Plus vertical split-load distribution boards.
Which Protecta Plus configurations are compatible with the EPP-ST-1212/168?
The door is designed for both 12+12-way and 16+8-way Protecta Plus VSL distribution boards.
Is the EPP-ST-1212/168 a complete distribution board?
No. The EPP-ST-1212/168 is a replacement enclosure door and is intended for use with the corresponding Protecta Plus VSL distribution-board assembly.
What size boards use the EPP-ST-1212/168 door?
The compatible 12+12-way and 16+8-way VSL boards have approximate enclosure dimensions of 1580 × 450 × 125 mm.
What protection does a compatible Protecta Plus board provide with the door fitted?
The Protecta Plus enclosure system provides IP43 protection with the door fitted and IK07 mechanical resistance.
What is the ABB order code for the EPP-ST-1212/168?
The ABB order code for the EPP-ST-1212/168 is 1SKT992022C0001.
Trusted by Electrical Installers Worldwide
ABB Protecta Plus distribution-board accessories provide electrical installers, contractors and panel builders with coordinated components for completing, maintaining and refurbishing dependable low-voltage distribution assemblies in commercial and industrial installations.
