Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZK237B 2CPX063163R9999 is a 30-way blue neutral quick-plug terminal block for compatible ABB distribution enclosure terminal carriers, with 23 spring-clamp connections for 1.5–4 mm² conductors and 7 screw connections for 2.5–25 mm² conductors. Rated 63 A and 230 V, measuring 131 x 32 x 31 mm.
£21.93
The ABB ZK237B Neutral Terminal Block (2CPX063163R9999) is a genuine ABB 30-way N quick-plug terminal block designed for organised neutral conductor connections in compatible electrical distribution enclosures. Part of the ABB UK600 Enclosures accessory range, it combines spring-clamp and screw-connection technologies to accommodate different conductor sizes within one compact terminal assembly.
The ZK237B provides 23 spring-clamp terminals for conductors from 1.5 to 4 mm² and 7 screw-connection terminals for conductors from 2.5 to 25 mm². This combination provides a total of 30 neutral connection points, making the terminal block suitable for distribution board installations requiring multiple neutral connections and larger conductor termination capacity.
Designed for compatible ABB quick-plug terminal carriers, the ZK237B features tool-free mounting using plug-in and latching technology. Its distinctive blue neutral identification supports clear circuit organisation, while provision for preprinted, self-adhesive numbering strips helps installers identify individual terminal positions. The compact assembly measures 131 mm wide, 32 mm high and 31 mm deep.
The ABB ZK237B is designed for electrical distribution installations where a substantial number of neutral conductors must be terminated in an organised manner. Its 30 terminal positions provide a combination of smaller spring-clamp connections and larger screw terminals within a single neutral terminal block.
The 23 spring-clamp positions accommodate conductors with cross-sections from 1.5 to 4 mm². Spring-clamp technology provides a practical connection method for appropriately prepared conductors, while the 7 screw terminals accommodate larger conductor cross-sections from 2.5 to 25 mm².
This arrangement is particularly useful in distribution boards where multiple circuit neutrals must be connected alongside larger neutral conductors. The suitability of each connection must be checked against the conductor type, preparation requirements and applicable ABB installation instructions.
The ZK237B uses ABB's quick-plug terminal system. The terminal block is designed to attach to a compatible carrier through a simple plug-in and latching mechanism, allowing the block itself to be mounted without tools.
Tool-free mounting should not be confused with tool-free termination at every connection point. The ZK237B combines spring-clamp conductor connections with screw-connection terminals, and the screw terminals require the appropriate installation procedure and tightening method.
The terminal block is identified in blue, corresponding to its neutral conductor function. ABB also provides for the use of preprinted, self-adhesive numbering strips, allowing individual terminal positions to be identified in accordance with the intended distribution board wiring arrangement.
The ABB ZK237B 2CPX063163R9999 is intended for use with compatible ABB quick-plug terminal carriers, including suitable arrangements within the UK600 enclosure system. It is a terminal block component and should not be assumed to mount directly onto every enclosure or DIN rail without the appropriate carrier or mounting accessory.
When selecting the ZK237B, installers should confirm the available terminal carrier space, enclosure configuration, neutral circuit arrangement and any additional accessories required for the completed installation.
Although the ZK237B provides multiple neutral connection positions, these must be assigned according to the electrical design. Neutral conductors belonging to circuits that require separate neutral arrangements must not be interconnected indiscriminately, particularly where residual current devices or other protective arrangements require circuit-specific neutral separation.
The ABB ZK237B is rated at 63 A and 230 V according to its product specification. These values describe the terminal block and must not be used to justify conductor loading beyond the permitted capacity of the connected conductors, terminals or complete distribution assembly.
Electrical installation should be carried out by a competent professional using the correct conductor preparation, terminal tightening procedures and ABB-approved mounting arrangement. The terminal block is intended for neutral connections; it is not a substitute for a protective earth terminal block.
The ZK237B is an internal electrical connection component rather than a standalone protective enclosure. Its safe use depends on installation within a suitable enclosure assembly providing the required protection against contact and environmental conditions.
Tick the specs you need, then view products that match.
| Current | 63 A | |
|---|---|---|
| Device Type | Busbar / Terminal | |
| Product Series | ABB UK600 | |
| Product group | UK600 Enclosures | |
| Product model | ZK237B | |
| ABB order code | 2CPX063163R9999 | |
| Manufacturer description | ZK237B N-terminal blocks 23x4+7x25qmm | |
| Product type | Neutral terminal block | |
| Terminal connection type | N terminal | |
| Mounting system | ABB quick-plug terminal carrier | |
| Number of terminal positions | 30 | |
| Number of connection terminals | 30 | |
| Small conductor connections | 23 | |
| Small conductor cross-section | 1.5–4 mm² | |
| Small conductor connection technology | Spring clamp | |
| Large conductor connections | 7 | |
| Large conductor cross-section | 2.5–25 mm² | |
| Large conductor connection technology | Screw connection | |
| Rated voltage | 230 V | |
| Rated operational voltage | 230 V | |
| Rated current | 63 A | |
| Terminal identification colour | Blue | |
| Mounting method | Plug-in and latching technology | |
| Tool-free carrier mounting | Yes | |
| Terminal labelling | Preprinted, self-adhesive numbering strips supported | |
| Terminal labelling reference | DIN VDE 0603 Part 1 | |
| Product width | 131 mm | |
| Product height | 32 mm | |
| Product depth | 31 mm | |
| Product net weight | 0.122 kg | |
| Minimum order quantity | 1 piece | |
| EAN / GTIN | 4011617631637 | |
| Customs tariff number | 85369010 |
The ABB ZK237B is a 30-way neutral terminal block for compatible electrical distribution enclosures and quick-plug terminal carriers. It provides 23 spring-clamp connections and 7 screw connections for neutral conductor termination.
The ABB ZK237B has 30 terminal positions: 23 spring-clamp terminals for 1.5–4 mm² conductors and 7 screw terminals for 2.5–25 mm² conductors.
The ABB ZK237B has a specified rated current of 63 A and rated voltage of 230 V. The completed installation must also comply with the ratings of the conductors, connected equipment and enclosure assembly.
Yes. The ZK237B uses plug-in and latching technology for tool-free attachment to a compatible ABB quick-plug terminal carrier. However, its larger screw-connection terminals still require the correct tools and termination procedure when connecting conductors.
The ABB ZK237B measures 131 mm wide, 32 mm high and 31 mm deep. Its specified net weight is approximately 0.122 kg.
The ABB ZK237B combines high connection capacity, clearly identified neutral terminals and practical quick-plug mounting in a compact distribution board accessory. With 23 spring-clamp connections, 7 larger screw terminals and a 63 A rated current, it provides a flexible neutral termination solution for electricians and panel builders working with compatible ABB enclosure systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.