Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZX24 2CPX068538R9999 is an M20 protection hose accessory designed for compatible ABB DESUJ electrical sub-distribution equipment and manufacturer-specified protective connection arrangements.
£69.59
The ABB ZX24 M20 Protection Hose (2CPX068538R9999) is a dedicated protective hose accessory intended for compatible ABB electrical sub-distribution equipment. Part of ABB's DESUJ Sub Distribution product group, the ZX24 provides a manufacturer-specified component for installations requiring an M20 protection hose arrangement within an electrical distribution assembly.
Protective hoses are used in electrical installations where cables, conductors or associated equipment interfaces require an appropriately specified protective covering or routing arrangement. Depending on the installation design, a protective hose can help provide a defined pathway around conductors and reduce exposure to certain mechanical influences. The ABB ZX24 is specifically identified as an M20 protection hose, allowing electrical contractors, panel builders and maintenance engineers to select the correct accessory for compatible ABB equipment.
Identified by ABB order code 2CPX068538R9999, the ZX24 supports accurate procurement for new electrical installations, switchboard maintenance and replacement projects. Its M20 designation is an important selection characteristic, but the exact connection dimensions, hose construction, flexibility, environmental resistance and compatible fittings must be verified against ABB's technical documentation before installation.
Protective hoses are used in electrical equipment installations where conductors, cables or associated connections require a defined protective routing arrangement. Depending on the hose construction and manufacturer's intended application, they may help shield enclosed conductors from contact with surrounding components or certain mechanical influences. However, the degree of protection depends on the specific product, installation method and associated fittings.
The ABB ZX24 is designated as an M20 Protection Hose. In electrical installation equipment, M20 commonly refers to a metric connection or threaded fitting size. For the ZX24, the M20 designation should be matched to the manufacturer's specified connection arrangement. It does not independently establish the hose's internal diameter, external diameter, length or compatibility with every M20 cable gland, conduit fitting or enclosure entry.
When selecting the ZX24, the relevant ABB technical documentation should be checked for the intended hose connection, compatible accessories and installation requirements. The supplied product designation does not confirm whether the hose is flexible or rigid, its material, colour, minimum bending radius, temperature range, ingress protection rating or resistance to chemicals and ultraviolet exposure. These properties should not be assumed without manufacturer confirmation.
The protection hose should also not be treated as an electrical insulating barrier or protective conductor unless its manufacturer-defined function explicitly supports that use. Any required electrical insulation, earthing, mechanical protection and environmental sealing must be provided by appropriately specified components within the completed installation.
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine N | |
|---|---|---|
| Device Type | Enclosure / Cabinet | |
| Product designation | ZX24 | |
| ABB order code | 2CPX068538R9999 | |
| Manufacturer part number (MPN) | 2CPX068538R9999 | |
| Product group | DESUJ Sub Distribution | |
| Product type | Protection hose | |
| Connection designation | M20 | |
| Application | Compatible ABB electrical sub-distribution equipment |
The ABB ZX24 is an M20 protection hose intended for compatible ABB electrical sub-distribution equipment. It is used where the manufacturer's installation design specifies this protective hose accessory for a designated cable, conductor or equipment connection arrangement.
M20 is the connection designation specified for the ABB ZX24. M20 commonly identifies a metric fitting or threaded connection size in electrical installation equipment. The precise connection arrangement and compatible fittings for the ZX24 should be confirmed using ABB's technical documentation.
No universal compatibility should be assumed. Although the ABB ZX24 carries an M20 designation, this does not confirm that it fits every M20 cable gland, conduit connector or enclosure entry. The hose connection design and compatible accessories must be verified against the relevant ABB installation instructions.
The supplied specification identifies the ABB ZX24 as an M20 protection hose but does not confirm its flexibility, material or minimum bending radius. These characteristics should be checked against ABB's product documentation before selecting the hose for an installation involving movement or tight cable routing.
Check the original equipment documentation, component schedule or existing part identification against ABB order code 2CPX068538R9999 and the designation ZX24 M20 Protection Hose. Verify the compatible connection arrangement, required hose length and any associated fittings before ordering or installing the component.
ABB electrical distribution accessories support professional switchboard construction, electrical equipment installation and infrastructure maintenance. The ZX24 M20 Protection Hose, order code 2CPX068538R9999, provides a specifically identified protective hose accessory for compatible ABB DESUJ sub-distribution equipment requiring the manufacturer's designated M20 arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.