1TVC151800S3063 ABB EPH-S66212 Protecta Home 12-Way 63A Main Switch Consumer Unit with 2 x 63A RCCBs

Why Choose the ABB EPH-S66212 Protecta Home 12-Way Consumer Unit?

The ABB EPH-S66212 is a 12-way, 63 A split-load consumer unit from the ABB Protecta Home range, designed for residential and light commercial electrical distribution installations. Featuring a 63 A main switch isolator and two 63 A residual current circuit breakers (RCCBs), it provides a practical solution for distributing electrical circuits across two RCD-protected groups.

The EPH-S66212 combines a 12-way modular distribution arrangement with a variable split-load configuration, allowing electricians to organise compatible outgoing circuit protection devices according to installation requirements. The two RCCBs provide residual current protection for their respective circuit groups, while the main switch offers a central means of isolating the consumer unit supply.

Housed in a steel enclosure measuring 250 × 380 × 105 mm, the ABB EPH-S66212 provides a compact solution for installations requiring multiple protected circuits. Its Protecta Home design supports professional consumer unit assembly, circuit organisation and maintenance using appropriately selected ABB modular protection equipment.

Key Advantages

• 12-way split-load consumer unit for residential and light commercial electrical distribution.
• 63 A main switch isolator provides central supply isolation.
• Two 63 A RCCBs provide separate residual current protection groups.
• Variable split-load arrangement supports flexible allocation of outgoing circuits.
• Part of the established ABB Protecta Home electrical distribution range.
• Steel enclosure construction provides a durable housing for electrical protection equipment.
• Compact 250 × 380 × 105 mm dimensions support efficient installation in suitable indoor locations.
• Supports organised separation of electrical circuits across two RCCB groups.
• Provides a convenient platform for compatible ABB miniature circuit breakers.
• Suitable for consumer unit replacement, refurbishment and new electrical installations.
• Manufacturer-specified incoming switching and residual current protection arrangement.
• Genuine ABB product identified by order code 1TVC151800S3063.

Key Features

• ABB Protecta Home consumer unit series.
• EPH-S66212 12-way split-load consumer unit.
• 12 outgoing circuit ways.
• 63 A main switch disconnector.
• 2 × 63 A residual current circuit breakers.
• Dual RCCB-protected circuit groups.
• Variable split arrangement for outgoing circuit allocation.
• Steel enclosure for electrical distribution applications.
• Designed to accommodate compatible modular outgoing circuit protection devices.
• Provides central isolation through the main switch.
• Supports residual current protection for circuits connected through the RCCBs.
• Suitable for professional electrical installation and maintenance.
• Nominal height: 250 mm.
• Nominal width: 380 mm.
• Nominal depth: 105 mm.
• ABB manufacturer order code 1TVC151800S3063.

Flexible Split-Load Distribution with Dual 63 A RCCBs

The ABB EPH-S66212 is designed for electrical installations requiring multiple outgoing circuits and a split-load residual current protection arrangement. Its 12-way capacity provides space for compatible modular circuit protection devices, allowing electrical contractors to configure distribution boards according to the circuit requirements of the property.

The consumer unit incorporates a 63 A main switch isolator that provides a central means of disconnecting the incoming supply. Downstream of this main switch, two 63 A RCCBs are used to establish separate residual current protection groups. This arrangement enables outgoing circuits to be distributed between the two RCCBs rather than placing every circuit under one residual current device.

ABB specifies a variable split arrangement for its Protecta Home RCCB split-load consumer units. This provides flexibility when allocating outgoing ways to each RCCB group, subject to the approved busbar arrangement, available space and installation instructions.

The RCCBs are intended to detect residual current imbalance and disconnect their associated circuits when the device's specified operating conditions are met. However, an RCCB does not independently provide overload or short-circuit protection. Appropriate MCBs or other compatible overcurrent protective devices are therefore required for outgoing circuits.

Although splitting circuits between two RCCBs can reduce the number of circuits affected by a single residual current trip, a fault on one circuit may still disconnect other circuits sharing the same RCCB. Final circuit allocation should account for electrical safety, continuity of supply, nuisance tripping considerations and applicable wiring regulations.

The steel enclosure provides a durable housing for the consumer unit assembly, while its compact dimensions make it suitable for appropriately planned indoor electrical distribution installations. The selection of outgoing protective devices, conductor sizes, earthing arrangements and RCCB operating characteristics must follow the electrical design and ABB's installation instructions.

Typical Applications

• Residential electrical consumer unit installations.
• Domestic distribution boards requiring 12 outgoing circuit ways.
• Split-load electrical distribution with two RCCB-protected groups.
• Electrical installations requiring a 63 A main switch.
• Distribution of domestic lighting and socket outlet circuits.
• Small commercial electrical distribution systems.
• Consumer unit replacement and refurbishment projects.
• Electrical distribution boards using compatible ABB miniature circuit breakers.
• Installations requiring separate residual current protection groups.
• Professional electrical contracting and building services projects.