Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Mersen HP15M25CC 25 A photovoltaic fuse with a 1500 V DC rating, 50 kA breaking capacity and crimp-cap terminals for PV string protection.
The Mersen HP15M25CC is a specialist 25 A photovoltaic fuse designed to protect PV string wiring in commercial and utility-scale solar power installations. Part of the established Mersen HP15M HelioProtection series, this fuse is rated for operation at up to 1500 V DC, making it suitable for modern high-voltage photovoltaic arrays.
Photovoltaic systems can generate low-level reverse currents that conventional industrial fuses may not interrupt effectively. The HP15M25CC is engineered specifically for these conditions, providing reliable interruption from approximately 1.35 times its rated current while also offering a high short-circuit breaking capacity.
With a rated current of 25 A, a 50 kA DC breaking capacity and dedicated crimp-cap terminals, the HP15M25CC supports secure solderless integration into in-line cable assemblies. Its robust construction helps withstand the repeated temperature and current cycling commonly encountered in photovoltaic installations.
Photovoltaic arrays can experience reverse-current faults when individual modules or strings operate unevenly. These fault currents may be lower than those found in conventional electrical systems, making it important to use a fuse designed specifically for PV operating conditions.
The Mersen HP15M25CC helps isolate faulty circuits before excessive current can damage photovoltaic modules, string wiring, connectors or combiner equipment. Its crimp-cap design enables direct connection to suitable conductors, making it particularly useful for sealed, overmoulded and in-line solar cable assemblies.
Tick the specs you need, then view products that match.
| Voltage | 1500 V | |
|---|---|---|
| Current | 25 A | |
| Device Type | Fuse link | |
| Fuse Type | PV (gPV) | |
| Fuse Size | 10x85 mm | |
| Manufacturer | Mersen | |
| Series | HP15M HelioProtection | |
| Model | HP15M25CC | |
| Product type | Photovoltaic cartridge fuse | |
| Application class | gPV | |
| Rated current | 25 A | |
| Rated voltage | 1500 V DC | |
| Breaking capacity | 50 kA DC | |
| Minimum breaking current | approximately 1.35 × rated current | |
| Fuse size | 10 × 85 mm | |
| Terminal type | Crimp cap | |
| Mounting type | In-line cable connection | |
| Fuse operation | Single use | |
| UL standard | UL 2579 | |
| IEC standard | IEC 60269-6 |
The HP15M25CC is used to protect photovoltaic string wiring, solar modules and associated DC equipment against overcurrent and short-circuit faults.
The Mersen HP15M25CC has a rated current of 25 A.
The HP15M25CC is rated for photovoltaic systems operating at up to 1500 V DC.
The CC suffix identifies the fuse’s crimp-cap terminals, which permit a secure solderless connection between the fuse and suitable photovoltaic wiring.
The fuse has a rated breaking capacity of 50 kA DC, enabling dependable interruption of high fault currents in photovoltaic circuits.
Mersen HelioProtection photovoltaic fuses are widely used by solar installers, panel builders and renewable energy equipment manufacturers to protect high-voltage PV strings and associated DC components.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.