Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009987A0000 ABB PSBV1864 System pro E power Vertical Busbar Fixing Kit 1800 x 600 mm 4P 50 kA
ABB PSBV1864 System pro E power vertical busbar fixing kit designed for compatible 1800 mm high and 600 mm wide four-pole low-voltage switchboard busbar arrangements with a manufacturer-designated 50 kA short-circuit classification.
£1,628.38
Why Choose the ABB PSBV1864 System pro E power Vertical Busbar Fixing Kit?
The ABB PSBV1864 is a dedicated vertical busbar fixing kit for the ABB System pro E power modular low-voltage switchboard range. Designed for compatible 4-pole (4P) busbar arrangements, this mounting accessory supports the mechanical installation and positioning of vertical busbar systems within electrical power distribution assemblies.
Featuring a specified 1800 mm height, 600 mm width and 50 kA short-circuit withstand classification, the PSBV1864 is intended for corresponding System pro E power busbar configurations. Its purpose-designed fixing arrangement helps panel builders establish a structured vertical busbar installation while supporting the mechanical requirements associated with the specified busbar system.
Identified by ABB order code 1STQ009987A0000, the PSBV1864 carries the manufacturer designation KIT VER.BUSBARS FIX.H=1800 W=600 4P 50kA. It is a system-specific accessory for professional electrical panel builders, switchboard manufacturers and contractors constructing compatible industrial and commercial low-voltage power distribution assemblies.
Key Advantages
- Purpose-designed vertical busbar fixing kit for ABB System pro E power switchboards.
- 1800 mm specified height for compatible vertical busbar installation arrangements.
- 600 mm specified width for corresponding modular switchboard configurations.
- 4-pole (4P) configuration for compatible four-pole busbar systems.
- 50 kA manufacturer-designated short-circuit classification for the specified application.
- Supports secure mechanical positioning of vertical busbars within a compatible switchboard assembly.
- Helps maintain the intended busbar arrangement when installed according to ABB assembly instructions.
- Provides a system-specific mounting solution for modular electrical distribution construction.
- Designed for integration with the ABB System pro E power platform.
- Manufacturer-specific model and order code simplify accurate identification, specification and procurement.
Key Features
- ABB System pro E power modular switchboard accessory.
- PSBV1864 manufacturer model designation.
- Vertical busbar fixing kit configuration.
- 1800 mm specified installation height.
- 600 mm specified installation width.
- 4P manufacturer-designated pole configuration.
- 50 kA manufacturer-designated short-circuit withstand classification.
- Designed for mechanical support and fixing of compatible vertical busbar arrangements.
- Intended for modular low-voltage electrical distribution switchboards.
- ABB order code 1STQ009987A0000 for accurate identification and ordering.
Vertical Busbar Fixing for Modular Power Distribution
Vertical busbar systems are important components in modular low-voltage switchboards. They provide conductive distribution paths between compatible sections of the electrical assembly, helping distribute electrical power to associated switching and protective equipment.
The ABB PSBV1864 is specifically identified as a vertical busbar fixing kit. Its role is to provide the mechanical fixing arrangement required for compatible vertical busbar installations rather than to serve as the current-carrying busbar conductor itself.
The specified 1800 mm height and 600 mm width help switchboard designers select the appropriate fixing kit for the intended modular installation. The 4-pole configuration identifies the product's application within a compatible four-pole busbar arrangement.
Correct mechanical support is essential in busbar installations because conductors can experience significant electromagnetic forces during short-circuit conditions. The mounting arrangement must be selected in accordance with the manufacturer's verified system design, including the applicable busbar geometry, support positions and fixing requirements.
The PSBV1864 carries a manufacturer-designated 50 kA short-circuit classification. This value must be interpreted within the applicable ABB System pro E power busbar configuration and verification conditions. It should not be treated as an independent short-circuit rating for every possible installation, nor does it establish the short-circuit withstand capability of an entire switchboard on its own.
Understanding the 50 kA Busbar Fixing Classification
The 50 kA designation is a key selection parameter for the ABB PSBV1864. It identifies the short-circuit classification associated with the manufacturer's specified vertical busbar fixing application.
In a low-voltage switchboard, the ability to withstand short-circuit conditions depends on the complete busbar system. Relevant factors include conductor dimensions, conductor material, support spacing, mounting hardware, mechanical connections and the verified arrangement of the assembled system.
The exact short-circuit test conditions and whether the specified value relates to a particular short-time or peak withstand parameter should be confirmed using the relevant ABB technical documentation. A 50 kA classification alone does not establish a particular withstand duration or peak current value.
The wider ABB System pro E power platform supports modular low-voltage switchboard construction under the applicable requirements of IEC 61439-1 and IEC 61439-2. The PSBV1864 should be installed as part of an appropriately designed and verified assembly, with all electrical and mechanical performance requirements assessed for the completed switchboard.
For correct installation, verify the compatible busbar conductors, support arrangement, fixing positions and associated accessories against the relevant ABB assembly documentation. The exact contents of the fixing kit should be confirmed from the manufacturer's product information rather than assuming that busbar conductors or a particular quantity of fasteners are included.
Typical Applications
- ABB System pro E power modular low-voltage switchboards.
- Compatible vertical busbar mounting and fixing installations.
- Four-pole electrical power distribution busbar arrangements.
- Switchboard configurations requiring an 1800 mm high and 600 mm wide installation arrangement.
- Compatible busbar systems with a manufacturer-designated 50 kA short-circuit classification.
- Industrial main low-voltage distribution switchboards.
- Commercial building electrical power distribution assemblies.
- Electrical panel manufacturing, switchboard assembly and compatible refurbishment projects.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Busbar | |
|---|---|---|
| Series | System pro E power | |
| ABB order code | 1STQ009987A0000 | |
| Product type | Vertical busbar fixing kit | |
| Product category | Low-voltage switchboard busbar mounting accessories | |
| Manufacturer-designated installation height | 1800 mm | |
| Manufacturer-designated installation width | 600 mm | |
| Specified configuration | 1800 × 600 mm (H × W) | |
| Number of poles | 4P (4-pole) | |
| Manufacturer-designated short-circuit classification | 50 kA | |
| Busbar orientation | Vertical | |
| Primary function | Mechanical fixing and support of compatible vertical busbars | |
| Mounting application | Compatible modular low-voltage switchboard busbar assemblies | |
| Compatible system | ABB System pro E power | |
| Application | Low-voltage electrical power distribution switchboards | |
| Manufacturer product group | System Pro E Power | |
| Manufacturer designation | KIT VER.BUSBARS FIX.H=1800 W=600 4P 50kA |
Frequently Asked Questions
What is the ABB PSBV1864 used for?
The ABB PSBV1864 is a vertical busbar fixing kit designed for compatible ABB System pro E power modular low-voltage switchboards. It provides a mechanical mounting solution for specified four-pole vertical busbar arrangements.
What dimensions are specified for the ABB PSBV1864?
The PSBV1864 is designated for a configuration with an 1800 mm height and 600 mm width, corresponding to the manufacturer description KIT VER.BUSBARS FIX.H=1800 W=600 4P 50kA.
What does the 4P designation mean for the ABB PSBV1864?
The 4P designation means that the PSBV1864 is intended for a compatible four-pole vertical busbar arrangement. The specific busbar conductor layout and associated components must be selected according to ABB's applicable assembly documentation.
What does the 50 kA rating mean for the ABB PSBV1864?
The 50 kA designation identifies the manufacturer's short-circuit classification for the specified vertical busbar fixing application. The completed busbar system must follow the relevant ABB verified configuration, and the precise withstand conditions should be checked in the manufacturer's technical documentation.
Does the ABB PSBV1864 include the busbar conductors?
The product is identified as a vertical busbar fixing kit, not as a complete busbar conductor set. The inclusion of any additional components should be verified against the relevant ABB product documentation before ordering.
What is the ABB order code for the PSBV1864?
The ABB manufacturer order code is 1STQ009987A0000, corresponding to the PSBV1864 System pro E power vertical busbar fixing kit for an 1800 × 600 mm (H × W), 4-pole, 50 kA configuration.
Trusted ABB Power Distribution Engineering
ABB System pro E power provides a modular platform for industrial and commercial low-voltage switchboard construction. The PSBV1864 offers a dedicated vertical busbar fixing solution for compatible 1800 mm high, 600 mm wide, four-pole installations with a manufacturer-designated 50 kA short-circuit classification, supporting structured busbar integration and professional power distribution assembly.
