Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AG75 is a 500 x 300 mm electrical distribution board cover with a 2PW configuration, designated for compatible ABB sub-distribution assemblies incorporating a 4 x NH00 equipment arrangement.
£62.39
The ABB AG75 is a purpose-designed 4 × NH00 cover for electrical distribution boards, intended for use with compatible low-voltage electrical distribution assemblies incorporating NH00 equipment. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this accessory provides a dedicated covering solution for professional electrical panel builders, electrical contractors and switchgear manufacturers.
Featuring nominal dimensions of 500 mm wide × 300 mm high, the AG75 is specified for a 2PW cover configuration and carries the designation 4 × NH00. This identifies the cover's intended equipment arrangement, making it relevant to compatible distribution board sections designed around four NH00 positions. Its wide rectangular format distinguishes it from taller, narrower NH00 cover arrangements.
Identified by ABB order code 2CPX062876R9999, the AG75 is a dedicated accessory for compatible ABB sub-distribution equipment. Its combination of a 500 mm width, 300 mm height, 2PW configuration and 4 × NH00 designation supports accurate product selection for new installations, electrical distribution board assembly, refurbishment and replacement work.
NH fuse equipment is commonly used in low-voltage electrical distribution systems where suitable fuse-based protection and switching arrangements are required. Distribution board covers associated with NH equipment must be selected to suit the intended assembly layout, equipment dimensions and access requirements. Correct cover selection helps ensure that the completed electrical panel follows its specified mechanical arrangement.
The ABB AG75 is designated as a 4 × NH00 cover, with nominal dimensions of 500 × 300 mm and a 2PW configuration. This makes it relevant to compatible ABB distribution board sections intended for four NH00 equipment positions. The designation describes the intended cover arrangement; it does not independently confirm compatibility with every NH00 fuse switch disconnector, fuse base or other NH00 device.
The AG75 features a wider, lower-profile rectangular format than the ABB AG73, which is designated as a 4 × NH00 cover measuring 250 × 600 mm with a 1PW configuration. Although both products reference four NH00 positions, their different dimensions and cover configurations mean they should not be treated as interchangeable without confirmation from ABB technical documentation.
Unlike a general-purpose solid cover, the AG75 is identified specifically for an NH00 equipment arrangement. This distinction matters when selecting distribution board accessories because the cover must correspond with the installed devices and their required operating or maintenance access. The precise aperture geometry, equipment spacing, mounting details and compatible ABB equipment references should be verified before installation.
As part of the ABB DESUJ Sub Distribution accessory range, the AG75 supports professional electrical panel construction, switchgear assembly and maintenance. Before installation, verify the 500 × 300 mm dimensions, 2PW configuration, 4 × NH00 equipment arrangement and required fixing hardware against ABB technical documentation. The AG75 is a cover accessory, not an NH fuse, fuse holder or standalone electrical protective device. Any required ingress protection rating, protection against contact with live parts and electrical assembly compliance must be established for the complete installed system.
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062876R9999 | |
| Product type | NH00 equipment cover | |
| Accessory category | Electrical distribution board cover | |
| Equipment designation | 4 × NH00 | |
| NH equipment size | NH00 | |
| Designated equipment positions | 4 | |
| Nominal width | 500 mm | |
| Nominal height | 300 mm | |
| Cover dimensions (W × H) | 500 × 300 mm | |
| Cover configuration | 2PW | |
| Cover format | Rectangular | |
| Primary function | Covering compatible electrical distribution board sections incorporating the specified 4 × NH00 arrangement | |
| Intended equipment | Compatible ABB sub-distribution assemblies with NH00 equipment | |
| Application | Low-voltage electrical distribution systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AG75 4 × NH00 Cover 500w × 300h 2PW |
The ABB AG75 is a distribution board cover intended for compatible ABB low-voltage electrical assemblies incorporating a 4 × NH00 equipment arrangement. It provides a dedicated covering component for the corresponding electrical panel section.
The ABB AG75 has nominal dimensions of 500 mm wide × 300 mm high. It is specified for a 2PW cover configuration within compatible ABB sub-distribution equipment.
The 4 × NH00 designation identifies a cover intended for an arrangement of four NH00 equipment positions. NH00 refers to an NH fuse equipment size. The exact compatible devices, opening positions and mounting arrangement must be verified against the relevant ABB documentation.
Both covers are designated for 4 × NH00 arrangements, but their dimensions and configurations differ. The ABB AG75 measures 500 × 300 mm and has a 2PW configuration, while the ABB AG73 measures 250 × 600 mm and has a 1PW configuration. They should not be considered interchangeable without confirmation of compatibility.
The ABB order code is 2CPX062876R9999. Before installation, confirm the 500 × 300 mm dimensions, 2PW configuration, compatibility with the intended four NH00 equipment positions, aperture alignment, mounting details and required fixing hardware. Installation should follow the applicable ABB technical instructions.
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AG75 4 × NH00 Cover 500 × 300 mm 2PW provides a dedicated cover for compatible NH00 distribution board arrangements, helping electrical contractors and panel builders achieve organised equipment coverage, a consistent panel layout and appropriate mechanical integration within low-voltage electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.