Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CPX062815R9999 ABB AG23 Solid Cover 500 x 450 mm 2PW
ABB AG23 is a 500 x 450 mm solid electrical distribution cover with a 2PW configuration, designed for compatible ABB low-voltage distribution boards and switchgear assemblies requiring a continuous cover surface.
£67.00
Why Choose the ABB AG23 Solid Cover 500 × 450 mm 2PW?
The ABB AG23 is a purpose-designed solid cover for electrical distribution boards, intended for use with compatible low-voltage electrical distribution assemblies. Manufactured by ABB and belonging to the DESUJ Sub Distribution product group, this cover provides a dedicated solution for professional electrical panel construction, switchgear assembly and distribution board installations requiring a solid cover section.
Featuring nominal dimensions of 500 mm wide × 450 mm high, the AG23 is specified for a 2PW cover configuration. Its solid design provides an uninterrupted covering surface for compatible distribution board sections, making it suitable for applications where a blank cover is required rather than a slotted cover with openings for device operation.
Identified by ABB order code 2CPX062815R9999, the AG23 is a practical accessory for electrical contractors, panel builders and maintenance engineers working with compatible ABB sub-distribution equipment. Its 500 × 450 mm format makes it relevant to new installations, distribution board assembly, equipment refurbishment and replacement applications where this specific ABB cover is required.
Key Advantages
- Purpose-designed solid cover for compatible electrical distribution assemblies.
- 500 mm nominal width for the specified ABB cover arrangement.
- 450 mm nominal height for compatible distribution board sections.
- 2PW configuration for the corresponding ABB distribution cover system.
- Solid cover design provides a continuous surface without designated device operating slots.
- Helps separate covered electrical equipment from surrounding panel areas when correctly installed.
- Supports a neat, consistent and organised electrical distribution board layout.
- Designed for integration with compatible ABB sub-distribution equipment.
- Suitable for professional panel construction, maintenance and refurbishment.
- Genuine ABB product identification supports accurate accessory selection and replacement.
Key Features
- ABB AG23 solid cover for electrical distribution equipment.
- ABB order code 2CPX062815R9999.
- DESUJ Sub Distribution product group.
- 500 mm nominal cover width.
- 450 mm nominal cover height.
- 500 × 450 mm nominal cover dimensions (W × H).
- 2PW cover configuration.
- Solid, uninterrupted cover format.
- Designed for compatible ABB low-voltage electrical distribution assemblies.
- Suitable for covering designated blank sections or compatible equipment compartments.
- Supports structured electrical panel assembly and equipment coverage.
- Suitable for replacement applications where the AG23 is specified.
Reliable Solid Covering for Electrical Distribution Systems
Solid covers are important components in the construction of low-voltage electrical distribution boards. They provide a continuous covering surface for compatible equipment sections, helping separate internal electrical components from surrounding areas. Correctly selected covers also contribute to the intended appearance, layout and mechanical arrangement of a completed electrical panel.
The ABB AG23 combines a 500 mm width with a 450 mm height and is designated for a 2PW cover arrangement. Its rectangular format is intended for compatible distribution board sections requiring a solid cover. Unlike slotted covers designed to accommodate device operating openings, the AG23 provides a continuous cover surface for the specified installation.
As part of the ABB DESUJ Sub Distribution accessory range, the AG23 supports professional panel-building, switchgear assembly and electrical maintenance. Selecting the correct solid cover helps maintain the intended equipment arrangement and provides a consistent finish across compatible distribution board sections. The AG23 may be used in new electrical installations or as a replacement where the existing equipment specification identifies this model.
Before installation, verify the 500 × 450 mm dimensions, 2PW configuration, mounting positions, fixing hardware and compatibility with the intended ABB distribution board against the manufacturer's technical documentation. The AG23 is a mechanical cover accessory rather than a standalone electrical protective device. Any required ingress protection rating or protection against contact with live parts must be established for the complete installed assembly.
Typical Applications
- Compatible ABB low-voltage electrical distribution boards.
- Electrical distribution assemblies requiring a 2PW solid cover.
- Covering designated blank sections within compatible electrical panels.
- Commercial building electrical distribution installations.
- Industrial switchgear and power distribution panels.
- Modular electrical distribution equipment assembly.
- Professional electrical panel manufacturing and installation.
- Distribution board refurbishment and solid cover replacement.
- OEM electrical enclosure and switchgear construction.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Door / Cover / Partition | |
|---|---|---|
| Product Series | S&J CombiLine N | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX062815R9999 | |
| Product type | Solid cover | |
| Accessory category | Electrical distribution board cover | |
| Cover design | Solid | |
| Nominal width | 500 mm | |
| Nominal height | 450 mm | |
| Cover dimensions (W × H) | 500 × 450 mm | |
| Cover configuration | 2PW | |
| Cover format | Rectangular | |
| Primary function | Covering compatible electrical distribution board sections | |
| Intended equipment | Compatible ABB sub-distribution assemblies | |
| Application | Low-voltage electrical distribution systems | |
| Installation environment | Compatible electrical distribution boards and switchgear enclosures | |
| Product designation | AG23 Solid Cover 500w × 450h 2PW |
Frequently Asked Questions
What is the ABB AG23 solid cover used for?
The ABB AG23 is a solid cover designed for compatible low-voltage electrical distribution assemblies. It provides a continuous covering surface for designated sections of electrical distribution boards and switchgear equipment.
What are the dimensions of the ABB AG23 cover?
The ABB AG23 has nominal dimensions of 500 mm wide × 450 mm high. It is specified for a 2PW cover configuration within compatible ABB distribution equipment.
What is the difference between the ABB AG23 solid cover and a slotted cover?
The ABB AG23 has a solid covering surface without designated device operating slots. A slotted cover incorporates openings intended to accommodate compatible equipment arrangements. The correct cover type depends on the distribution board configuration and the accessibility requirements of the installed devices.
What is the ABB order code for the AG23 solid cover?
The manufacturer's order code is 2CPX062815R9999, and the product model is AG23. These identifiers can be used when selecting, ordering or replacing the correct ABB distribution board cover.
What should be checked before installing the ABB AG23?
Before installation, verify the 500 × 450 mm cover dimensions, 2PW configuration, compatibility with the intended ABB distribution assembly, mounting positions and fixing hardware. Installation should follow the applicable ABB instructions, including any requirements for electrical clearances and protection against contact with live parts.
Trusted by Electrical Panel Builders Worldwide
ABB electrical distribution accessories support professional switchgear construction and electrical panel assembly. The ABB AG23 Solid Cover 500 × 450 mm 2PW provides a dedicated solid cover for compatible distribution board sections, helping electrical contractors and panel builders achieve organised equipment coverage, a consistent panel finish and reliable mechanical integration within low-voltage electrical distribution systems.
