Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ005630B0000 ABB System pro E Power Insulated Supports for 24 Busbars W125 mm
ABB 1STQ005630B0000 is an insulated busbar support accessory for compatible System pro E power low-voltage switchboard assemblies, specified for a 24-busbar arrangement with a nominal width of 125 mm.
£142.33
Why Choose the ABB 1STQ005630B0000 Insulated Busbar Supports?
The ABB 1STQ005630B0000 is a dedicated insulated busbar support accessory from the ABB System pro E power range of low-voltage switchgear and electrical distribution components. Identified by the manufacturer designation 24 BUSBARS INSULATED SUPPORTS W=125MM, this product is specified for an arrangement involving 24 busbars and a nominal width of 125 mm.
Busbar support systems are essential components in electrical distribution assemblies, providing mechanical positioning and electrical insulation between conductive busbars and their supporting structures. The ABB 1STQ005630B0000 is intended for compatible System pro E power configurations requiring insulated support components for organised busbar installation.
Designed for professional low-voltage switchboard construction, this ABB accessory supports the integration of busbar arrangements within compatible modular distribution assemblies. Its manufacturer-specific configuration helps electrical panel builders select the appropriate support arrangement for installations where busbar alignment, insulation and mechanical stability are important design considerations.
Key Advantages
- Genuine ABB System pro E power accessory for compatible low-voltage switchgear assemblies.
- Specified for a 24-busbar arrangement according to the manufacturer designation.
- 125 mm nominal width for the designated support configuration.
- Insulated support design for compatible electrical busbar installations.
- Helps maintain the intended positioning and separation of busbars within a switchboard assembly.
- Supports modular electrical distribution system construction.
- Suitable for professional switchgear manufacturers and electrical panel builders.
- Provides a manufacturer-specific component for compatible ABB busbar arrangements.
Key Features
- ABB System pro E power modular low-voltage switchgear series.
- 1STQ005630B0000 ABB manufacturer order code.
- Insulated busbar supports product designation.
- 24 busbars identified in the manufacturer's configuration description.
- 125 mm nominal width designation.
- Designed for compatible busbar support arrangements in electrical switchboards.
- Insulating support function between busbars and associated mounting structures.
- Intended for integration into ABB System pro E power assemblies.
- Mechanical and electrical insulation accessory for professional power distribution installations.
Insulated Busbar Support for Low-Voltage Power Distribution
Busbars are conductive components used to distribute electrical power within low-voltage switchboards, distribution panels and industrial electrical assemblies. Their installation requires suitable support arrangements to maintain the intended positioning, electrical clearances and mechanical stability of the complete system. Insulated busbar supports help separate live conductors from mounting structures while providing mechanical support.
The ABB 1STQ005630B0000 is identified for a 24-busbar configuration with a 125 mm width designation. These characteristics distinguish it from alternative busbar support accessories within the ABB System pro E power range. The designation identifies the intended support arrangement but does not independently establish the quantity of individual pieces supplied in the sales package.
Correct busbar support selection depends on the complete switchboard design, including conductor dimensions, spacing, rated current, short-circuit withstand requirements and mounting arrangements. The support must be installed according to the relevant ABB System pro E power technical documentation. The product's individual insulation properties, material composition and electrical performance ratings should be confirmed using the manufacturer's applicable technical data before installation.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- Industrial electrical power distribution panels.
- Compatible multi-busbar distribution arrangements.
- Low-voltage main distribution boards.
- Commercial and industrial switchgear cabinets.
- Electrical busbar mounting and support installations.
- Professional switchboard manufacturing and electrical panel building projects.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Busbar holder / support | |
|---|---|---|
| Series | System pro E power | |
| Model / order code | 1STQ005630B0000 | |
| Manufacturer part number | 1STQ005630B0000 | |
| Product type | Insulated busbar supports | |
| Manufacturer designation | 24 BUSBARS INSULATED SUPPORTS W=125MM | |
| Busbar arrangement designation | 24 busbars | |
| Nominal width | 125 mm | |
| Support configuration | Insulated | |
| Associated equipment | Electrical busbar distribution systems | |
| System compatibility | ABB System pro E power | |
| Application | Low-voltage electrical distribution and switchgear assemblies | |
| Accessory function | Mechanical support and electrical insulation for compatible busbar arrangements |
Frequently Asked Questions
What is the ABB 1STQ005630B0000 used for?
The ABB 1STQ005630B0000 is an insulated busbar support accessory intended for compatible ABB System pro E power low-voltage switchboard assemblies. It provides a designated support arrangement for busbars used in electrical distribution systems.
What does the 24 busbars designation mean?
The manufacturer's description identifies the accessory as 24 BUSBARS INSULATED SUPPORTS, indicating a support configuration associated with 24 busbars. This designation should not be interpreted as confirmation that the package contains 24 separate support pieces; the supplied quantity should be verified against ABB's product documentation.
What is the specified width of the ABB 1STQ005630B0000?
The manufacturer's designation specifies W=125MM, corresponding to a nominal width of 125 mm. The exact physical dimensions and mounting geometry should be confirmed using ABB technical drawings.
Is the ABB 1STQ005630B0000 compatible with System pro E power switchboards?
Yes. The 1STQ005630B0000 belongs to the ABB System pro E power product group and is intended for compatible busbar arrangements within that modular switchgear system. The exact configuration and installation requirements must be verified against ABB assembly documentation.
Does the ABB 1STQ005630B0000 include the busbars themselves?
The product is designated as insulated busbar supports, not as a complete busbar distribution system. The manufacturer's designation does not confirm that conductive busbars are included. Required conductors, fixing components and other accessories should be checked separately against the applicable ABB bill of materials.
Trusted ABB System pro E power Busbar Accessories
ABB System pro E power provides a modular platform for professional low-voltage electrical distribution and switchgear construction. The 1STQ005630B0000 insulated busbar support accessory offers a manufacturer-specific solution for compatible 24-busbar arrangements with a 125 mm width designation, supporting organised busbar installation and integration into appropriately engineered electrical distribution assemblies.
