Why Choose the ABB ZX1014 N+PE 20x5mm Busbar 2PW?
The ABB ZX1014 is an N+PE copper busbar designed for compatible ABB sub-distribution assemblies. Supplied under ABB order code 2CPX041883R9999, it provides a dedicated conductive rail for neutral and protective-earth distribution within appropriately configured ABB panel systems.
The ZX1014 has a conductor cross-section of 20 × 5 mm and a length of 500 mm, corresponding to its 2PW / two-field-width configuration. Its solid copper construction provides a manufacturer-matched busbar component for compatible N and PE distribution arrangements.
Designed as part of ABB's sub-distribution accessory range, the ZX1014 enables panel builders to select the correct busbar length and cross-section for compatible modular assemblies. Its 500 mm length makes it suitable for two-field-wide configurations where a 20 × 5 mm copper rail is specified.
Key Advantages
- Purpose-designed N+PE busbar for compatible ABB sub-distribution systems.
- 20 × 5 mm copper conductor provides a substantial conductive cross-section.
- 500 mm length corresponds to the 2PW / two-field-width configuration.
- Suitable for coordinated neutral and protective-earth distribution.
- Manufacturer-matched ABB component simplifies selection for compatible assemblies.
- Solid copper construction supports professional low-voltage panel building.
Key Features
- ABB ZX1014 copper busbar.
- Designed for N+PE applications.
- 2PW / two-field-width configuration.
- 20 mm conductor width.
- 5 mm conductor thickness.
- 20 × 5 mm conductor cross-section.
- 500 mm overall length.
- Designed for compatible ABB sub-distribution assemblies.
- Suitable for modular panel and switchboard construction.
- ABB order code 2CPX041883R9999.
Copper Busbar for Structured N+PE Distribution
The ABB ZX1014 provides a solid 20 × 5 mm copper rail for compatible neutral and protective-earth distribution arrangements. Its 500 mm length is matched to the 2PW format, allowing the busbar to span the corresponding two-field-wide section of a compatible ABB assembly.
Using a manufacturer-specified copper busbar helps create a coordinated internal distribution system with the correct physical dimensions for the intended ABB mounting arrangement. The ZX1014 is therefore suited to new panel construction, system expansion and replacement applications where this exact 20 × 5 mm, 500 mm busbar is specified.
Typical Applications
- ABB sub-distribution assemblies.
- Neutral busbar arrangements.
- Protective-earth busbar arrangements.
- 2PW modular distribution sections.
- Commercial and industrial low-voltage panels.
- Professional switchboard and distribution-board construction.