Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007424A0000 ABB PBSC2000 System pro E Power Shaped Copper Busbar 2000 A 1750 mm
ABB PBSC2000 (1STQ007424A0000) System pro E Power shaped copper busbar with a manufacturer-specified rated current of 2000 A and nominal length of 1750 mm, designed for compatible low-voltage switchboard busbar arrangements and high-current electrical power distribution.
£594.64
Why Choose the ABB PBSC2000 System pro E Power 2000 A Shaped Copper Busbar?
The ABB PBSC2000 (1STQ007424A0000) is a shaped copper busbar designed for use within compatible ABB System pro E Power low-voltage switchboard assemblies. Featuring a manufacturer-specified rated current (In) of 2000 A and a nominal length of 1750 mm, this busbar is intended for professional electrical power distribution applications requiring a high-current conductor within an engineered switchboard system.
As part of the ABB System pro E Power series, the PBSC2000 supports the construction of modular electrical distribution assemblies used in industrial facilities, commercial buildings and electrical infrastructure installations. Its shaped copper construction provides an electrically conductive component intended for integration into compatible busbar arrangements according to ABB's technical and assembly requirements.
The combination of a 2000 A nominal current designation, 1750 mm length and manufacturer-defined shaped profile makes the ABB PBSC2000 a specialised component for low-voltage switchboard manufacturers and qualified electrical installers. Correct selection, positioning, mechanical support and electrical connection are essential to achieving the intended performance of the complete busbar system.
Key Advantages
- Genuine ABB System pro E Power shaped copper busbar for compatible switchboard assemblies.
- 2000 A rated current designation for high-current electrical distribution applications.
- 1750 mm nominal length for matching specified busbar arrangements.
- Copper conductor construction provides high electrical conductivity.
- Shaped busbar profile designed for the intended ABB system configuration.
- Supports professional low-voltage power distribution and switchboard construction.
- Suitable for use in engineered busbar systems where this ABB component is specified.
- Provides a manufacturer-identified component for consistent electrical assembly design.
- Supports modular electrical distribution cabinet construction.
- Suitable for new installations and replacement of matching busbar components.
- Designed for integration with compatible ABB System pro E Power accessories and supporting structures.
Key Features
- ABB System pro E Power series electrical distribution component.
- PBSC2000 manufacturer model designation.
- 1STQ007424A0000 ABB order code.
- Shaped copper busbar construction.
- Rated current (In): 2000 A.
- Nominal busbar length: 1750 mm.
- High-conductivity copper conductor material.
- Manufacturer-defined shaped profile for compatible busbar systems.
- Intended for low-voltage electrical distribution assemblies.
- Suitable for professional switchboard and panel-building applications.
- Designed for integration into compatible ABB System pro E Power cabinet arrangements.
- Supports electrical power distribution within engineered switchboard systems.
- Requires appropriate electrical connections and mechanical support.
- Installation and application subject to ABB's relevant technical documentation.
High-Current Copper Busbar for Low-Voltage Power Distribution
The ABB PBSC2000 shaped copper busbar is intended to form part of a compatible electrical distribution system within the System pro E Power switchboard range. Copper is widely used for electrical busbars because of its high electrical conductivity, making it suitable for carrying substantial currents in appropriately designed electrical assemblies.
The manufacturer's 2000 A rated current designation identifies the busbar's intended current class. However, the permissible continuous current of a completed switchboard depends on the complete busbar arrangement, operating temperature, ventilation, enclosure configuration, electrical connections and applicable ABB design requirements. The nominal current designation should therefore not be treated as an unconditional current-carrying guarantee for every installation.
The 1750 mm nominal length and shaped conductor profile are important selection characteristics when matching the PBSC2000 to an engineered switchboard layout. Appropriate busbar supports, jointing components, clearances and protection against accidental contact must be established using the relevant manufacturer documentation.
For reliable operation, the complete assembly must also be assessed for its required short-circuit withstand performance, thermal behaviour and applicable electrical safety standards. The PBSC2000's individual short-circuit rating, exact cross-sectional dimensions and connection details should be confirmed from ABB's technical documentation rather than inferred from the 2000 A designation alone.
Typical Applications
- ABB System pro E Power low-voltage switchboard assemblies.
- High-current electrical power distribution systems.
- Industrial main electrical distribution boards.
- Commercial building electrical distribution infrastructure.
- Factory and manufacturing facility power distribution.
- Electrical switchgear and distribution cabinet construction.
- Modular busbar arrangements specified for 2000 A applications.
- Electrical distribution systems requiring shaped copper conductors.
- Professional low-voltage panel-building projects.
- Switchboard refurbishment and replacement of matching busbar components.
- OEM electrical distribution assembly manufacturing.
- Engineered electrical installations using compatible ABB busbar systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Busbar | |
|---|---|---|
| Product group | System pro E Power | |
| ABB order code | 1STQ007424A0000 | |
| Manufacturer description | SHAPED COPPER BUSBAR In 2000A L=1750MM | |
| Product type | Shaped copper busbar | |
| Component category | Electrical power distribution busbar | |
| Conductor material | Copper | |
| Busbar profile | Shaped | |
| Rated current (In) | 2000 A | |
| Nominal length | 1750 mm | |
| Compatible product range | ABB System pro E Power | |
| Electrical system | Low-voltage switchboard assembly | |
| Primary function | Electrical current distribution within a compatible busbar system | |
| Application | High-current electrical distribution assemblies | |
| Installation | According to the relevant ABB System pro E Power technical and assembly instructions | |
| Intended users | Qualified electrical installers, switchboard manufacturers and professional panel builders |
Frequently Asked Questions
What is the ABB PBSC2000 1STQ007424A0000 used for?
The ABB PBSC2000 is a shaped copper busbar intended for use in compatible ABB System pro E Power low-voltage switchboard assemblies. It serves as an electrical conductor within an engineered busbar system for distributing power between compatible electrical components.
What is the rated current of the ABB PBSC2000 busbar?
The ABB PBSC2000 has a manufacturer-specified rated current (In) of 2000 A. The permissible current in a completed installation depends on the complete switchboard design, operating conditions and compliance with the relevant ABB technical requirements.
What is the length of the ABB PBSC2000 shaped copper busbar?
The ABB PBSC2000 has a specified nominal length of 1750 mm. This dimension should be checked against the relevant ABB System pro E Power busbar arrangement and assembly documentation before installation.
Why is copper used for the ABB PBSC2000 busbar?
Copper is used in electrical busbars because it offers high electrical conductivity and is suitable for carrying substantial currents when correctly sized and installed. The ABB PBSC2000 uses a shaped copper conductor designed for compatible System pro E Power distribution assemblies.
Can the ABB PBSC2000 be installed in any 2000 A switchboard?
Not necessarily. Although the ABB PBSC2000 is specified for 2000 A, compatibility depends on the particular ABB System pro E Power busbar configuration, supporting components, electrical clearances and complete switchboard design. The relevant ABB technical documentation should be consulted before selecting or installing the busbar.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power components support professional low-voltage switchboard construction and engineered electrical distribution. The PBSC2000 shaped copper busbar combines a 2000 A rated current designation with a 1750 mm nominal length, providing a manufacturer-specified conductor for compatible high-current busbar arrangements within ABB's modular switchboard system.
