Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZB32P20 (2CPX062651R9999) pack of 20 M4.8 x 9.5 mm tapping screws for fastening compatible top-hat DIN rails in ABB STRIEBEL & JOHN electrical distribution systems. Steel construction, electrolytically galvanised zinc finish, rounded lens-style head and Torx T25 hexalobular drive with additional straight slot.
£5.46
The ABB ZB32P20 (2CPX062651R9999) is a pack of 20 M4.8 × 9.5 mm tapping screws designed for fastening DIN rails and compatible internal mounting components within electrical distribution boards. Manufactured for the ABB STRIEBEL & JOHN interior expansion system, these screws provide a practical fastening solution for electrical panel assembly, installation and maintenance.
Each screw features a rounded lens-style head with a combined Torx T25 hexalobular recess and straight slot. This dual-drive arrangement provides flexibility during installation, allowing the use of an appropriate T25 driver or compatible slotted screwdriver.
The M4.8 × 9.5 mm size makes the ZB32P20 suitable for specified mounting applications where a compact tapping screw is required. Its steel construction and electrolytically galvanised zinc finish provide a durable fastening component for appropriately specified indoor electrical enclosures.
Supplied as a convenient 20-piece pack, the ABB ZB32P20 is particularly useful for electricians, panel builders, switchboard manufacturers and maintenance engineers working with compatible ABB distribution board systems. The screws are listed in ABB's catalogue as attachment material for interior expansion systems, including fastening applications involving top-hat DIN rails.
The ABB ZB32P20 tapping screws are designed for fastening top-hat profile rails within compatible ABB electrical distribution systems. DIN rails provide a standardised mounting platform for modular electrical components such as circuit breakers, terminal blocks, contactors and control devices. Correct rail fastening is essential for the mechanical stability of the completed assembly.
Each screw features a 4.8 mm nominal diameter and 9.5 mm length. This compact format is intended for compatible mounting points where a tapping screw of the specified dimensions is required. Installers should verify the thickness of the mounting material, the fixing hole dimensions and the available clearance before installation.
The combined Torx T25 and straight-slot head provides flexibility when assembling or servicing electrical distribution boards. A correctly sized T25 driver offers positive engagement with the hexalobular recess, helping the installer apply controlled tightening force. The additional straight slot provides another engagement option when a suitable slotted tool is used.
The rounded lens-style head provides a fastening surface suitable for the intended mounting arrangement. Unlike a countersunk screw, the head is not designed to sit flush inside a countersunk recess. The correct screw head type must be selected according to the mounting component and ABB's assembly instructions.
The screws are manufactured from steel with an electrolytically galvanised zinc finish. This coating provides surface protection for normal indoor electrical enclosure applications. It should not be assumed to provide the corrosion resistance required for continuously wet, chemically aggressive or marine environments without additional assessment.
Supplied in a 20-piece pack, the ZB32P20 offers a practical quantity for distribution board installation, modifications and routine maintenance. It is especially useful where multiple DIN rail fixing points must be completed using a consistent manufacturer-specified screw type.
The ABB ZB32P20 should be used only where an M4.8 × 9.5 mm tapping screw is specified or confirmed as compatible with the mounting arrangement. Screw diameter and length alone do not establish suitability for every DIN rail, enclosure or fixing hole.
Before fitting the screws, installers should check that the mounting surface is suitable for the tapping screw and that sufficient material thickness is available for secure engagement. The selected screw must not interfere with electrical components, conductors or other equipment behind the mounting surface.
A Torx T25 screwdriver or bit is recommended for engaging the hexalobular recess. The correct tightening method and torque should be taken from the applicable ABB installation instructions. Excessive tightening can damage the screw head, mounting hole or attached component.
When used to secure a DIN rail, the mounting arrangement must provide adequate mechanical support for the installed electrical devices and associated wiring. The quantity and spacing of fixing points should follow the distribution board manufacturer's assembly requirements.
Electrical installation work should be carried out by competent personnel with the equipment safely isolated. Replacement screws should match the original specified fastener type, dimensions and installation requirements.
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine | |
|---|---|---|
| Device Type | Accessory |
The ABB ZB32P20 is a pack of tapping screws designed primarily for fastening compatible top-hat DIN rails and mounting components within ABB STRIEBEL & JOHN electrical distribution board systems.
Each ZB32P20 pack contains 20 tapping screws.
The screws have a nominal size of M4.8 × 9.5 mm, corresponding to a 4.8 mm nominal diameter and 9.5 mm length.
The screws feature a Torx T25 hexalobular recess with an additional straight slot. A correctly sized T25 screwdriver or bit is suitable for the Torx drive.
Yes. ABB classifies the ZB32P20 as a tapping screw intended for suitable mounting applications. The fixing hole and mounting material must be compatible with the screw design.
The screws are manufactured from steel and have an electrolytically galvanised zinc surface finish.
Yes. ABB lists the ZB32P20 as a fastening screw for top-hat profile DIN rails in compatible electrical distribution board assemblies. The exact mounting arrangement must be checked before installation.
The ZB32P20 features a rounded lens-style head with a Torx T25 hexalobular recess and an additional straight slot.
Both contain M4.8 × 9.5 mm T25 tapping screws. The ZB32P20 contains 20 pieces, while the ZB32P4 contains four pieces.
Yes. The ABB ZB32P500, order code 2CPX062652R9999, provides 500 screws of the same nominal M4.8 × 9.5 mm specification.
The ZB32P20 contains M4.8 × 9.5 mm screws, whereas the ZB27P20 contains M4.8 × 11.5 mm screws. The correct length depends on the mounting arrangement specified by ABB.
The zinc-plated steel construction is intended for compatible mounting applications. Outdoor suitability depends on the enclosure environment, moisture exposure and corrosion requirements. The screws should not automatically be treated as stainless steel or marine-grade fasteners.
The ABB order code and manufacturer product ID are 2CPX062651R9999. The product model is ZB32P20, and it belongs to the DESUJ Sub Distribution product group.
The EAN / GTIN for the ABB ZB32P20 20-piece screw pack is 4011617626510.
The ZB32P20 is supplied as a 20-piece tapping screw pack. Nuts and washers are not specified as included accessories.
The ABB ZB32P20 provides 20 M4.8 × 9.5 mm steel tapping screws with a Torx T25 and straight-slot head, designed for fastening compatible DIN rails in ABB STRIEBEL & JOHN electrical distribution systems. With zinc-plated construction, a compact screw profile and an identifiable ABB order code, it is a practical fastening accessory for professional panel assembly and electrical maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.