Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ZK79P5 (2CPX062631R9999) is a pack of 5 connecting terminals for compatible 5 mm thick copper busbars, supporting conductor cross-sections from 1.5 to 16 mm². Part of the ABB CombiLine N interior expansion system, each terminal features a retaining spring for latching onto the copper rail.
£14.64
The ABB ZK79P5 Connecting Terminal is a professional electrical connection accessory designed for attaching conductors to compatible copper busbars in low-voltage distribution assemblies. Supplied as a pack of 5 connecting terminals, the ZK79P5 supports conductor cross-sections from 1.5 mm² to 16 mm² and is intended for copper rails with a 5 mm thickness.
Identified by ABB order code 2CPX062631R9999, this product belongs to the ABB DESUJ Sub Distribution product group and is included in the ABB Striebel & John CombiLine N interior expansion system. Its design incorporates a retaining spring, allowing the connecting terminal to latch onto a compatible copper rail and provide a dedicated connection point for the specified conductor range.
The ABB ZK79P5 is particularly useful for electrical contractors, switchboard manufacturers and maintenance engineers working with copper busbar distribution systems. The five-piece packaging provides a convenient quantity for installations requiring several matching connection points, while the defined conductor range helps installers select the appropriate terminal for their electrical assembly.
Copper busbar systems are widely used in electrical distribution assemblies to provide organised current distribution between electrical devices and circuits. Correctly selected connecting terminals allow conductors to be attached to the busbar system while maintaining the intended electrical and mechanical connection arrangement.
The ABB ZK79P5 is designed specifically for 5 mm thick copper rails and a conductor connection range of 1.5–16 mm². Its retaining spring allows the terminal to latch onto the compatible rail, providing a practical method of positioning the connecting terminal within the intended ABB busbar arrangement.
The defined connection range is an important selection characteristic. Conductors smaller than 1.5 mm² or larger than 16 mm² fall outside the specified range and should not be used without explicit manufacturer approval. Installers must also verify the permitted conductor construction, connection method, tightening requirements and electrical rating using the applicable ABB technical instructions.
The ABB ZK79P5 forms part of the CombiLine N interior expansion system, a range of accessories used in electrical distribution board construction. Within suitable copper busbar configurations, the connecting terminal provides a dedicated point for attaching conductors to the distribution rail.
The latching design with retaining spring is intended to simplify positioning on the specified copper rail. This can be particularly useful when assembling multiple busbar connections or replacing matching terminals during electrical distribution board maintenance.
For correct installation, the copper rail dimensions, conductor cross-section, conductor preparation and complete electrical assembly must match the relevant ABB documentation. The terminal's conductor size range alone does not establish the permissible operating current or short-circuit rating of the completed connection.
The ZK79 connecting terminal is available in several manufacturer-listed packaging quantities, allowing installers to select a suitable quantity for their project:
These ZK79 variants share the manufacturer-listed 1.5–16 mm² conductor range and 5 mm copper rail compatibility. The principal distinction between these listed variants is the supplied quantity.
Tick the specs you need, then view products that match.
| Device Type | Busbar / Terminal | |
|---|---|---|
| Product Series | S&J CombiLine | |
| Brand range | ABB Striebel & John | |
| Product group | DESUJ Sub Distribution | |
| Product family | CombiLine N | |
| ABB order code | 2CPX062631R9999 | |
| Product type | Connecting terminal | |
| Accessory category | Copper busbar connection accessories | |
| Minimum connection cross-section | 1.5 mm² | |
| Maximum connection cross-section | 16 mm² | |
| Connection cross-section range | 1.5–16 mm² | |
| Compatible copper rail dimension | 5 mm thickness | |
| Mounting arrangement | Latching onto compatible copper rails | |
| Retaining mechanism | Retaining spring | |
| Intended application | Conductor connection to compatible copper busbars | |
| Pack quantity | 5 pieces | |
| Packaging unit | 1 pack containing 5 connecting terminals | |
| Related single-piece model | ZK79 | |
| Related four-piece model | ZK79P4 | |
| Related fifty-piece model | ZK79P50 |
The ABB ZK79P5 is a connecting terminal designed to attach compatible electrical conductors to 5 mm thick copper busbars within suitable electrical distribution assemblies.
The ABB ZK79P5 is supplied as a pack of 5 connecting terminals for compatible copper busbar installations.
The ABB ZK79P5 supports a manufacturer-listed conductor connection cross-section range of 1.5–16 mm².
The ABB ZK79P5 is designed for compatible copper busbars with a 5 mm rail thickness.
Yes. The ABB ZK79P5 is a latching connecting terminal with a retaining spring for attachment to compatible copper rails.
The ABB ZK79P5 is designed to latch onto a compatible 5 mm copper rail using its retaining spring. The conductor connection must then be completed according to the applicable ABB installation instructions.
Yes. ABB lists the ZK79P5 within its CombiLine N interior expansion system as a connecting terminal for copper rails.
No. The manufacturer's specified connection range is 1.5–16 mm². Conductors outside this range require a suitably rated alternative terminal.
The ABB ZK79P5 supports 1.5–16 mm² conductors, while the ABB ZK81P5 supports 4–35 mm² conductors. Both are listed for compatible 5 mm copper rails and supplied in packs of 5.
The manufacturer's order code is 2CPX062631R9999, corresponding to the ABB ZK79P5 1.5–16 mm² connecting terminals supplied as a pack of 5 pieces.
ABB Striebel & John electrical distribution accessories support professional switchboard construction and organised copper busbar connections. The ABB ZK79P5 combines a 1.5–16 mm² conductor connection range, compatibility with 5 mm copper rails and a retaining spring latching design, providing a practical connecting terminal solution for electrical contractors, panel builders and maintenance engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.