Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
131B6549 Danfoss VLT FC-102 HVAC Drive 110 kW / 150 HP, 380 – 480 VAC, IP00
Danfoss 131B6549 VLT HVAC Drive FC 102, rated at 110 kW / 150 HP for 380-480 V AC three-phase HVAC motor control applications, supplied as an IP00 chassis drive with RFI Class A1/C2 filter, graphical local control panel, no brake chopper and no mains option.
This product has been discontinued
A direct replacement is available below.
Replacement product
Danfoss VLT HVAC Drive 110KW/150HP 380-480VAC IP20
SKU: 134F0376
£5,766.20 ex VAT
View
£6,274.40
Danfoss 131B6549 at a glance
The Danfoss 131B6549 is a 110 kW / 150 HP VLT HVAC Drive FC 102 for 3 × 380–480 V AC supplies, made for the fans, pumps and compressors in building services. It is a frame D3, IP00 / chassis unit, built for mounting inside a control panel or enclosure.
This configuration has RFI class A1 (C2), no brake chopper, and a graphical LCP 102 control panel. The full type code is decoded alongside the FAQs.
Sizing and installation
- Enclosure: IP00 / chassis — built for mounting inside a control panel or enclosure.
- EMC: RFI class A1 (C2). Check the permitted screened motor cable length in the Danfoss FC 102 Design Guide.
FC 102 features for HVAC
- Built-in RS-485 protocols: Danfoss FC, Modbus RTU, BACnet MS/TP, Metasys N2 and FLN Apogee — connects to most building management systems without an option card.
- Fire Mode keeps the drive running during an emergency, for example to keep smoke-extract fans turning.
- Automatic Energy Optimisation (AEO) cuts motor losses at part load — Danfoss quotes a further 5–15% saving.
- Pump and fan functions: sleep mode, dry-pump, end-of-curve and broken-belt detection, plus a built-in cascade controller for pump sets.
- Built-in DC coils limit mains harmonics (EN 61000-3-12).
- Smart Logic Controller for simple sequencing without a PLC.
Where the energy saving comes from
Centrifugal fans and pumps follow the affinity laws: absorbed power falls with the cube of speed. Running at 80% speed needs roughly half the power of full speed (0.8³ ≈ 0.51, before motor and drive losses) — which is why speed control pays back faster on fans and pumps than almost any other load.
Other sizes and enclosures
Same configuration, different power
This drive110 kWDanfoss 131B6549IP00 / chassis · frame D3
Larger160 kWDanfoss 131B6938IP00 / chassis · frame D4View drive →
Same 110 kW rating, other enclosures
This driveIP00Danfoss 131B6549IP00 / chassis
EnclosureIP20Danfoss 134F0376IP20 / chassisView drive →
EnclosureIP21Danfoss 131B6928IP21 / UL Type 1View drive →
EnclosureIP54Danfoss 131B6930IP54 / UL Type 12View drive →
Typical applications
✓ Supply and extract fans in air-handling units
✓ Chilled- and hot-water circulation pumps
✓ Cooling towers and condenser fans
✓ Booster sets and multi-pump stations
✓ Ventilation and smoke-extract systems
Technical Specifications
Tick the specs you need, then view products that match.
| Power | 110 kW | |
|---|---|---|
| Voltage | 480 V | |
| Phase | Three Phase | |
| IP Rating | IP00 | |
| EMC Filter | Commercial | |
| Model code | FC-102P110T4E00H4XGXXXXSXXXXAXBXCXXXXDX | |
| Drive series | VLT HVAC Drive FC 102 | |
| Product type | Variable frequency drive / HVAC inverter drive | |
| Power rating | 110 kW / 150 HP | |
| Supply voltage | 380–480 V AC | |
| Input phase | Three-phase | |
| Enclosure rating | IP00 / chassis | |
| Frame size | D3 | |
| Control panel | Graphical Local Control Panel | |
| RFI filter | Class A1 / C2 | |
| Brake chopper | No brake chopper | |
| Mains option | No mains option | |
| A option | No A option | |
| B option | No B option | |
| C1 option | No C1 option | |
| D option | No D option | |
| PCB coating | Not coated PCB |
Frequently asked questions
Which communication protocols are built in?
Danfoss FC, Modbus RTU, BACnet MS/TP, Metasys N2 and FLN Apogee over the built-in RS-485 port. This unit has no fieldbus option card fitted, so PROFIBUS, PROFINET, EtherNet/IP or BACnet/IP would need an MCA option card.
Does this drive need to go in an enclosure?
Yes. IP00 / chassis drives are designed to be mounted inside a control panel or enclosure. For wall mounting without a panel, choose an IP55 or IP66 version.
Type code decoded
FC-102P110T4E00H4XGXXXXSXXXXAXBXCXXXXDX
G fitted / defines this unit X not fitted / standard
| Product series Position 1–6 | VLT HVAC Drive FC 102 | FC-102 |
|---|---|---|
| Power size Position 7–10 | 110 kW / 150 HP | P110 |
| Mains voltage Position 11–12 | 3 × 380–480 V AC | T4 |
| Enclosure Position 13–15 | IP00 / chassis | E00 |
| RFI filter Position 16–17 | RFI class A1 (C2) | H4 |
| Brake / Safe Stop Position 18 | No brake chopper | X |
| Local control panel Position 19 | Graphical LCP 102 | G |
| PCB coating Position 20 | Standard (uncoated) PCBs | X |
| Mains option Position 21 | No mains option | X |
| Adaptation A Position 22 | Standard cable entries | X |
| Adaptation B Position 23 | Standard | X |
| Software release Position 24–27 | Latest standard release | SXXX |
| Software language Position 28 | Standard language package | X |
| A option (fieldbus) Position 29–30 | No fieldbus option | AX |
| B option (I/O) Position 31–32 | No B option | BX |
| C0 option Position 33–34 | No C0 option | CX |
| C1 option Position 35 | No C1 option | X |
| C option software Position 36–37 | None | XX |
| D option Position 38–39 | No D option | DX |
