Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKT990004C0001 ABB EPP-GP B Protecta Plus Plain Gland Plate
ABB EPP-GP B is a plain gland plate accessory designed for cable-entry preparation on compatible ABB Protecta Plus distribution boards.
£3.86
Why Choose the ABB EPP-GP B Protecta Plus Plain Gland Plate?
The ABB EPP-GP B is a dedicated plain gland plate accessory designed for use with ABB Protecta Plus distribution boards. Identified by ABB order code 1SKT990004C0001, it provides a suitable gland plate solution for cable-entry preparation within compatible Protecta Plus electrical distribution installations.
As part of the ABB Protecta Plus distribution board accessory range, the EPP-GP B is intended to support professional panel assembly and installation. Its plain format allows the installer to prepare cable-entry openings according to the requirements of the particular installation rather than relying on predetermined knockouts.
The EPP-GP B is specifically listed by ABB as the Protecta Plus Glandplate Plain, providing an original ABB accessory for Protecta Plus distribution board systems and helping maintain a consistent, purpose-designed enclosure installation.
Key Advantages
- Genuine ABB Protecta Plus distribution board accessory.
- Plain gland plate allows cable-entry openings to be prepared for the installation.
- Designed specifically for use with compatible ABB Protecta Plus distribution boards.
- Supports organised cable entry into electrical distribution assemblies.
- Useful for installations where predetermined gland knockouts are not required.
- ABB order code 1SKT990004C0001 provides precise product identification.
Key Features
- ABB Protecta Plus accessory range.
- Plain gland plate configuration.
- Designed for distribution board cable-entry applications.
- Suitable for installer-prepared cable or gland openings.
- Purpose-designed for compatible Protecta Plus assemblies.
- Manufacturer reference EPP-GP B.
- ABB order code 1SKT990004C0001.
Practical Cable Entry for Protecta Plus Distribution Boards
Gland plates provide a controlled area through which power, control and other electrical cables can enter an enclosure. A plain gland plate allows installers to create appropriately positioned openings to suit the cable glands and wiring arrangement required by the installation.
The ABB EPP-GP B is designed as part of the Protecta Plus accessory system, making it suitable for electrical contractors and panel builders completing compatible ABB distribution board installations. Using the correct system accessory helps provide a practical and consistent approach to cable management and enclosure assembly.
Typical Applications
- ABB Protecta Plus distribution board installations.
- Commercial electrical distribution systems.
- Industrial electrical distribution assemblies.
- Custom cable-entry preparation.
- Electrical panel and switchboard installation.
- Replacement or installation of Protecta Plus gland plate accessories.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | ABB Protecta Plus | |
|---|---|---|
| Device Type | Accessory | |
| Series | Protecta Plus | |
| ABB order code | 1SKT990004C0001 | |
| Product type | Plain gland plate | |
| Application | Distribution board cable entry | |
| Configuration | Plain gland plate | |
| Compatibility | ABB Protecta Plus distribution boards | |
| ABB product group | Protecta Plus Distribution Board |
Frequently Asked Questions
What is the ABB EPP-GP B used for?
The EPP-GP B is a plain gland plate used with compatible ABB Protecta Plus distribution boards to provide an area for preparing cable-entry openings.
Is the ABB EPP-GP B supplied with predetermined cable knockouts?
No. The EPP-GP B is specified as a plain gland plate, allowing cable-entry openings to be prepared to suit the requirements of the installation.
Which ABB product range is the EPP-GP B designed for?
It is designed as an accessory for the ABB Protecta Plus distribution board range.
What is the ABB order code for the EPP-GP B?
The ABB order code is 1SKT990004C0001.
Where is the EPP-GP B typically installed?
It is typically fitted to a compatible Protecta Plus distribution board where a plain gland plate is required for customised cable entry.
Trusted by Electrical Professionals Worldwide
ABB Protecta Plus distribution boards and accessories are designed to provide practical, coordinated solutions for electrical distribution installations, with system accessories such as the EPP-GP B supporting professional cable entry and panel assembly.
