Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AP612 one-row plastic surface mounting kit in RAL9016 alpine white for converting compatible UK61 electrical distribution enclosures to surface-mounted or partially recessed installations using standard doors.
£55.41
The ABB AP612 is a purpose-designed surface mounting kit for ABB UK600 electrical distribution enclosures, allowing compatible one-row UK61 consumer units to be installed on a wall surface or in a partially recessed arrangement. Identified by ABB order code 2CPX031402R9999, this genuine ABB accessory provides an alternative to conventional fully recessed enclosure installation.
Designed specifically for ABB UK61 one-row enclosures, the AP612 uses an extension frame to convert a compatible flush-mounted distribution enclosure into a surface-mounted or partially recessed installation. The kit incorporates predetermined break-out points to support installation flexibility and is suitable for use with standard enclosure doors.
Manufactured from plastic, the ABB AP612 measures 372 mm high, 384 mm wide and 90 mm deep. Its RAL9016 alpine white finish complements compatible ABB UK600 distribution equipment, providing a coordinated appearance for residential and commercial electrical installations.
Electrical distribution enclosures are frequently installed in buildings with different wall constructions, available recess depths and installation requirements. Although flush-mounted consumer units provide a neat integrated appearance, a fully recessed installation is not always practical, particularly during refurbishment work or when modifications to an existing wall need to be minimised.
The ABB AP612 surface mounting kit provides a practical alternative by allowing a compatible UK61 one-row enclosure to be installed on the wall surface or partially recessed. Its extension frame and predetermined break-out points support the adaptation of the enclosure mounting arrangement while retaining compatibility with the specified standard door configuration.
As an enclosure mounting accessory, the AP612 does not provide circuit protection, switching or electrical distribution functions independently. The compatible UK61 enclosure, protective devices and other required components must be selected separately as appropriate. Installers should verify enclosure compatibility and follow ABB installation instructions when assembling the completed distribution system.
Tick the specs you need, then view products that match.
| Material | Plastic | |
|---|---|---|
| Product Series | ABB UK600 | |
| Device Type | Enclosure / Cabinet | |
| Product series | UK600 Enclosures | |
| ABB order code | 2CPX031402R9999 | |
| EAN / GTIN | 4011617314028 | |
| Product type | Surface mounting kit / wall mounting set | |
| Accessory category | Electrical distribution enclosure mounting accessory | |
| Compatible enclosure | ABB UK61 series | |
| Number of rows | 1 | |
| Associated enclosure format | 12 module positions | |
| Installation options | Surface mounting or partially recessed mounting | |
| Door compatibility | Standard doors only | |
| Construction | Extension frame with predetermined break-out points | |
| Material | Plastic | |
| Colour | Alpine white | |
| RAL colour code | RAL9016 | |
| Height | 372 mm | |
| Width | 384 mm | |
| Depth | 90 mm | |
| Net weight | 0.716 kg | |
| Packaged gross weight | 0.745 kg | |
| Quantity | 1 piece | |
| Application | Mounting conversion for compatible ABB UK61 electrical distribution enclosures |
The ABB AP612 is a surface mounting kit used to adapt compatible ABB UK61 one-row electrical distribution enclosures for wall-mounted or partially recessed installation.
The AP612 is designed for ABB UK61 series one-row enclosures within the UK600 product range. It is suitable for standard door configurations only.
Yes. The AP612 uses an extension frame to allow a compatible UK61 enclosure to be installed in a surface-mounted or partially recessed configuration, rather than requiring a fully recessed installation.
The AP612 measures 372 mm high, 384 mm wide and 90 mm deep. It is manufactured from plastic and has a RAL9016 alpine white finish.
No. The AP612 is a mounting accessory for compatible ABB UK61 enclosures, rather than a complete consumer unit. The enclosure and any required electrical protection devices must be selected separately.
ABB UK600 enclosure accessories provide practical installation flexibility for residential and commercial electrical distribution systems. The ABB AP612 one-row surface mounting kit allows compatible UK61 enclosures to be adapted for surface-mounted or partially recessed installation, combining purpose-designed plastic construction with a coordinated RAL9016 alpine white finish for professional electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.