Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZW340 (2CPX067940R9999) is a 3-panel-width galvanised steel mounting plate measuring 266 × 688 mm with a 2 mm material thickness, designed for recessed installation in compatible ABB CombiLine M(B)M312 electrical distribution assemblies.
£38.15
The ABB ZW340 Mounting Plate (ABB order code 2CPX067940R9999) is a robust 3-panel-width steel mounting plate designed for equipment installation within compatible ABB STRIEBEL & JOHN electrical distribution assemblies. Part of the ABB CombiLine interior expansion system, the ZW340 provides a practical mounting surface for electrical components requiring recessed installation between the distribution board's mounting frame members.
Manufactured from 2 mm thick galvanised sheet steel, the ZW340 measures 266 × 688 mm (height × width). It is designed for 3-panel-width (3PW / 3FB) distribution arrangements with a nominal mounting height of 2 row units (2 RE), corresponding to the M(B)M312 mounting configuration.
The ZW340 is intended for recessed mounting between the mounting frame members using compatible deep mounting brackets. These additional brackets, such as ABB's ZW59P2 deep mounting angle accessory where specified, must be ordered separately. Supplied as a single mounting plate, the ZW340 offers a reliable mechanical installation platform for electrical panel builders, switchboard manufacturers and electrical contractors working with ABB modular distribution systems.
The ABB ZW340 provides a manufacturer-defined mechanical mounting surface for compatible electrical distribution equipment. Its 3-panel-width configuration allows components to be arranged across a substantial section of an ABB modular distribution assembly, supporting professional switchboard construction and equipment installation.
The plate is manufactured from 2 mm thick galvanised sheet steel. This construction provides mechanical rigidity while the galvanised finish helps protect the steel surface against corrosion in suitable installation environments. The mounting plate is intended for use inside an electrical distribution enclosure rather than as a standalone external enclosure component.
With actual dimensions of 266 mm high and 688 mm wide, the ZW340 corresponds to ABB's three-field, two-row M(B)M312 arrangement. The 300 mm nominal height designation refers to the associated modular system dimension; the physical mounting plate itself is 266 mm high.
The ZW340 belongs to ABB's range of mounting plates for installation between the mounting frame members. This recessed arrangement allows electrical equipment to be positioned within the available installation depth using compatible deep mounting brackets.
ABB specifies that deep mounting angles must be ordered separately. Accessories such as the ZW59P2 are used within compatible recessed mounting arrangements, but the complete component selection must be checked against the distribution board's mounting frame and assembly instructions.
Using a system-specific mounting plate helps panel builders maintain the intended equipment positioning and mechanical layout within the ABB distribution assembly. This is particularly important when integrating components alongside busbar supports, mounting frames, covers and other modular interior expansion accessories.
The galvanised mounting surface can support compatible equipment installation using appropriate fixing methods. Any drilling, fastening or equipment positioning must follow the manufacturer's requirements and preserve the necessary electrical clearances, protective bonding and mechanical integrity of the completed assembly.
The ZW340 is a mechanical accessory and does not itself provide electrical insulation, switching, overload protection or short-circuit protection. The suitability of mounted electrical equipment depends on the complete assembly design, including the enclosure, mounting hardware, protective devices and applicable electrical installation standards.
Supplied as one mounting plate, the ZW340 is suitable for new distribution panel construction, extensions to compatible assemblies and replacement of matching mounting plates during maintenance or refurbishment work.
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine | |
|---|---|---|
| Device Type | Mounting / Expansion Module |
The ABB ZW340 is a 3-panel-width galvanised steel mounting plate used to support compatible electrical equipment within ABB STRIEBEL & JOHN modular distribution assemblies.
The ABB manufacturer order code is 2CPX067940R9999, and the product designation is ZW340.
The ZW340 measures 266 mm high × 688 mm wide and is manufactured from 2 mm thick sheet steel.
3PW means three panel widths. The ZW340 is designed for a three-field ABB distribution system arrangement, providing a nominal mounting width corresponding to the manufacturer's modular panel configuration.
The ZW340 is designed for a 2 RE / nominal 300 mm system height. Its actual physical plate height is 266 mm.
The ZW340 is manufactured from 2 mm thick sheet steel with a galvanised surface finish.
Yes. The ZW340 has a galvanised steel surface to provide corrosion protection for suitable electrical distribution installation environments.
The ZW340 is designed for the ABB M(B)M312 mounting configuration, corresponding to a three-field, two-row modular distribution arrangement.
Yes. ABB specifies the ZW340 for recessed mounting between mounting frame members, with suitable deep mounting brackets ordered separately.
The ZW340 is supplied as one mounting plate. Deep mounting angles and other required assembly hardware must be selected separately according to the compatible ABB mounting system.
Yes. The ZW340 belongs to the ABB STRIEBEL & JOHN CombiLine interior expansion system for compatible modular electrical distribution assemblies.
All three are mounting plates for the same nominal 300 mm system height. The ZW338 is 1PW and measures 266 × 188 mm, the ZW339 is 2PW and measures 266 × 438 mm, and the ZW340 is 3PW and measures 266 × 688 mm.
The ZW340 is a 3PW mounting plate measuring 266 × 688 mm for a 2 RE configuration, while the ZW343 is a taller 3PW mounting plate measuring 416 × 688 mm for a 3 RE configuration.
The ABB ZW340 is supplied as one mounting plate per manufacturer supply unit.
ABB lists a packaging gross weight of 3.1 kg for the ZW340 mounting plate.
The manufacturer's product information identifies Germany as the country of origin for the ZW340.
No. The ZW340 is a mechanical equipment mounting plate. It does not provide electrical switching, insulation, overload protection or short-circuit protection independently of the complete distribution assembly.
The ZW340 is suitable for electrical panel builders, switchboard manufacturers, electrical contractors and maintenance engineers working with compatible ABB modular distribution systems.
ABB STRIEBEL & JOHN mounting plates provide system-specific mechanical support for professional electrical distribution panel construction. With its 3-panel-width configuration, 266 × 688 mm dimensions, 2 mm galvanised steel construction and compatibility with M(B)M312 recessed mounting arrangements, the ZW340 is a practical choice for switchboard manufacturers, electrical contractors and industrial panel builders working with ABB CombiLine systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.