1TVC151800S3069 ABB EPH-S16218 Protecta Home 18 Way 100A Main Switch Dual 63A RCD Consumer Unit

Why Choose the ABB EPH-S16218 Protecta Home 18-Way 100A Dual RCD Consumer Unit?

The ABB EPH-S16218 (ABB order code 1TVC151800S3069) is an 18-way split-load consumer unit from the ABB Protecta Home range. Its specified configuration combines a 100 A main switch isolator with two 63 A residual current devices (RCDs), providing a coordinated distribution arrangement for suitable residential and similar low-voltage electrical installations.

Identified by ABB as EPH-S16218 18W 100A ISO 2x63A RC, this consumer unit offers 18 outgoing ways together with two RCD-protected sections. The arrangement is designed to support the distribution of outgoing circuits across separate residual current protection groups, subject to the approved internal configuration and the requirements of the completed electrical installation.

The 100 A incoming isolator provides a means of disconnecting the consumer unit supply, while the two 63 A RCDs provide residual current protection for their associated circuit groups. The main switch and RCDs perform different electrical functions: the isolator provides switching and isolation, whereas the RCDs respond to residual current imbalance. Suitable overcurrent protection must also be provided for outgoing circuits.

Part of ABB's Protecta Home consumer unit family, the EPH-S16218 is intended for professional electrical distribution assembly and installation. It is a practical choice for projects requiring a relatively high number of outgoing ways and a dual-RCD arrangement rather than a main-switch-only consumer unit.

Key Advantages

• 18 outgoing ways provide capacity for a substantial residential circuit arrangement.
• 100 A main switch isolator provides a dedicated incoming isolation function.
• Two 63 A RCDs provide separate residual current protection groups.
• Split-load configuration supports the division of outgoing circuits between RCD-protected sections.
• ABB Protecta Home design provides a coordinated consumer unit solution.
• Dual-RCD arrangement offers an alternative to main-switch-only distribution boards.
• Multiple circuit positions support more complex domestic distribution requirements.
• Dedicated main isolation allows the incoming supply to be disconnected using the main switch.
• Two residual current protection sections support planned circuit grouping.
• Suitable for professional consumer unit installations in appropriate indoor locations.
• Part of a wider ABB product range with alternative ways and incoming-device arrangements.
• Supports separately selected outgoing protective devices to match the electrical design.
• Clear manufacturer designation identifies the main switch and RCD configuration.
• ABB order code 1TVC151800S3069 supports accurate product identification.
• Useful for consumer unit refurbishment and replacement where the proposed protective arrangement meets current requirements.

Key Features

• ABB EPH-S16218 Protecta Home consumer unit.
• 18-way outgoing circuit configuration.
• 100 A incoming main switch isolator.
• Two 63 A residual current devices.
• Dual-RCD split-load arrangement.
• Separate RCD-protected circuit sections.
• Incoming electrical isolation function.
• Residual current protection for associated circuit groups.
• Suitable for compatible outgoing circuit protective devices.
• Part of ABB's Protecta Home range.
• Designed for low-voltage electrical distribution.
• Consumer unit format for residential applications.
• Suitable for professional installation and commissioning.
• Alternative to single-RCD consumer unit arrangements.
• Alternative to main-switch-only Protecta Home variants.
• Manufacturer model EPH-S16218.
• ABB order code 1TVC151800S3069.
• Manufacturer designation 18W 100A ISO 2x63A RC.

Understanding the 100A Main Switch and Two 63A RCD Arrangement

The ABB EPH-S16218 combines three important configuration elements: 18 outgoing ways, a 100 A main isolator and two 63 A RCDs. These elements determine the basic layout and purpose of the consumer unit, although the detailed allocation of circuit positions must be confirmed from ABB's installation documentation.

The 100 A main switch provides the incoming isolation function. It allows the supply to the consumer unit to be disconnected for appropriate switching and maintenance operations. The 100 A figure is the rated current of the switch; it does not automatically establish the permissible demand of the installation or the rating of individual outgoing circuits.

The two 63 A residual current devices are intended to protect their associated circuit groups against specified residual current conditions. Their 63 A rating is a current-carrying rating, not their residual operating sensitivity. The RCD sensitivity, device type and other performance characteristics must be verified from the actual devices and the manufacturer documentation.

A dual-RCD split-load arrangement allows circuits to be distributed between two residual current protection sections. This can support planned circuit grouping, but it does not guarantee that an earth leakage fault on one circuit will leave all other circuits energised. Circuits sharing the same RCD may be disconnected together if that RCD operates.

The 18 outgoing ways provide flexibility when designing a distribution schedule. Installers should consider the number of circuits, device widths, conductor routing and the exact allocation of ways to each RCD. The manufacturer-approved internal arrangement must be followed, including the separation of neutral conductors associated with different RCD groups.

Because an RCD does not replace an MCB or other overcurrent protective device, outgoing circuits require appropriate overload and short-circuit protection. Protective devices must be selected for the circuit design and confirmed as compatible with the ABB consumer unit and its busbar system.

The electrical design must also consider RCD selection and unwanted tripping. Modern installations may contain equipment with different residual current characteristics, and the suitability of the fitted RCD type should be assessed against the connected loads and applicable standards. Where individual-circuit residual current protection or improved circuit separation is required, an RCBO-based arrangement may be more appropriate.

The EPH-S16218 should be installed, inspected and commissioned by a competent electrical professional in accordance with ABB's instructions and BS 7671. The installer must verify the actual RCD ratings and types, conductor connections, protective device coordination, enclosure suitability and final test results before energising the installation.

Typical Applications

• Residential electrical distribution installations requiring 18 outgoing ways.
• Domestic consumer unit replacement projects.
• Electrical refurbishment involving dual-RCD distribution.
• New residential electrical installation projects.
• Multi-circuit household electrical distribution.
• Installations specifying a 100 A incoming main isolator.
• Distribution arrangements requiring two 63 A RCD-protected groups.
• Professional electrical contracting projects.
• Suitable indoor electrical service areas.
• Residential building electrical upgrades.
• Low-voltage final-circuit distribution assemblies.
• Electrical installation projects requiring planned RCD circuit grouping.
• Replacement of compatible dual-RCD consumer unit arrangements.
• Projects specifying ABB Protecta Home electrical distribution equipment.