Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AG173 two-position NH1 equipment cover, measuring 250 mm wide by 750 mm high with a 1PW configuration, designed for compatible ABB DESUJ electrical sub-distribution assemblies.
£77.15
The ABB AG173 is a purpose-designed NH1 fuse equipment cover for electrical distribution assemblies, intended for a configuration of two NH size 1 fuse equipment positions within compatible low-voltage distribution panels. As part of ABB's DESUJ Sub Distribution product range, this cover supports the construction, organisation and maintenance of electrical distribution systems incorporating NH fuse equipment.
The AG173 features a 2 × NH1 cover configuration, providing a dedicated panel covering arrangement for two NH1 equipment positions. Its design helps electrical panel builders organise fuse equipment within compatible distribution assemblies while maintaining a neat and consistent front-facing installation. The cover is an assembly accessory rather than a fuse holder, fuse-switch disconnector or electrical protective device.
With nominal dimensions of 250 mm wide × 750 mm high and a 1PW panel-width configuration, the ABB AG173 is intended for compatible ABB sub-distribution arrangements requiring two NH1 equipment positions. Identified by ABB order code 2CPX062899R9999, it provides a practical solution for electrical distribution board construction, equipment integration, replacement and refurbishment projects.
NH fuse systems are widely used in low-voltage electrical distribution installations where appropriately rated fuse links and associated equipment provide overcurrent protection and, where suitable switching devices are installed, circuit isolation. NH size 1 identifies a standardised fuse-link size used with compatible fuse bases and fuse-switch disconnectors. Purpose-designed equipment covers help provide an organised front-facing arrangement around these components.
The ABB AG173 is specifically identified for a two-position NH1 configuration, with nominal dimensions of 250 mm × 750 mm and a 1PW panel-width designation. These characteristics allow electrical panel builders to identify the corresponding cover for compatible ABB sub-distribution arrangements incorporating NH1 fuse equipment.
Correct selection of the cover and associated fuse equipment is essential for a safe and functional installation. The AG173 itself does not provide overcurrent protection or electrical isolation; these functions depend on separately installed protective and switching devices. The completed assembly's degree of protection, electrical clearances, accessibility and operational safety depend on the complete enclosure design, equipment compatibility and correct installation.
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062899R9999 | |
| Product type | NH1 equipment cover | |
| Cover configuration | 2 × NH1 | |
| Compatible fuse equipment size | NH1 (NH size 1) | |
| Equipment positions | 2 | |
| Nominal width | 250 mm | |
| Nominal height | 750 mm | |
| Panel-width designation | 1PW | |
| Application | Electrical sub-distribution assemblies incorporating NH1 fuse equipment | |
| Installation type | Compatible distribution panel assembly | |
| Component function | Covering and finishing designated NH1 equipment sections |
The ABB AG173 is a cover designed for compatible electrical sub-distribution assemblies incorporating two NH size 1 fuse equipment positions. It provides a dedicated covering arrangement for the corresponding distribution panel section.
The ABB AG173 has nominal dimensions of 250 mm wide × 750 mm high and is specified for a 1PW panel-width configuration.
2 × NH1 indicates that the cover is intended for a configuration of two NH size 1 fuse equipment positions within a compatible electrical distribution assembly. It does not mean that two fuse links or fuse-switch disconnectors are supplied with the cover.
1PW identifies the single-panel-width configuration associated with the AG173 within the compatible ABB distribution assembly system. This designation should be matched to the intended panel arrangement before installation.
No. The AG173 is a distribution panel cover and does not itself provide overcurrent protection or electrical isolation. These functions depend on separately installed NH fuse links, fuse bases or fuse-switching devices and the complete electrical installation.
The ABB manufacturer order code is 2CPX062899R9999. This identifier can be used when specifying, ordering or replacing the AG173 NH1 equipment cover.
The AG173 is intended for compatible ABB sub-distribution assemblies. The panel dimensions, 1PW configuration, NH1 equipment arrangement, mounting requirements and associated system components should be checked before installation.
ABB electrical distribution components support organised and dependable panel construction in commercial and industrial installations. The AG173 provides a dedicated covering solution for compatible sub-distribution assemblies requiring two NH1 equipment positions within a 250 mm × 750 mm, 1PW panel arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.