Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
131L7806 Danfoss VLT FC-102 HVAC Drive 315 kW / 450 HP, 380 – 480 VAC, IP54
Danfoss 131L7806 VLT HVAC Drive FC 102, a 315 kW / 450 HP three phase AC variable frequency drive with 380-480 V AC input, IP54 / Type 12 enclosure, RFI Class A2 filter, Safe Stop, mains disconnect and fuse for HVAC motor control applications.
Danfoss 131L7806 at a glance
The Danfoss 131L7806 is a 315 kW / 450 HP VLT HVAC Drive FC 102 for 3 × 380–480 V AC supplies, made for the fans, pumps and compressors in building services. It is an IP54 / UL Type 12 unit, built for wall mounting in plant rooms without a separate enclosure.
This configuration has RFI class A2 (C3), safe Stop, no brake chopper, and a graphical LCP 102 control panel. The full type code is decoded alongside the FAQs.
Sizing and installation
- Enclosure: IP54 / UL Type 12 — built for wall mounting in plant rooms without a separate enclosure.
- EMC: RFI class A2 (C3). Check the permitted screened motor cable length in the Danfoss FC 102 Design Guide.
FC 102 features for HVAC
- Built-in RS-485 protocols: Danfoss FC, Modbus RTU, BACnet MS/TP, Metasys N2 and FLN Apogee — connects to most building management systems without an option card.
- Fire Mode keeps the drive running during an emergency, for example to keep smoke-extract fans turning.
- Automatic Energy Optimisation (AEO) cuts motor losses at part load — Danfoss quotes a further 5–15% saving.
- Pump and fan functions: sleep mode, dry-pump, end-of-curve and broken-belt detection, plus a built-in cascade controller for pump sets.
- Built-in DC coils limit mains harmonics (EN 61000-3-12).
- Smart Logic Controller for simple sequencing without a PLC.
Where the energy saving comes from
Centrifugal fans and pumps follow the affinity laws: absorbed power falls with the cube of speed. Running at 80% speed needs roughly half the power of full speed (0.8³ ≈ 0.51, before motor and drive losses) — which is why speed control pays back faster on fans and pumps than almost any other load.
Other sizes and enclosures
Same 315 kW rating, other enclosures
This driveIP54Danfoss 131L7806IP54 / UL Type 12
EnclosureIP00Danfoss 131B6956IP00 / chassisView drive →
EnclosureIP20Danfoss 134F9231IP20 / chassisView drive →
EnclosureRefer to the Danfoss FC 102 type-code guideDanfoss 135U8572Refer to the Danfoss FC 102 type-code guideView drive →
Typical applications
✓ Supply and extract fans in air-handling units
✓ Chilled- and hot-water circulation pumps
✓ Cooling towers and condenser fans
✓ Booster sets and multi-pump stations
✓ Ventilation and smoke-extract systems
Technical Specifications
Tick the specs you need, then view products that match.
| Power | 315 kW | |
|---|---|---|
| Voltage | 480 V | |
| Phase | Three Phase | |
| IP Rating | IP54 | |
| EMC Filter | Industrial | |
| Series | VLT HVAC Drive FC 102 | |
| Part number | 131L7806 | |
| Product type | AC variable frequency drive | |
| Rated output power | 315 kW / 450 HP | |
| Input voltage | 380–480 V AC | |
| Input phases | 3-phase | |
| Output phases | 3-phase | |
| Protection rating | IP54 / Type 12 | |
| RFI filter | Class A2 (C3) | |
| Safety function | Safe Stop | |
| Mains option | Mains disconnect and fuse | |
| A option | No A option | |
| B option | No B option | |
| PCB coating | Coated PCB | |
| Drive range | Danfoss VLT HVAC Drive FC 102 |
Frequently asked questions
Which communication protocols are built in?
Danfoss FC, Modbus RTU, BACnet MS/TP, Metasys N2 and FLN Apogee over the built-in RS-485 port. This unit has no fieldbus option card fitted, so PROFIBUS, PROFINET, EtherNet/IP or BACnet/IP would need an MCA option card.
Can this drive be wall mounted without a panel?
Yes. The IP54 / UL Type 12 enclosure is designed for direct mounting.
Type code decoded
FC-102P315T4E54H2TGC3XXSXXXXAXBXCXXXXDX
G fitted / defines this unit X not fitted / standard
| Product series Position 1–6 | VLT HVAC Drive FC 102 | FC-102 |
|---|---|---|
| Power size Position 7–10 | 315 kW / 450 HP | P315 |
| Mains voltage Position 11–12 | 3 × 380–480 V AC | T4 |
| Enclosure Position 13–15 | IP54 / UL Type 12 | E54 |
| RFI filter Position 16–17 | RFI class A2 (C3) | H2 |
| Brake / Safe Stop Position 18 | Safe Stop, no brake chopper | T |
| Local control panel Position 19 | Graphical LCP 102 | G |
| PCB coating Position 20 | Conformal-coated PCBs | C |
| Mains option Position 21 | Mains disconnect + fuses | 3 |
| Adaptation A Position 22 | Standard cable entries | X |
| Adaptation B Position 23 | Standard | X |
| Software release Position 24–27 | Latest standard release | SXXX |
| Software language Position 28 | Standard language package | X |
| A option (fieldbus) Position 29–30 | No fieldbus option | AX |
| B option (I/O) Position 31–32 | No B option | BX |
| C0 option Position 33–34 | No C0 option | CX |
| C1 option Position 35 | No C1 option | X |
| C option software Position 36–37 | None | XX |
| D option Position 38–39 | No D option | DX |
