Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1TVC151800S3103 ABB EPH-S11116 Protecta Home 16-Way 100A RCCB Consumer Unit
ABB EPH-S11116 Protecta Home 16-way steel consumer unit with a factory-fitted 100 A RCCB incomer, shrouded busbar and earth and neutral bars, designed for domestic electrical distribution and residual current protection.
£172.81
Why Choose the ABB EPH-S11116 Protecta Home 16-Way Consumer Unit?
The ABB EPH-S11116 is a robust and reliable 16-way, 100 A RCCB incomer consumer unit designed for organised electrical distribution and residual current protection in domestic and residential installations. Featuring a factory-fitted 100 A residual current circuit breaker (RCCB), this consumer unit provides a central distribution point for multiple outgoing electrical circuits while incorporating earth leakage protection. As part of the established ABB Protecta Home consumer unit series, it offers electricians and electrical contractors a practical solution for residential installations requiring a single RCCB-controlled distribution arrangement.
The EPH-S11116 features a single RCCB incomer configuration, allowing compatible outgoing circuit protection devices to be installed downstream of the factory-fitted RCCB. This arrangement provides common residual current protection for the connected circuit group, while appropriately rated miniature circuit breakers (MCBs) can provide individual overload and short-circuit protection. The RCCB also provides switching and isolation of its downstream circuits when used in accordance with the manufacturer's instructions and appropriate safe isolation procedures.
With 16 outgoing ways and a 100 A rated RCCB incomer, the EPH-S11116 provides generous circuit capacity for domestic electrical distribution. Its durable RAL 7035 grey steel enclosure offers robust housing for electrical components, while its 250 × 380 × 105 mm (H × W × D) nominal dimensions support practical wall-mounted installation. The unit is supplied with a shrouded busbar, earth and neutral bars and installation instructions to assist with efficient installation and circuit organisation.
Key Advantages
- Reliable 16-way consumer unit designed for domestic electrical distribution.
- 100 A RCCB incomer provides residual current protection for connected outgoing circuits.
- Factory-fitted RCCB simplifies the installation of an RCCB-controlled distribution arrangement.
- 16 outgoing ways accommodate multiple compatible modular circuit protection devices.
- Single RCCB configuration provides a straightforward arrangement for electrical distribution and residual current protection.
- Robust steel enclosure provides durable housing for electrical distribution components.
- Supplied with a shrouded busbar, earth bar and neutral bar for organised electrical connections.
- Designed for integration with suitable ABB modular circuit protection devices.
- Wall-mounted enclosure supports convenient installation in residential electrical distribution locations.
- 16-way capacity provides additional flexibility for installations requiring numerous outgoing circuits.
- Part of the established ABB Protecta Home range for residential electrical installations.
Key Features
- ABB Protecta Home consumer unit series.
- 16 outgoing ways for domestic electrical circuit distribution.
- 100 A rated RCCB incomer for residual current protection.
- Factory-fitted residual current circuit breaker for the outgoing circuit group.
- Single RCCB incomer arrangement rather than a multiple-RCCB split-load configuration.
- Steel enclosure construction designed for fixed electrical installations.
- RAL 7035 grey enclosure finish for a professional electrical distribution installation.
- BS EN 61439-3 assembly standard for distribution boards intended for operation by ordinary persons.
- Shrouded busbar supplied for connection of compatible outgoing protective devices.
- Includes earth and neutral bars for electrical circuit connections.
- Designed to accommodate suitable ABB modular circuit protection equipment.
- Wall-mounted format for domestic and residential electrical distribution.
- 250 × 380 × 105 mm nominal dimensions for installation planning.
- Suitable for new electrical installations, consumer unit replacements and residential refurbishment projects.
Reliable Residual Current Protection for Domestic Electrical Distribution
RCCB consumer units such as the ABB EPH-S11116 Protecta Home provide a central distribution point for electrical circuits while incorporating residual current protection. The factory-fitted 100 A RCCB monitors the balance of current flowing through the live and neutral conductors. If an earth leakage imbalance exceeds the device's specified operating threshold, the RCCB disconnects the associated circuits to help reduce the risk of electric shock and other electrical hazards.
The single RCCB incomer arrangement allows multiple outgoing circuits to share a common residual current protective device. This provides a straightforward distribution configuration where shared RCCB protection is appropriate for the electrical installation. However, because the outgoing circuits are connected through the same RCCB, an earth leakage fault affecting one circuit can disconnect all circuits supplied through that device. Circuit division, selectivity and continuity of supply requirements should therefore be considered during electrical installation design.
The ABB Protecta Home series combines durable steel enclosures with practical installation features for residential electrical distribution. The EPH-S11116 is supplied with a factory-fitted RCCB, shrouded busbar and earth and neutral bars, supporting organised installation of compatible outgoing protective devices. The RCCB provides residual current protection but does not itself provide overload or short-circuit protection. Appropriately rated overcurrent protective devices are therefore required, and installation must be carried out by a competent electrician in accordance with applicable electrical regulations, including BS 7671.
Typical Applications
- Domestic electrical distribution in houses and residential properties.
- Residential installations requiring a 16-way RCCB consumer unit.
- Electrical distribution for lighting and socket outlet circuits.
- Property refurbishment and residential electrical rewiring projects.
- Consumer unit replacement and electrical distribution upgrades.
- Domestic utility areas and household appliance circuits.
- Residential installations requiring common residual current protection for multiple circuits.
- Small fixed electrical distribution systems with appropriately designed circuit protection.
- Electrical installations using compatible ABB modular outgoing protective devices.
- Wall-mounted electrical distribution applications requiring a 100 A RCCB incomer.
Technical Specifications
Tick the specs you need, then view products that match.
| Material | Steel | |
|---|---|---|
| Product Series | ABB Protecta Home | |
| Device Type | Consumer Unit | |
| Incomer | RCCB | |
| Number of Outgoing Ways | 16 | |
| Module Capacity | 16 modules | |
| Current | 100 A | |
| Product group | Protecta Home | |
| Series | Protecta Home Consumer Units | |
| ABB order code | 1TVC151800S3103 | |
| Product type | RCCB incomer consumer unit / electrical distribution board | |
| Number of ways | 16 | |
| Outgoing module capacity | 16 modules | |
| RCCB rated current | 100 A | |
| RCCB quantity | 1 | |
| Incomer type | Residual current circuit breaker (RCCB) | |
| Configuration | Single RCCB incomer consumer unit | |
| Residual current protection | Factory-fitted RCCB | |
| Enclosure material | Steel | |
| Enclosure colour | RAL 7035 grey | |
| Applicable assembly standard | BS EN 61439-3 | |
| Mounting type | Wall mounting | |
| Nominal dimensions (H × W × D) | 250 × 380 × 105 mm | |
| Supplied accessories | Shrouded busbar, earth bar, neutral bar and installation instructions | |
| Compatible equipment | Suitable ABB modular circuit protection devices | |
| Application | Domestic and residential electrical distribution |
Frequently Asked Questions
What is the ABB EPH-S11116 used for?
The ABB EPH-S11116 is a 16-way domestic consumer unit designed to distribute electricity to multiple outgoing circuits while providing residual current protection through a factory-fitted 100 A RCCB. It is suitable for residential electrical installations where a common RCCB incomer arrangement is appropriate.
How many ways does the ABB EPH-S11116 consumer unit have?
The EPH-S11116 provides 16 outgoing ways for compatible modular circuit protection devices. The number of circuits accommodated depends on the module width and configuration of the selected protective devices.
What is the RCCB rating of the ABB EPH-S11116?
The EPH-S11116 features a 100 A rated residual current circuit breaker (RCCB). This represents the rated current-carrying capacity of the RCCB rather than its residual current trip sensitivity. Suitable overcurrent protection must be provided as part of the electrical installation.
Does the ABB EPH-S11116 include a main switch?
The ABB EPH-S11116 uses a factory-fitted 100 A RCCB as its incomer rather than the separate main switch arrangement found in other Protecta Home consumer units. The RCCB provides residual current protection and switching of its downstream circuits, subject to the device's isolation suitability and correct installation procedures.
What are the dimensions of the ABB EPH-S11116?
The ABB EPH-S11116 has nominal dimensions of 250 mm high, 380 mm wide and 105 mm deep. Its robust steel enclosure is designed for wall-mounted domestic electrical distribution installations.
Trusted ABB Electrical Distribution Solutions
ABB Protecta Home consumer units provide dependable electrical distribution solutions for domestic and residential installations. The ABB EPH-S11116 combines a robust 16-way steel enclosure, a factory-fitted 100 A RCCB and practical circuit connection accessories to offer electricians a reliable solution for organised electrical distribution and residual current protection.
