Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CCF544160E0630 ABB IS40463 Switch Disconnector 4P 63A
ABB IS40463 is a 63 A four-pole 230/400 V AC switch disconnector designed for incoming supply switching and load isolation within ABB SMISSLINE TP plug-in distribution systems.
£102.21
Why Choose the ABB IS40463 Switch Disconnector?
The ABB IS40463 is a four-pole 63 A switch disconnector designed for the ABB SMISSLINE TP plug-in distribution system. It provides a convenient means of connecting or isolating individual loads, groups of loads or complete sections of a low-voltage installation while integrating directly with the SMISSLINE socket system.
When installed in a compatible ABB SMISSLINE TP socket system, the IS404 can be used as an incoming supply switch in place of an incoming terminal block for applications up to 63 A. Its clear ON/OFF switching function and visible switching-position indication support straightforward operation and isolation within modular distribution assemblies.
The IS40463 combines a 63 A rated current, four-pole configuration and 230/400 V AC rated voltage with an AC-22A utilisation category. Designed in accordance with EN/IEC 60947-3, it also supports a snap-on auxiliary switch and occupies four modules within the SMISSLINE TP system.
Key Advantages
- Purpose-designed 63 A switch disconnector for ABB SMISSLINE TP systems.
- Four-pole switching for three-phase and neutral distribution circuits.
- Can serve as an incoming supply switch in compatible SMISSLINE socket systems up to 63 A.
- Provides a clear ON/OFF function with visible switching-position indication.
- Enables individual loads, groups of loads or entire installation sections to be connected or isolated.
- Supports a snap-on auxiliary switch for additional signalling or control requirements.
Key Features
- ABB IS404 switch disconnector series.
- 63 A rated current.
- Four-pole configuration.
- 230/400 V AC rated voltage.
- 50 Hz rated frequency.
- 6 kV rated impulse withstand voltage.
- AC-22A utilisation category.
- IP40 degree of protection.
- Mechanical/electrical endurance of 5000 operating cycles.
- Compatible with snap-on auxiliary switching accessories.
- Occupies 4 modules in the SMISSLINE TP system.
Flexible Switching and Isolation for SMISSLINE TP
The ABB IS404 switch disconnector provides a straightforward method of controlling the incoming supply or isolating selected parts of a SMISSLINE TP distribution assembly. Individual loads, groups of loads or entire system sections can be disconnected from or connected to the supply using its clearly defined ON/OFF switching function.
The IS40463 is particularly useful where a 63 A four-pole incoming switch is required within the modular SMISSLINE architecture. Its plug-in system compatibility, clear switching-position indication and provision for an auxiliary switch make it a practical component for commercial and industrial distribution assemblies.
Typical Applications
- ABB SMISSLINE TP distribution boards.
- Incoming supply switching for compatible SMISSLINE socket systems.
- Isolation of individual electrical loads.
- Switching and isolation of groups of circuits or loads.
- Commercial low-voltage distribution assemblies.
- Industrial switchgear and control panels.
Technical Specifications
Tick the specs you need, then view products that match.
| Module Capacity | 4 modules | |
|---|---|---|
| Product Series | ABB SMISSLINE TP | |
| Device Type | Terminal / feed-in | |
| Conductor Size | 0.75–25 mm² | |
| Series | IS404 / SMISSLINE TP | |
| ABB order code | 2CCF544160E0630 | |
| Product type | Switch disconnector | |
| Number of poles | 4 | |
| Rated current | 63 A | |
| Rated voltage | 230/400 V AC | |
| Rated frequency | 50 Hz | |
| Rated impulse withstand voltage | 6 kV | |
| Utilisation category | AC-22A | |
| Connection capacity | 0.75–25 mm² Cu | |
| Terminal tightening torque | 2.8 Nm | |
| Degree of protection | IP40 | |
| Mechanical/electrical endurance | 5000 operating cycles | |
| Ambient operating temperature | −25 to +40 °C | |
| Mounting position | Any | |
| Modules | 4 | |
| Standard | EN/IEC 60947-3 | |
| Pack unit | 1 piece | |
| Product weight | 0.380 kg | |
| EAN | 7612270104390 | |
| System | ABB SMISSLINE TP |
Frequently Asked Questions
What is the ABB IS40463 used for?
The IS40463 is a four-pole switch disconnector used to connect or isolate individual loads, groups of loads or complete sections of compatible ABB SMISSLINE TP distribution systems.
What is the rated current of the ABB IS40463?
The IS40463 has a rated current of 63 A.
Can the IS40463 be used as an incoming supply switch?
Yes. Within a compatible SMISSLINE socket system, the IS404 switch disconnector can be used instead of the incoming terminal block for applications up to 63 A.
How many poles does the ABB IS40463 have?
The IS40463 is a four-pole switch disconnector, making it suitable for simultaneous switching of three-phase and neutral conductors in compatible applications.
What is the ABB order code for the IS40463?
The ABB order code is 2CCF544160E0630, and the product EAN is 7612270104390.
Trusted ABB SMISSLINE Switching Technology
ABB IS404 switch disconnectors provide dependable switching and isolation within the modular SMISSLINE TP architecture, allowing loads and distribution sections to be connected or disconnected through a compact plug-in solution.
