Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZKS11B is an 11-position neutral terminal block for compatible UK600 electrical distribution enclosures, featuring five 16 mm² and six 6 mm² conductor connection positions.
£8.40
The ABB ZKS11B, manufacturer order code 2CPX063168R9999, is a neutral (N) terminal block designed for compatible ABB UK600 electrical distribution enclosures. Featuring five 16 mm² terminal positions and six 6 mm² terminal positions, it provides a total of 11 neutral connection positions for organising neutral conductors within low-voltage distribution assemblies.
Part of the ABB UK600 Enclosures accessory range, the ZKS11B helps electrical installers establish an orderly neutral conductor termination arrangement. Its combination of larger and smaller terminal positions is useful in distribution boards where conductors of different cross-sections need to be accommodated within a dedicated neutral connection assembly.
The ABB ZKS11B terminal block is suitable for new distribution board installations, electrical enclosure refurbishment and replacement applications where the specific UK600 assembly supports this accessory. It offers a practical solution for electrical contractors, panel builders and maintenance engineers seeking an ABB neutral terminal block with a defined 5 × 16 mm² + 6 × 6 mm² terminal configuration.
The ABB ZKS11B neutral terminal block provides a dedicated connection arrangement for neutral conductors within compatible electrical distribution equipment. Its five 16 mm² and six 6 mm² terminal positions allow different conductor sizes to be accommodated in a structured terminal assembly, helping installers organise wiring and identify neutral termination points during installation and maintenance.
Correct neutral conductor termination is important for the safe operation of low-voltage electrical systems. The ZKS11B should be selected and installed according to the applicable ABB instructions and the complete distribution board design. Installers must verify conductor compatibility, permitted connection arrangements, tightening requirements and any required separation of neutral circuits associated with residual current protection. The terminal configuration alone does not establish the block's electrical current rating.
Tick the specs you need, then view products that match.
| Product Series | ABB UK600 | |
|---|---|---|
| Device Type | Busbar / Terminal | |
| Current | 100 A | |
| Material | Plastic |
The ABB ZKS11B is a neutral terminal block used to organise and terminate neutral conductors within compatible ABB UK600 electrical distribution assemblies.
The ZKS11B provides 11 terminal positions in total, comprising five 16 mm² positions and six 6 mm² positions.
The N designation identifies the ZKS11B as a neutral terminal block, intended for neutral conductor connections in a suitably designed electrical distribution system.
The specified configuration is 5 × 16 mm² + 6 × 6 mm². The suitability of individual conductor materials, constructions and termination methods must be confirmed against the applicable manufacturer instructions.
The ZKS11B belongs to the ABB UK600 Enclosures accessory range. Compatibility with the particular UK600 enclosure and internal mounting arrangement should be verified before installation.
The ZKS11B is designated as a neutral (N) terminal block. It should not be substituted for a protective earth terminal block unless ABB explicitly approves that application.
No. The ZKS11B is a conductor termination accessory, not a circuit breaker, fuse or residual current protective device. Appropriate electrical protection must be provided separately as required by the installation design.
A specific current rating should not be inferred from the terminal cross-sections alone. The permitted current must be established from the applicable ABB technical documentation and the requirements of the complete electrical assembly.
Yes, where the existing distribution board is compatible with the ZKS11B neutral terminal block and the proposed conductor connections meet the relevant electrical installation requirements.
The ABB manufacturer order code is 2CPX063168R9999, corresponding to the ZKS11B neutral terminal block with five 16 mm² and six 6 mm² terminal positions.
ABB UK600 enclosure accessories support professional electrical distribution board construction, conductor organisation and maintenance. The ABB ZKS11B neutral terminal block provides electrical contractors, panel builders and maintenance professionals with an 11-position neutral termination solution for compatible UK600 distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.