Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007426A0000 ABB PBHB1125 System pro E Power Insulated Busbar Supports 50 mm – Set of 24
ABB PBHB1125 System pro E Power set of 24 insulated busbar supports, each 50 mm long, for compatible low-voltage electrical switchboard busbar assemblies.
£32.98
Why Choose the ABB PBHB1125 System pro E Power Insulated Busbar Supports?
The ABB PBHB1125 is a set of 24 insulated busbar supports designed for use with compatible ABB System pro E Power low-voltage electrical distribution systems. Each support has a specified length of 50 mm, providing a dedicated accessory for supporting and positioning busbars within suitable electrical switchboard assemblies.
As part of the ABB System pro E Power busbar accessory range, the PBHB1125 is intended to assist with the mechanical support and electrical insulation of busbar arrangements. Insulated supports are important components in low-voltage switchboard construction, helping maintain the intended positioning of conductive busbars while providing separation from associated supporting structures.
Supplied as a set of 24 insulated busbar supports, the ABB PBHB1125 offers a practical component selection for electrical panel builders, switchboard manufacturers and industrial electrical engineers. Its 50 mm specified length and manufacturer-specific identification help ensure the correct accessory is selected for compatible System pro E Power configurations. The required busbar dimensions, mounting arrangement and electrical performance must be verified against the relevant ABB technical documentation.
Key Advantages
- ABB System pro E Power busbar accessory for compatible low-voltage switchboard assemblies.
- Set of 24 insulated busbar supports for electrical distribution system construction.
- 50 mm specified support length for accurate component identification.
- Insulated support design for suitable busbar mounting arrangements.
- Helps maintain the intended positioning of busbars within compatible switchboard assemblies.
- Supports mechanical arrangement and electrical separation in appropriately designed busbar systems.
- Suitable for professional electrical panel builders and switchboard manufacturers.
- Designed for integration with compatible ABB System pro E Power components.
- Useful for new electrical distribution assemblies and compatible replacement applications.
- ABB order code 1STQ007426A0000 enables precise product identification and ordering.
Key Features
- ABB PBHB1125 insulated busbar support set.
- Part of the System pro E Power low-voltage distribution range.
- 24 insulated supports in the specified set.
- 50 mm length per support.
- Designed for supporting busbars in compatible electrical assemblies.
- Insulated construction for appropriate busbar support applications.
- Supports organised busbar positioning within electrical switchboards.
- Intended for use with suitably selected busbar and enclosure components.
- Applicable to industrial and commercial low-voltage distribution equipment.
- Manufacturer identification: ABB 1STQ007426A0000.
Reliable Busbar Support for Low-Voltage Electrical Distribution Systems
Low-voltage electrical switchboards use busbar systems to distribute electrical power between incoming supplies, protective devices and outgoing circuits. Correctly selected busbar supports form an important part of these assemblies by helping maintain the intended position and separation of conductive components. The ABB PBHB1125 provides an insulated support accessory for compatible ABB System pro E Power busbar arrangements.
When designing or assembling an electrical distribution system, busbar support selection must account for the manufacturer's specified mounting configuration, busbar dimensions, insulation requirements and mechanical forces that may occur under fault conditions. The PBHB1125 set of 24 supports, each with a specified length of 50 mm, should therefore be selected and installed according to the relevant ABB documentation. The supports do not independently establish a busbar system's rated current, short-circuit withstand capability or insulation performance.
Typical Applications
- ABB System pro E Power low-voltage switchboard assemblies.
- Compatible busbar support and mounting arrangements.
- Industrial electrical power distribution cabinets.
- Commercial low-voltage distribution switchboards.
- Electrical panel building and switchgear manufacturing.
- Busbar positioning within modular electrical enclosures.
- Electrical distribution assemblies incorporating circuit breakers and switching equipment.
- Replacement of matching insulated busbar supports in compatible ABB systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Busbar holder / support | |
|---|---|---|
| Product series | System pro E Power | |
| ABB order code | 1STQ007426A0000 | |
| Product type | Insulated busbar supports | |
| Accessory category | Busbar support accessories | |
| Support construction | Insulated | |
| Specified length | 50 mm | |
| Quantity | 24 supports | |
| Compatible product family | ABB System pro E Power | |
| Primary application | Busbar support within compatible low-voltage switchboard assemblies |
Frequently Asked Questions
What is the ABB PBHB1125 used for?
The ABB PBHB1125 is a set of insulated busbar supports intended to help support and position busbars within compatible ABB System pro E Power low-voltage electrical switchboard assemblies.
How many insulated busbar supports are included in the ABB PBHB1125 set?
The ABB PBHB1125 product specification identifies a quantity of 24 insulated busbar supports.
What is the length of the ABB PBHB1125 busbar supports?
Each ABB PBHB1125 insulated busbar support has a specified length of 50 mm. This dimension should be checked against the required busbar mounting arrangement before ordering.
Why are insulated busbar supports used in electrical switchboards?
Insulated busbar supports help maintain the intended mechanical positioning and electrical separation of conductive busbars within a correctly designed switchboard assembly. The required insulation and mechanical performance must be verified for the complete busbar system.
Which electrical distribution system is compatible with the ABB PBHB1125?
The PBHB1125 belongs to the ABB System pro E Power low-voltage switchboard range. Compatibility with particular busbar dimensions, mounting arrangements and enclosure configurations should be confirmed using the relevant ABB technical documentation.
Trusted by Electrical Panel Builders and Industrial Engineers Worldwide
ABB System pro E Power accessories support professional low-voltage switchboard construction for industrial and commercial electrical distribution. The PBHB1125 set of 24 insulated busbar supports, each measuring 50 mm in length, provides a manufacturer-specified accessory for compatible busbar mounting arrangements, helping electrical panel builders select suitable components for organised and dependable switchboard assembly.
