Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB UK612E2 2CPX077840R9999 is a single-row, 12-module flush-mounted consumer unit with a RAL 9016 powder-coated steel door, thermoplastic housing, removable DIN rail device carrier and included N/PE screw terminals. Rated IP30, IK07, Class II, 63 A and 400 V AC 50/60 Hz. Overall dimensions 372 x 384 x 97 mm.
£58.04
The ABB UK612E2 Flush-Mounted Consumer Unit (2CPX077840R9999) is a complete, single-row electrical distribution enclosure from the ABB UK600 Enclosures range. Designed to accommodate 12 modular devices, it combines a robust thermoplastic enclosure, removable DIN rail device support, protective internal cover, integrated neutral and protective earth screw terminals, and a powder-coated steel door in RAL 9016 traffic white.
Engineered for professional residential and commercial electrical installations, the UK612E2 provides a compact and organised solution for housing compatible modular circuit protection and control devices. The enclosure offers IP30 protection, Class II double insulation and IK07 mechanical impact resistance, with a rated current of 63 A and rated operational voltage of 400 V AC, 50/60 Hz.
With overall dimensions of 372 mm high, 384 mm wide and 97 mm deep, the ABB UK612E2 is suitable for flush-mounted installation where a neat, low-profile distribution board is required. Its reversible steel door, convenient TIP-in closure, pre-punched cable entry provisions and included N/PE terminal arrangement make it a practical choice for electricians seeking a complete ABB UK600 consumer unit rather than an empty enclosure.
Unlike an empty distribution enclosure, the ABB UK612E2 is supplied with a coordinated set of enclosure components, including the trim frame, solid steel door, internal cover, device carrier and N/PE screw terminal equipment. ABB identifies the included terminal components as ZK507, ZKS6B and ZKS16G.
The included terminal arrangement provides dedicated locations for connecting neutral and protective earth conductors, supporting organised wiring within the distribution board. This makes the UK612E2 especially convenient for projects where a complete enclosure assembly is preferred over purchasing the housing and terminal accessories individually.
The enclosure is designed to accommodate compatible modular protective and control devices, but the 12-module capacity does not mean that circuit breakers, RCDs or other protective devices are supplied. These must be selected separately according to the electrical design and applicable installation requirements.
The UK612E2 is primarily designed for flush mounting in masonry walls, helping create a neat and unobtrusive electrical distribution installation. The overall front dimensions are 372 x 384 mm, while ABB specifies a 355 x 367 x 95 mm flush-mounting niche.
For suitable hollow-wall installations, the UK600 system can be adapted using the appropriate ABB UZ91P4 mounting kit. The published hollow-wall cut-out dimensions for this enclosure are 328 x 340 x 88 mm. Installers should distinguish these dimensions from the larger flush-mounting niche dimensions and confirm the required mounting method before cutting the wall opening.
The enclosure also incorporates pre-punched cable entry provisions at the top, bottom, sides and rear, providing flexibility when routing incoming and outgoing cables. An integrated cable fastening rail helps organise conductors and support suitable cable retention arrangements.
The solid sheet steel door features a powder-coated RAL 9016 traffic white finish, providing a clean appearance suitable for domestic and commercial interiors. The door is fitted with ABB's TIP-in closure mechanism and can be configured for left- or right-hand opening to suit the installation location.
With a 120° opening angle, the door provides practical access to the distribution board during normal operation and maintenance. Behind the door, the plastic internal cover uses 90° press-and-turn fasteners, allowing access by an appropriately qualified person when inspection or installation work is required.
The reversible door arrangement is particularly useful in confined locations, including cupboards, hallways and utility spaces where the preferred opening direction may depend on adjacent walls or fittings.
The ABB UK612E2 is designed for indoor electrical distribution applications and provides IP30 protection against access and solid objects within the scope of that classification. It is not intended to provide protection against water ingress and should not be installed in wet or exposed locations without a suitable additional protective arrangement.
The enclosure features Class II double insulation, IK07 mechanical impact resistance and a specified 850°C glow-wire resistance. It is designed in accordance with EN 60670-24, the standard applicable to enclosures for housing protective devices and other power-dissipating electrical equipment.
Its specified 63 A rated current and 400 V AC, 50/60 Hz rated operational voltage relate to the enclosure system. The completed distribution board must still be designed and assembled using correctly rated protective devices, conductors, terminals and circuit arrangements.
Tick the specs you need, then view products that match.
| IP Rating | IP30 | |
|---|---|---|
| Product Series | ABB UK600 | |
| Device Type | Door / Cover / Partition | |
| Module Capacity | 12 modules | |
| Current | 63 A | |
| Material | Plastic | |
| Product group | UK600 Enclosures | |
| Product series | UK600 | |
| ABB order code | 2CPX077840R9999 | |
| Manufacturer description | UK612E2 Consumer Unit, Flush-Mounted, 12 SU, IP30, Single Door | |
| Product type | Flush-mounted electrical distribution enclosure | |
| Installation location | Indoor | |
| Mounting method | Flush-mounted | |
| Hollow-wall mounting | Possible with the appropriate ABB UZ91P4 conversion kit | |
| Number of rows | 1 | |
| Number of modular spaces | 12 | |
| DIN rail row spacing | 125 mm | |
| Overall height | 372 mm | |
| Overall width | 384 mm | |
| Overall depth | 97 mm | |
| Flush-mounting niche height | 355 mm | |
| Flush-mounting niche width | 367 mm | |
| Flush-mounting niche depth | 95 mm | |
| Hollow-wall cut-out height | 328 mm | |
| Hollow-wall cut-out width | 340 mm | |
| Hollow-wall cut-out depth | 88 mm | |
| Trim frame height | 372 mm | |
| Trim frame width | 384 mm | |
| Trim frame depth | 9 mm | |
| Housing material | Thermoplastic | |
| Door material | Sheet steel | |
| Door finish | Powder-coated | |
| Colour | RAL 9016 traffic white | |
| Door configuration | Single, solid door | |
| Door closure | TIP-in | |
| Door hinge position | Reversible, left or right | |
| Door opening angle | 120° | |
| Internal cover material | Plastic | |
| Internal cover fastening | 90° press-and-turn closure | |
| Degree of protection | IP30 | |
| Protection class | II, double insulated | |
| Mechanical impact resistance | IK07 | |
| Rated current | 63 A | |
| Rated operational voltage | 400 V AC | |
| Rated frequency | 50/60 Hz | |
| Glow-wire resistance | 850°C | |
| Power dissipation at 30 K temperature rise | 31 W | |
| Neutral terminal equipment | Included, screw connection | |
| Protective earth terminal equipment | Included, screw connection | |
| ABB terminal components | ZK507, ZKS6B and ZKS16G | |
| Device carrier | Included | |
| Device support | Removable | |
| Integrated cable fastening rail | Yes | |
| Top cable entry | Pre-punched cable entry slide | |
| Bottom cable entry | Pre-punched cable entry slide | |
| Side cable entry | Pre-punched | |
| Rear cable entry | Pre-punched | |
| Applicable enclosure standard | EN 60670-24 | |
| Additional referenced standard | DIN 43871 | |
| EAN / GTIN | 4011617778400 | |
| Country of origin | Germany | |
| Customs tariff number | 85381000 |
The ABB UK612E2 is a single-row, 12-module flush-mounted consumer unit from the ABB UK600 enclosure range. It includes a thermoplastic housing, RAL 9016 steel door, internal cover, DIN rail device carrier and neutral/protective earth screw terminals.
Yes. The UK612E2 includes N/PE screw terminal equipment. ABB identifies the terminal components as ZK507, ZKS6B and ZKS16G. Circuit breakers, RCDs and other modular protective devices must be selected separately.
The enclosure measures 372 mm high, 384 mm wide and 97 mm deep. The flush-mounting niche measures 355 x 367 x 95 mm, while the specified hollow-wall cut-out measures 328 x 340 x 88 mm.
Yes, provided the correct installation method and accessories are used. ABB specifies the UZ91P4 conversion kit for suitable hollow-wall mounting arrangements. The installer must follow ABB's instructions and use the correct wall cut-out dimensions.
The ABB UK612E2 has an IP30 ingress protection rating, IK07 impact resistance and Class II double-insulated construction. It is rated at 63 A and 400 V AC, 50/60 Hz, with an 850°C glow-wire resistance.
The ABB UK612E2 combines a compact 12-module layout with the practical features expected of a professional flush-mounted distribution enclosure. With included N/PE screw terminals, a removable DIN rail support, reversible RAL 9016 steel door and IP30 Class II construction, it provides a coordinated solution for electricians and panel builders installing reliable indoor electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.