Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
RX9360.000 Rittal RilineX Baying set incl. connector for RiLineX board, 3-pole
Rittal RX9360.000 RiLineX 3-pole baying connector set for connecting adjacent RiLineX complete boards rated up to 780A.
£87.40
Why Choose the Rittal RX9360.000 RiLineX Baying Set?
The Rittal RX9360.000 is a RiLineX baying connector set designed for joining two adjacent RiLineX complete boards between bayed VX enclosures without the need for drilling. The kit provides a fast, secure and electrically tested connection, simplifying the expansion of low-voltage power distribution systems whilst maintaining high mechanical strength and electrical performance.
Designed for use with 550A and 800A RiLineX complete boards, the RX9360.000 includes three busbar connectors, a front protection cover and an insulating plate. The assembly is tested to withstand short-circuit currents up to 65kA and is certified to both IEC and UL standards, making it suitable for demanding industrial and commercial switchgear installations.
Supporting applications up to 1000V AC and 1500V DC, the connector set is suitable for modern power distribution systems, renewable energy installations and industrial control panels. Its pre-engineered design significantly reduces installation time whilst ensuring reliable busbar continuity between connected enclosures.
Key Advantages
- Designed for joining adjacent RiLineX complete boards.
- No drilling required between bayed VX enclosures.
- Suitable for 550A and 800A RiLineX systems.
- Short-circuit tested up to 65kA.
- Suitable for applications up to 1000V AC and 1500V DC.
- IEC and UL certified.
- Supplied complete with busbar connectors and protective cover.
Key Features
- Rittal RiLineX accessory.
- Article number RX9360.000.
- 3-pole baying connector set.
- For 30 × 5 mm and 30 × 10 mm busbars.
- Rated current up to 780A.
- IP2XB contact protection.
- 12kV impulse withstand voltage.
- 45kA / 200ms short-time withstand current.
- 52.5kA / 500ms short-time withstand current.
- 103kA impulse withstand current.
- Operating temperature: -5°C to +55°C.
Fast Expansion of RiLineX Power Distribution Systems
The RX9360.000 provides a simple and reliable method of connecting RiLineX complete boards across adjacent VX enclosures. Its pre-engineered design eliminates drilling and reduces assembly time while maintaining full electrical continuity and mechanical integrity.
Designed specifically for Rittal RiLineX systems, the baying connector enables switchboard manufacturers and panel builders to expand busbar assemblies quickly whilst maintaining compliance with IEC and UL requirements.
Typical Applications
- Industrial switchboards.
- Power distribution assemblies.
- RiLineX busbar systems.
- VX enclosure line-ups.
- Motor control centres.
- Renewable energy switchgear.
- Commercial electrical distribution panels.
Technical Specifications
Tick the specs you need, then view products that match.
| Product Series | Rittal RiLineX | |
|---|---|---|
| Rail / Busbar Profile | 30 × 10 mm, 30 × 5 mm | |
| Device Type | Terminal / feed-in | |
| Phase | Three Phase | |
| Poles | 3-pole | |
| Manufacturer | Rittal | |
| Series | RiLineX | |
| Model | RX9360.000 | |
| Product type | Baying connector set | |
| Number of poles | 3 | |
| Suitable for | RiLineX complete boards | |
| Compatible board ratings | 550A / 800A | |
| Maximum rated current | 780A | |
| Busbar size | 30 × 5 mm / 30 × 10 mm | |
| Rated voltage | 1000V AC / 1500V DC | |
| Rated insulation voltage | 1000V AC / 1500V DC | |
| Impulse withstand voltage (Uimp) | 12kV | |
| Impulse withstand current | 103kA / 115.5kA | |
| Short-time withstand current | 45kA (200ms), 52.5kA (500ms) | |
| Protection rating | IP2XB | |
| Overvoltage category | IV | |
| Pollution degree | 3 | |
| Operating temperature | -5°C to +55°C | |
| Humidity | 10–90% non-condensing | |
| Dimensions (W × H × D) | 154 × 240 × 77 mm | |
| Weight | 1.88 kg | |
| Standards | IEC 61439-1/-2, UL 508 | |
| HS Code | 85369010 |
Frequently Asked Questions
What is the Rittal RX9360.000 used for?
It is used to connect two adjacent RiLineX complete boards between bayed VX enclosures without drilling.
Which RiLineX boards is it compatible with?
It is designed for use with Rittal RiLineX complete boards rated at 550A and 800A.
What is included with the baying set?
The kit includes three busbar connectors, one front protection cover and one insulating plate.
What voltage ratings does the RX9360.000 support?
It is suitable for applications up to 1000V AC and 1500V DC.
Does installation require drilling?
No. The RX9360.000 is specifically designed for simple, no-drill installation between bayed VX enclosures.
Trusted by Panel Builders Worldwide
Rittal RiLineX components are trusted by switchboard manufacturers, panel builders and industrial electrical engineers for delivering safe, modular and standards-compliant low-voltage power distribution systems.
