Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKH903009C0001 ABB T09 Neutral and Earth Terminals 9 for Protecta Home Consumer Units
ABB T09 1SKH903009C0001 is a neutral and protective earth terminal accessory from the Protecta Home product range. Designated T09 Terminals Neutral and Earth 9, it is intended for compatible ABB Protecta Home consumer unit terminal arrangements.
£3.56
Why Choose the ABB T09 Neutral and Earth Terminal Set for Protecta Home Consumer Units?
The ABB T09 Neutral and Earth Terminals (1SKH903009C0001) are a genuine ABB electrical distribution accessory from the Protecta Home product range. Identified by the manufacturer designation T09 Terminals Neutral and Earth 9, this accessory is intended to provide a suitable neutral and protective earth termination arrangement within compatible ABB Protecta Home consumer units.
Correct neutral and protective earth termination is essential for safe, organised consumer unit wiring. The ABB T09 is designed for the nine-position terminal configuration identified by its product designation, making it a practical choice for compatible distribution board assemblies, replacement work and electrical installation upgrades.
As a manufacturer-specific accessory, the T09 offers a coordinated solution for electrical contractors working with the ABB Protecta Home consumer unit system. Its exact mounting arrangement, conductor capacities and suitability for a particular enclosure should be confirmed against the applicable ABB technical documentation before installation.
Key Advantages
- Genuine ABB Protecta Home neutral and earth terminal accessory.
- T09 designation identifies the nine-position terminal arrangement.
- Designed for neutral and protective earth termination in compatible consumer units.
- Supports organised conductor connections within electrical distribution assemblies.
- Helps installers maintain a clear distinction between neutral and protective earth functions.
- Suitable for compatible consumer unit assembly and maintenance projects.
- Useful when replacing the corresponding original ABB terminal arrangement.
- Provides a manufacturer-specific alternative to improvised terminal mounting solutions.
- Suitable for professional residential electrical distribution installations.
- Identified by ABB order code 1SKH903009C0001 for accurate product selection.
Key Features
- Manufacturer: ABB.
- Product model: T09.
- ABB order code: 1SKH903009C0001.
- Manufacturer designation: T09 Terminals Neutral and Earth 9.
- Product family: Protecta Home.
- Accessory type: Neutral and protective earth terminal accessory.
- Terminal designation: 9.
- Primary application: Consumer unit neutral and protective earth connections.
- Intended enclosure range: Compatible ABB Protecta Home consumer units.
- Electrical function: Neutral (N) and protective earth (PE) termination.
- Installation role: Internal consumer unit terminal equipment.
- Product selection: Match the exact ABB model and order code.
- Mounting compatibility: Subject to the relevant Protecta Home enclosure configuration.
- Professional installation: Required in accordance with applicable electrical regulations.
Organised Neutral and Protective Earth Termination
The ABB T09 neutral and earth terminal accessory is intended to support the connection of neutral and protective earth conductors within compatible Protecta Home consumer units. These connections serve distinct electrical functions and must be installed according to the distribution board's circuit design.
Neutral terminals provide the designated connection arrangement for circuit neutral conductors. Correct neutral organisation is especially important in installations using residual current protection, where conductors must remain associated with the appropriate protective device or circuit group.
Protective earth terminals provide the designated termination arrangement for circuit protective conductors. These connections are essential to the protective earthing system and must be installed to maintain the required continuity and electrical safety.
The T09 should be selected as the appropriate ABB accessory for the intended consumer unit. Its designation should not be interpreted as permission to combine neutral and protective earth conductors electrically.
T09 Nine-Position Terminal Configuration
The product is identified by ABB as T09 Terminals Neutral and Earth 9. The number nine forms part of the manufacturer's terminal arrangement designation and helps distinguish this accessory from other Protecta Home terminal products.
For example, the wider Protecta Home accessory range includes the T14 Terminals Neutral and Earth 14, order code 1SKH903014C0001. These different designations allow installers to select the terminal arrangement intended for the relevant consumer unit configuration.
The T09 designation should not be assumed to mean nine neutral terminals plus nine earth terminals without confirmation from ABB's detailed terminal drawing. Installers should check the actual number and sizes of available connections before planning the conductor termination arrangement.
Compatibility with ABB Protecta Home Consumer Units
The ABB T09 1SKH903009C0001 belongs to the Protecta Home product family, rather than the ABB UK600 enclosure range. This distinction is important when ordering replacement parts or selecting accessories for a particular distribution board.
Although both product families are manufactured by ABB, their internal mounting arrangements and terminal accessories should not be treated as interchangeable without manufacturer confirmation.
Before ordering, check the existing consumer unit's identification label, enclosure configuration and applicable spare parts information. The terminal accessory must fit the designated mounting location and provide sufficient correctly rated conductor connections for the intended installation.
Installation and Electrical Safety Considerations
Neutral and protective earth terminal connections must be installed by a competent electrical professional. Before installation or replacement, the supply should be safely isolated and the absence of voltage verified using an appropriate procedure.
All conductors must be correctly prepared and terminated within the specified cross-section range. Where screw connections are used, the manufacturer's tightening torque must be observed. The installed terminal arrangement must also provide the necessary conductor retention, electrical continuity and segregation.
The T09 is an internal electrical connection accessory, not a standalone enclosure or protective device. It does not provide overload protection, short-circuit protection or residual current protection independently. The safety and compliance of the completed installation depend on the correctly assembled consumer unit and its associated protective devices.
Typical Applications
- Neutral and protective earth termination in compatible ABB Protecta Home consumer units.
- Residential electrical distribution board installations.
- Replacement of matching Protecta Home terminal accessories.
- Consumer unit maintenance and refurbishment.
- Professional electrical installation and panel assembly.
- Organised circuit neutral conductor termination.
- Protective earth conductor termination within compatible enclosures.
- Electrical distribution board upgrades using manufacturer-specified components.
- Repair and replacement projects requiring ABB T09 terminal equipment.
- Domestic electrical installation projects using ABB Protecta Home equipment.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Consumer Unit | |
|---|---|---|
| Product Series | ABB Protecta Home | |
| Product group | Protecta Home | |
| Product range | ABB Protecta Home | |
| ABB order code | 1SKH903009C0001 | |
| Manufacturer description | T09 Terminals Neutral and Earth 9 | |
| Product type | Neutral and earth terminal accessory | |
| Accessory category | Consumer unit terminal equipment | |
| Terminal functions | Neutral (N) and protective earth (PE) | |
| Manufacturer terminal designation | 9 | |
| Intended application | Compatible Protecta Home electrical distribution assemblies | |
| Installation position | Internal consumer unit terminal arrangement | |
| Terminal construction | Refer to the ABB product drawing | |
| Number of individual N and PE connections | Confirm against the ABB terminal configuration drawing | |
| Conductor cross-section range | Refer to the ABB terminal specification | |
| Conductor connection method | Confirm against ABB installation documentation | |
| Rated current | Not independently verified for this accessory | |
| Rated voltage | Not independently verified for this accessory | |
| Terminal tightening torque | Refer to the ABB installation instructions | |
| Material | Refer to the ABB product specification | |
| Overall dimensions | Refer to the ABB technical drawing | |
| Product weight | Not independently verified | |
| Mounting arrangement | Compatible Protecta Home terminal mounting provisions | |
| Independent IP rating | Not applicable to a standalone internal terminal accessory | |
| Complete consumer unit included | No | |
| Protective devices included | No |
Frequently Asked Questions
What is the ABB T09 1SKH903009C0001 used for?
The ABB T09 is a neutral and protective earth terminal accessory for compatible ABB Protecta Home consumer units. It is intended to provide the specified terminal arrangement for connecting circuit neutral and protective earth conductors.
What does the number 9 mean in the ABB T09 designation?
The number 9 identifies the manufacturer's T09 terminal arrangement. The precise number of individual neutral and earth conductor connections should be checked against ABB's technical drawing rather than assuming nine connections of each type.
Is the ABB T09 compatible with UK600 enclosures?
The ABB T09 belongs to the Protecta Home product group, not the UK600 enclosure range. Compatibility with UK600 products should not be assumed. Use the terminal accessory specified for the exact enclosure model.
Does the ABB T09 include a complete consumer unit?
No. The ABB T09 is a terminal accessory. It does not include a complete consumer unit, enclosure, circuit breakers, RCDs or other protective devices.
What conductor sizes and electrical ratings does the ABB T09 support?
The conductor cross-section range, terminal tightening torque and applicable electrical ratings must be confirmed from ABB's technical documentation for 1SKH903009C0001. These values should not be inferred from the ratings of the complete Protecta Home consumer unit.
Genuine ABB Terminal Accessories for Professional Electrical Installations
The ABB T09 Neutral and Earth Terminal accessory provides a manufacturer-specific solution for compatible Protecta Home consumer unit assemblies. Its dedicated N/PE application makes it a useful component for qualified electricians and electrical contractors undertaking distribution board installation, maintenance and replacement work.
