Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB MT245 is a 2 PW NH2 fuse switch expansion assembly for ABB sub-distribution systems, providing four NH2 positions for a 3-pole busbar installation.
£247.74
The ABB MT245 is a dedicated NH2 fuse switch expansion assembly designed for ABB sub-distribution systems. Supplied under ABB order code 2CPX041327R9999, this 2-panel-width expansion provides a structured solution for integrating NH2 fuse switch disconnectors into compatible distribution cabinets.
The MT245 is designed for use with a 3-pole busbar system and accommodates up to four NH2 fuse switch disconnectors. It is supplied unpopulated for ABB ZH441 NH2 fuse switch disconnectors rated at 400 A, allowing the required switching devices to be selected and installed as part of the finished distribution assembly.
With a width of 500 mm, a capacity of 120 PLE and suitability for cabinets from 225 mm depth, the MT245 provides a practical expansion solution for larger low-voltage distribution installations. It is intended for installation on a compatible WR mounting frame, which must be ordered separately.
NH fuse switch disconnectors combine fuse protection with a means of safely switching and isolating electrical circuits. In larger sub-distribution assemblies, dedicated expansion modules provide the mechanical and busbar arrangement required to integrate these devices in an organised and serviceable format.
The ABB MT245 is configured specifically for NH2 fuse switch disconnectors and a 3-pole busbar system. Its four-device, 2-panel-width arrangement supports the construction of higher-capacity distribution boards while maintaining a consistent ABB system architecture. The required WR mounting frame is ordered separately, and the assembly is not intended for fire-protection housings.
Tick the specs you need, then view products that match.
| Product Series | S&J CombiLine N | |
|---|---|---|
| Current | 630 A | |
| Product group | DESUJ Sub Distribution | |
| ABB order code | 2CPX041327R9999 | |
| Product type | NH2 fuse switch expansion | |
| Panel width | 2 PW | |
| Width | 500 mm | |
| Fuse switch size | NH2 | |
| NH2 positions | 4 | |
| Installation capacity | 120 PLE | |
| Busbar system | 3-pole | |
| Compatible fuse switch disconnector | ABB ZH441, 400 A | |
| Minimum cabinet depth | 225 mm | |
| Mounting system | WR mounting frame | |
| Supplied configuration | Unpopulated expansion assembly |
The ABB MT245 is an NH2 fuse switch expansion assembly used to integrate NH2 fuse switch disconnectors into compatible ABB sub-distribution cabinets.
The MT245 provides positions for up to four NH2 fuse switch disconnectors.
The MT245 is a 2 PW expansion with a width of 500 mm.
The expansion is supplied unpopulated and is designed for ABB ZH441 NH2 fuse switch disconnectors rated at 400 A.
No. The MT245 is designed for installation on a compatible WR mounting frame, which must be ordered separately.
ABB sub-distribution components are widely used by electrical contractors, panel builders and system integrators to create dependable, organised and serviceable low-voltage distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.