Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TE Connectivity Entrelec 1SNA007014R1400 M4/9.PV508/240 is a DIN rail varistor surge protection terminal block rated for a maximum operating voltage of 560 V DC or 420 V AC and a maximum 2.5 kA impulse current.
£6.55
The TE Connectivity Entrelec M4/9.PV508/240, manufacturer part number 1SNA007014R1400, is a compact DIN rail-mounted surge protection terminal block with an integrated varistor designed to protect industrial electrical and electronic circuits against transient overvoltages. It combines circuit connection and surge suppression within a single terminal module, making it well suited to control panels, automation systems and industrial electrical installations.
The M4/9.PV508/240 is designed for circuits with a maximum continuous operating voltage of 560 V DC or 420 V AC. Its integrated metal-oxide varistor responds to short-duration voltage surges by providing a path for transient energy, helping limit potentially damaging voltage levels reaching connected equipment.
With a maximum impulse current capability of 2.5 kA using an 8/20 µs current wave, the 1SNA007014R1400 provides effective transient suppression in compatible industrial circuits. Its screw-clamp terminal format and compact 9 mm terminal spacing support straightforward integration into organised DIN rail assemblies.
Transient overvoltages can arise from switching operations, inductive loads and disturbances within industrial electrical networks. These short-duration voltage spikes can stress sensitive electronic equipment and reduce component service life. A metal-oxide varistor changes its electrical resistance rapidly when an excessive voltage occurs, helping divert surge energy and limit the voltage presented to downstream equipment.
The TE Connectivity Entrelec M4/9.PV508/240 integrates this protective function directly into a DIN rail terminal block. Its 560 V DC / 420 V AC maximum operating voltage and 2.5 kA impulse capability make it a practical solution for compatible higher-voltage control, automation and electrical distribution circuits requiring compact transient protection.
Tick the specs you need, then view products that match.
| Impulse Current Iimp (kA) | 2.5 kA | |
|---|---|---|
| Device Type | Surge protection device | |
| Terminal Type | Feed-through | |
| Product Series | TE SNA | |
| Connection | Screw clamp | |
| Manufacturer | TE Connectivity / Entrelec | |
| Series | M4/9 PV | |
| Model | M4/9.PV508/240 | |
| Manufacturer part number | 1SNA007014R1400 | |
| Product type | Surge protection terminal block | |
| Protection component | Varistor | |
| Maximum operating voltage DC | 560 V DC | |
| Maximum operating voltage AC | 420 V AC | |
| Maximum impulse current | 2.5 kA, 8/20 µs | |
| Minimum varistor voltage at 1 mA DC | 610 V | |
| Maximum varistor voltage at 1 mA DC | 748 V | |
| Peak clamping voltage | 1120 V | |
| Clamping test current | 25 A, 8/20 µs | |
| Capacitance | 220 pF | |
| Connection technology | Screw clamp | |
| Terminal spacing | 9 mm | |
| Mounting type | DIN rail | |
| Protection rating | IP20 | |
| Wire stripping length | 8.5 mm | |
| Recommended tightening torque | 0.4–0.6 Nm | |
| EAN / Barcode | 3472590070140 |
The 1SNA007014R1400 is a DIN rail surge protection terminal block with an integrated varistor, designed to help protect compatible industrial electrical and electronic circuits against transient overvoltages.
The M4/9.PV508/240 has a specified maximum continuous operating voltage of 560 V DC.
Yes. The M4/9.PV508/240 is specified for a maximum operating voltage of 420 V AC as well as 560 V DC.
The surge protector has a specified maximum impulse current of 2.5 kA using an 8/20 µs current wave.
The M4/9.PV508/240 has a specified peak clamping voltage of 1120 V at 25 A using an 8/20 µs test wave.
TE Connectivity Entrelec surge protection terminal blocks provide compact, practical protection solutions for industrial control, automation and electrical distribution systems where dependable connections and transient overvoltage suppression are required.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.